Search Constraints

Start Over
Filtering by: Creator Chen, Peter Y. S. Remove constraint Creator: Chen, Peter Y. S. Advisor Moon, Un Ku Remove constraint Advisor: Moon, Un Ku Rights Statement In Copyright Remove constraint Rights Statement: In Copyright

Search Results

  • Duty-cycle controlled switched resistor techniques for continuously tunable, low-voltage circuits

    Creator:
    Kurahashi, Peter
    Abstract:
    A duty-cycle controlled switched resistor is a tunable resistive element that uses pulse width modulation as the method of tuning. This thesis will describe the operation of switched resistors and propose several circuit architectures that are well suited to the use of switched resistors. These architectures include filters, mixers, and...
    Resource Type:
    Dissertation
    Full Text:
    - trary LPTV system is given by Y (s) = ∞ ∑ n=−∞ Hn(s)U(s− jnω0), (2.10) where Hn(s) are the HTFs of

  • Low voltage techniques for pipelined analog-to-digital converters

    Creator:
    Carnes, Joshua Kenneth
    Abstract:
    To realize pipelined ADCs in deep-submicron processes, low voltage techniques must be developed to work around problems created by limited supply voltages such as the floating switch dead zone, reduced SNR, and reduced OpAmp performance. This thesis analyzes standard and low voltage design issues for pipelined ADCs and proposes a...
    Resource Type:
    Masters Thesis
    Full Text:
    0.6 0.8 1 1.2 1.4 S up pl y V ol ta ge (V ) Figure 1: Dimension and voltage scaling

  • Energy and area efficient techniques for data converters

    Creator:
    Venkatram, Hariprasath
    Abstract:
    Data converters are ubiquitous building blocks of a signal chain. The rapid increase in communication and connectivity devices presents new avenues for pushing the state of the art analog to digital converters. Techniques for improving resolution, bandwidth, linearity and bit-error rate, while reducing the power, energy and area is the...
    Resource Type:
    Dissertation
    Full Text:
    at 20 MS/s. Built in 1P4M 0.18 µm technology and operating at 1.3 V sup- ply, the ADC consumes 5.9

  • Ring Amplifier Optimized for High Resolution Analog-to-Digital Converter Applications

    Creator:
    ElShater, Ahmed O.
    Abstract:
    In recent years, SAR ADCs have been shown to acheive faster conversion times and improved power efficiencies due to their simple building blocks that are digital in nature and scale favorably with technology. High resolution ADCs with stringent noise requirement has led to the adoption of hybrid ADC architectures such...
    Resource Type:
    Dissertation
    Full Text:
    implemented in 0.18µm technology achieves a DR of 95dB and a Schreier FOM better than 180dB at both 2MS/s and

  • Design techniques for low-voltage and low-power analog-to-digital converters

    Creator:
    Ahn, Gil Cho
    Abstract:
    With the ever-increasing demand for portable devices used in applications such as wireless communication, mobile computing, consumer electronics, etc., the scaling of the CMOS process to deep submicron dimensions becomes more important to achieve low-cost, low-power and high-performance digital systems. However, this downscaling also requires similar shrinking of the supply...
    Resource Type:
    Dissertation
    Full Text:
    delta-sigma ADC, a 0.9 V, 10-bit, 20MS/s CMOS pipelined ADC and a 2.4 V, 12-bit, 10MS/s CMOS pipelined

  • Low-power design techniques for low-voltage analog-to-digital converters

    Creator:
    Kim, Min Gyu
    Abstract:
    The demand for portable electronic systems and the continued down-scaling of device dimensions resulted in rapid improvement in the performance of integrated systems. Several low-voltage design techniques have been proposed to operate analog circuits with sub-1V supply. However, these techniques require higher power consumption to achieve large dynamic range while...
    Resource Type:
    Dissertation
    Full Text:
    -loop. A 0.9V 92dB delta-sigma audio ADC and a 10MS/s 11-b algorithmic ADC were implemented to

  • Efficient use of time information in analog-to-digital converters

    Creator:
    Hu, Yue
    Abstract:
    Time-domain data conversion has recently drawn increased research attention for its highly digital nature in favor of process technology scaling. Also, as the time information being carried by binary voltage, time-domain operation is much less sensitive to voltage noise compared to conventional voltage domain operation. However, for analog-to-digital converter (ADC)...
    Resource Type:
    Dissertation
    Full Text:
    of ADCs. 3 6 30 D e la y ( p s ) Technology Generation (nm) Typical Gate Delay

  • High-performance delta-sigma analog-to-digital converters

    Creator:
    da Silva, Jose Barreiro
    Abstract:
    Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
    Resource Type:
    Dissertation
    Full Text:
    -art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However, inherent

  • Power-Efficient Design Techniques and Architectures for Scalable Submicron Analog Circuits

    Creator:
    Xu, Yang
    Abstract:
    As the CMOS process scales down to submicron, digital circuit performance improves, while reduced supply voltage and lower transistor intrinsic gain make it difficult to implement analog circuits in a power efficient manner. Therefore, it has become advantageous to shift more analog signal processing functions conventionally realized in voltage (analog)...
    Resource Type:
    Dissertation
    Full Text:
    scaling-compatible implementation. A 4th-order BPF prototype operating at a 1.2GS/s sampling rate is

  • Design techniques for time based data converters

    Creator:
    Gande, Manideep
    Abstract:
    Modern day CMOS processes are characterized by voltage scaling and geometry scaling. Geometry scaling helps reduce gate delays, thereby aiding in the design of data converters which use time based processing. Another artifact of geometry scaling is the increase in complexity of digital circuitry available on traditional analog ICs, as...
    Resource Type:
    Dissertation
    Full Text:
    Waters, Peter Kurahashi and Sunwoo Kwon. I had a real great time interacting with you guys. I learnt a