Search Constraints

Start Over
Filtering by: Conference section Thresholds/Monitoring/Sampling Remove constraint Conference section: Thresholds/Monitoring/Sampling Advisor Temes, Gabor C. Remove constraint Advisor: Temes, Gabor C.

Search Results

  • Dynamic Error Calibration for Continuous-Time Delta-Sigma Modulator with Multi-GHz Sampling Rate

    Creator:
    He, Tao
    Abstract:
    Continuous-time ΔΣ modulators are widely used in cellular handsets due to their power efficiency and inherent anti-aliasing characteristics. To achieve demanding cellular bandwidth requirements while maintaining good power efficiency, multi-bit feedback is typically used. This approach provides benefits such as lower OSR, relaxed loop filter requirements, and reduced jitter sensitivity....
    Resource Type:
    Dissertation
    Full Text:
    . Title: Dynamic Error Calibration for Continuous-Time Delta-Sigma Modulator with Multi-GHz Sampling

  • Design techniques for low power ADCs

    Creator:
    Yu, Wenhuan
    Abstract:
    This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise. In the calibration mode, the incremental ADC...
    Resource Type:
    Dissertation
    Full Text:
    in single-sampling or double-sampling mode. Chopping with a fractal sequence is used to eliminate 1

  • Improved design techniques for analog and mixed circuits

    Creator:
    Nishida, Yoshio
    Abstract:
    Although the digital revolution can realize many of past analog components in the digital forms, our world is surrounded with analog signals such as voice, temperature, etc. The bridge between these two worlds is one of key performance limitations among overall systems and it includes analog filters and data converters....
    Resource Type:
    Dissertation
    Full Text:
    is a proposed correlated double- sampling technique for continuous analog filters. A circuit

  • Low-voltage pipeline A/D converter

    Creator:
    Wu, Lei
    Abstract:
    Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor (SC) circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low voltage conditions. There exist three techniques to solve the problem, but with their...
    Resource Type:
    Masters Thesis
    Full Text:
    . Multi-threshold process increases cost. Boosted clock will cause life time reliability issues

  • Error canceling low voltage SAR-ADC

    Creator:
    Wen, Jianping
    Abstract:
    The design of a switched capacitor successive approximation A/D converter is discussed in this thesis. This design adopts a novel capacitance mismatch error cancellation algorithm proposed in references [25, 27]. Detailed charge domain analysis is given in this thesis, which results in an improvement of the proposed algorithm by tracing...
    Resource Type:
    Masters Thesis
    Full Text:
    theoretical work analyzing the inadequacy of normal predictive correlated double sampling (CDS) technique to

  • MOSFET-only predictive track and hold circuit

    Creator:
    Qiu, Xiangping
    Abstract:
    High-accuracy and high-speed CMOS track-and-hold (T/H) or sample-and-hold (S/H) circuits are an important part of the analog-to-digital interface. The switched-capacitor (SC) circuits usually contain one or more op-amps whose dc offset, finite gain, finite bandwidth have a big impact on the accuracy of the track-and-hold circuit. Basic correlated double sampling...
    Resource Type:
    Masters Thesis
    Full Text:
    impact on the accuracy of the track-and-hold circuit. Basic correlated double sampling (CDS) scheme can

  • Process segmentation and modelling applied to time series featuring the response of biological materials to toxic agents

    Creator:
    Teng, Angela
    Abstract:
    The detection of biological and chemical toxins has become one of the main concerns in environmental and military fields. In this framework, the department of Microbiology and Biochemistry at Oregon State University has discovered that fish living cells are promising indicators of the presence of a wide range of toxins....
    Resource Type:
    Masters Thesis
    Full Text:
    that the combined error of all segments is less than a user-specified threshold and that the maximum

  • Low-Power 12-bit Quasi-Passive Segmented DAC Implemented in 130nm CMOS Technology

    Creator:
    Pierce, Alexander G.
    Abstract:
    This thesis work proposes a low-power 12-bit digital-to-analog converter (DAC) designed in a 130nm process. The DAC to be presented is of a segmented design where the architecture is split into pipelined and thermometer coded segments. This allows for high linearity and low distortion while maintaining high speed and low...
    Resource Type:
    Masters Thesis
    Full Text:
    , an output buffer stage is added to allow for a wide range of loads. Correlated double sampling (CDS

  • A 90.5dB DR 1MHz BW Hybrid Two Step ADC with CT Incremental and SAR ADCs

    Creator:
    Wang, Yanchao
    Abstract:
    The sensors in real time data processing IoT devices require high resolution and sub-MHz data converters, usually implemented as Incremental ADCs due to the advantages of oversampling technique and low latency. In discrete time incremental (IDT) ADCs, the sampling switch non-linearity, charge injection degrade the resolution, and power hungry OPAMPs...
    Resource Type:
    Dissertation

  • High efficiency delta-sigma modulation data converters

    Creator:
    Lee, Kyehyung
    Abstract:
    Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common...
    Resource Type:
    Dissertation
    Full Text:
    double-sampling delta-sigma ADCs and improved low-distortion delta-sigma ADC are proposed, and

  • Switched Capacitor Circuit Techniques for High Performance CMOS Analog Circuits

    Creator:
    Kareppagoudr, Manjunath
    Abstract:
    Switched capacitor (SC) circuits are the main building blocks in many structures such as filters, data converters, sampling circuits and sampled-data amplifiers. The key challenge is to design such circuits which are the prime components of any IoT system with low power consumption without compromising on the performance. In this...
    Resource Type:
    Dissertation
    Full Text:
    , sampling circuits and sampled-data amplifiers. The key challenge is to design such circuits which are the

  • Low power high resolution data converter in digital CMOS technology

    Creator:
    Zheng, Zhiliang
    Abstract:
    The advance of digital IC technology has been very fast, as shown by rapid development of DSP, digital communication and digital VLSI. Within electronic signal processing, analog-to-digital conversion is a key function, which converts the analog signal into digital form for further processing. Recently, low-voltage and low-power have become also...
    Resource Type:
    Masters Thesis
    Full Text:
    . The implementation include a new differential sampling that is used to achieve ratio-independent

  • Design techniques of high-performance switched capacitor circuits in the presence of component imperfections

    Creator:
    Huang, Yunteng
    Abstract:
    This thesis describes design techniques for high-performance switched-capacitor (SC) circuits, primarily for high-linearity low-noise SC circuits in the presence of component imperfections, such as nonlinear op-amp voltage transfer characteristics, capacitor nonlinearities as well as the finite op-amp dc gain and op-amp offset and noise. Various correlated-double-sampling (CDS) schemes are discussed,...
    Resource Type:
    Dissertation
    Full Text:
    correlated-double-sampling (CDS) schemes are discussed, and some novel predictive CDS schemes are proposed

  • Improved design techniques for low-voltage low-power switched-capacitor delta-sigma modulators

    Creator:
    Grilo, Jorge
    Abstract:
    This dissertation investigates the constraints which arise when switched-capacitor (SC) delta-sigma modulators are designed for low-voltage operation, targeting also low power dissipation, and proposes methods of improving the performance and optimizing for low power dissipation. This is accomplished by identifying critical elements whose performance can lead to increased power dissipation,...
    Resource Type:
    Dissertation
    Full Text:
    sampling is one of such techniques and is analyzed in detail. ©Copyright by Jorge Grilo June 27, 1997

  • Fast opamp-free delta sigma modulator

    Creator:
    Thomas, Daniel E.
    Abstract:
    Switched-capacitor (SC) circuits are commonly used for analog signal processing because they can be used to realize precision filters and data converters on an integrated circuit (IC). However, for high speed applications SC circuit operating speeds are limited by the internally-compensated opamps found in SC integrators, a common building block...
    Resource Type:
    Masters Thesis
    Full Text:
    . The proposed integrator also incorporates correlated double sampling (CDS) to boost its effective DC

  • Compensation techniques for cascaded delta-sigma A/D converters and high-performance switched-capacitor circuits

    Creator:
    Sun, Tao
    Abstract:
    This thesis describes compensation techniques for cascaded delta-sigma A/D converters (ADCs) and high-performance switched-capacitor (SC) circuits. Various correlated-double-sampling (CDS) techniques are presented to reduce the effects of the nonidealities, such as clock feedthrough, charge injection, opamp input-referred noise and offset, and finite opamp gain, in SC circuits. A CDS technique...
    Resource Type:
    Dissertation
    Full Text:
    correlated-double-sampling (CDS) techniques are presented to reduce the effects of the nonidealities, such

  • High-accuracy circuits for on-chip capacitor ratio testing and sensor readout

    Creator:
    Wang, Bo, 1970-
    Abstract:
    The precise measurement of a capacitance difference or ratio in a digital form is very important for capacitive sensors, for CMOS process characterization as well as for the realization of precise switched-capacitor data converters, amplifiers and other circuits utilizing ratioed capacitors. This thesis introduces design techniques for on-chip capacitor ratio...
    Resource Type:
    Dissertation
    Full Text:
    circuits are introduced, and the correlated-double-sampling (CDS) technique is used in the circuits to

  • Low-power double-sampled delta-sigma modulator for broadband applications

    Creator:
    Shen, Weilun
    Abstract:
    High speed and high resolution analog-to-digital converter is a key building block for broadband wireless communications, high definition video applications, medical images and so on. By leveraging the down scaling of the latest CMOS technology and the noise shaping properties, delta-sigma (ΔΣ) ADCs are able to achieve wide-band operation and...
    Resource Type:
    Dissertation
    Full Text:
    : 1. Double sampled integrator to increase the effective over-sampling ratio. 2. Capacitor

  • Design techniques for wideband low-power Delta-Sigma analog-to-digital converters

    Creator:
    Wang, Yan
    Abstract:
    Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are traditionally used in high quality audio systems, instrumentation and measurement (I&M) and biomedical devices. With the continued downscaling of CMOS technology, they are becoming popular in wideband applications such as wireless and wired communication systems,high-definition television and radar systems. There are two general realizations...
    Resource Type:
    Dissertation
    Full Text:
    can achieve lower power dissipation and higher sampling frequency than its DT counterpart. In this

  • Active Noise Shaping Analog-to-Digital Data Converters

    Creator:
    Shi, Lukang
    Abstract:
    Successive-approximation-register (SAR) analog-to-digital converters are popular for medium accuracy, medium speed and low power applications, such as in biomedical applications. They have low latency and simple architecture compared with ΔΣ ADCs. This is because of SAR ADCs’ binary searching scheme. Furthermore, SAR ADCs can apply oversampling and noise shaping schemes...
    Resource Type:
    Dissertation
    Full Text:
    DAC calibration was proposed and implemented. Correlated double sampling (CDS) and correlated level