Digital phase-locked loops (PLLs) have been receiving increasing attention recently due to their ease of integration, scalability and performance comparable to their analog counterparts. In digital PLLs, increased resolution in time-to-digital conversion is desirable for improved noise performance. This work describes the design and simulation of a stochastic time-to-digital converter...
Advances in process technologies have led to the development of low-power high speed digital signal processing blocks that occupy small areas. These advances are critical in the development of portable electronic devices with small feature size and long battery life. However, the design of analog and mixed-signal
building blocks, especially...
The demand for portable electronic systems and the continued
down-scaling of device dimensions resulted in rapid improvement in
the performance of integrated systems. Several low-voltage design
techniques have been proposed to operate analog circuits with sub-1V
supply. However, these techniques require higher power consumption
to achieve large dynamic range while...
The continued scaling of deep-submicron CMOS technology enables low-voltage high-frequency phase-locked loops (PLLs) to be fully integrated in complex mixed-signal systems. However, fluctuations due to the manufacturing process and variations in
environmental conditions, such as supply voltage and temperature, are also significantly increased. As a result, the performance of PLLs...
The design of mixed-signal integrated circuits has evolved from simple analog and digital circuits operating on the same silicon substrate to the point that now we have complete system on a chip solutions for communication systems. The levels of integration needed to remain cost effective in today's integrated circuit (IC)...
Analog-to-digital converters (ADCs) convert analog
continuous time signals into discrete time, digital format. One
precondition that must be met for conventional nyquist rate ADCs is
that the input signal must be suitably band-limited to an input
bandwidth less than the nyquist frequency. This mandates expensive
anti-alias filters which contribute to...
As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are...
Data converters are ubiquitous building blocks of a signal chain. The rapid increase in
communication and connectivity devices presents new avenues for pushing the state of
the art analog to digital converters. Techniques for improving resolution, bandwidth,
linearity and bit-error rate, while reducing the power, energy and area is the...
This dissertation presents a phase domain in-loop-bandwidth spread-spectrum clock generation technique. In this proposed technique, a charge-based discrete-time loop filter is proposed to enable the phase domain in-loop-bandwidth spread-spectrum modulation without a delta-sigma modulator or time-to-digital converter. The in-loop-bandwidth modulation technique maximizes the loop bandwidth to improve phase noise suppression...
Hand-held devices are among the most successful consumer electronics in modern society. Behind these successful devices, lies a key analog design technique that involves high-performance analog-to-digital conversion combined with very low power consumption. This dissertation presents two different approaches to achieving high power efficiency from a two-step pipelined architecture, which...
Time-domain data conversion has recently drawn increased research attention for its highly digital nature in favor of process technology scaling. Also, as the time information being carried by binary voltage, time-domain operation is much less sensitive to voltage noise compared to conventional voltage domain operation. However, for analog-to-digital converter (ADC)...
Modern day CMOS processes are characterized by voltage scaling and geometry scaling. Geometry scaling helps reduce gate delays, thereby aiding in the design of data converters which use time based processing. Another artifact of geometry scaling is the increase in complexity of digital circuitry available on traditional analog ICs, as...
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...
Real world is analog but the processing of signals can best be done in digital domain. So the need for Analog to Digital Converters(ADCs) is ever rising as more and more applications set in. With the advent of mobile technology, power in electronic equipment is being driven down to get...
In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
This thesis presents methods to reduce the effects of finite opamp DC gain, output voltage swing limitations in opamps, and component mismatches. The primary contribution of this thesis is a new switched-capacitor method named correlated level shifting (CLS). CLS enables true rail-to-rail operation by storing an estimate of the desired...