It is commonly accepted that for the analysis of wood beams, the neutral axis coincides with the centroid of the beam. Although this assumption is used in analysis, wood is not an isotropic material, as it has different elastic properties in the tangential, radial and longitudinal directions, nor is it...
As part of a roof framing system, light-frame wood trusses often require lateral bracing to reduce the effective length for flexural buckling of compression web members. This observational research investigates the design requirements for discrete compression web bracing intended to provide such lateral support. Four simple brace analysis methods based...
In recent years, log structures have been marketed as an alternative
to conventional light-frame wood structures. Log structures are constructed
using round timbers (or manufactured timbers) that are stacked vertically
and have interlocking corners. Thru-rods and lag screws are used to
provide inter-log connections. This project was conducted to evaluate...
The Horsetail Creek (HC) bridge is an example of an Oregon bridge that was classified as structurally deficient and was not designed to withstand earthquake (EQ) excitations. A fiber-reinforced polymer (FRP) rehabilitation was performed on the HC bridge to increase flexural and shear capacities for traffic loads. However, a seismic...
A commercially available, three-dimensional (3-D) finite-element (FE) analysis
program was used to model metal-plate-connected (MPC) joints in wooden trusses.
The model's features included consideration of material properties, teeth-to-grain-to-direction-
of-force orientation, and wood-to-wood contact. Non-linear spring elements,
placed on the wood surface between wood and plate, were used to represent wood-to-teeth...
Metal-plate-connected (MPC) trusses have traditionally been designed based on a
tributary load distribution and a simplified truss model. This design method ignores the
load-sharing and composite action in MPC roof truss systems, the semi-rigidity of MPC
joints, and joint eccentricity.
The main objective of this study was to provide a...
The objective of this research was to evaluate the duration of load factor for
metal-plate-connected (MPC) truss joints subjected to various cyclic loading conditions.
Heel and tension-splice joints from a standard 30-foot span Fink truss constructed from
nominal 2x4 Douglas-fir lumber were tested. A testing frame similar to that developed...
The objective of this research was to develop a one-third scale model of full-size
(prototype) metal-plate-connected (MPC) wood truss joints using similitude theory. The
prototype metal connector plates in MPC joints were modeled using thin galvanized sheet
metal and short staples. Truss grade wood material was ripped to one-third scale...
This study presents a practical method to model an actual Metal-Plate-
Connected (MPC) roof truss assembly using a commercial program, SAP2000, to
investigate its system performance. Truss assembly modeling was examined
because the conventional single truss design method ignores system effects, such as
variability of modulus of elasticity (MOE), interaction...
The objectives of this research were to evaluate the
behavior of actual metal-plate-connected (MPC) tension-splice
and heel wood truss joints under seismic loads from the
Northridge earthquake (tension-splice joints only) and under
loads from a large artificial earthquake (1.0 g's and 0.67
g's maximum horizontal and vertical accelerations,
respectively). A...