Search Constraints

Start Over
Filtering by: Alternative title ssim Technical note no. F-21 Remove constraint Alternative title ssim: Technical note no. F-21 Advisor Wager, John F. Remove constraint Advisor: Wager, John F. Committee Member Ostroverkhova, Oksana Remove constraint Committee Member: Ostroverkhova, Oksana

Search Results

  • DC/AC Stability of In-Ga-Zn-O Thin-Film Transistors

    Creator:
    Zhou, Fan
    Abstract:
    The electrical stability of amorphous indium-gallium-zinc oxide (a-IGZO) thinfilmtransistors (TFTs) is investigated for flat-panel display applications. Althoughproducts incorporating a-IGZO TFT backplanes are already commercially available,e.g., iMac with 5K retina display, technical challenges need to be addressed for nextgenerationapplications, e.g., active-matrix organic light-emitting diode displays.Device stability is one crucial issue. The...
    Resource Type:
    Dissertation
    Full Text:
    Transistors Abstract approved: ______________________________________________________ John F

  • Thermally-stable amorphous metal thin films

    Creator:
    McGlone, John M.
    Abstract:
    Amorphous metal thin films (AMTFs) are of potential use for metal-insulator-metal (MIM) tunnel diode applications due to their ultra-smooth surfaces, a consequence of their amorphous microstructure. The objective of this thesis is to design a thermally-stable AMTF capable of maintaining MIM tunnel diode performance after a post-deposition anneal in excess...
    Resource Type:
    Masters Thesis
    Full Text:
    : Thermally-Stable Amorphous Metal Thin Films. Abstract approved: John F. Wager Amorphous metal thin films

  • Development of Amorphous Metal Thin Films for Thermal Inkjet Printing and Microelectronics

    Creator:
    McGlone, John M.
    Abstract:
    Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...
    Resource Type:
    Dissertation
    Full Text:
    . Abstract approved: John F. Wager Due to a lack of grain boundaries, an amorphous metal thin film (AMTF

  • Development of Cu-based Thin Films for Optoelectronic Applications

    Creator:
    Angelos, Gregory S.
    Abstract:
    CIGS and CdTe based commercial thin-film solar cells (TFSCs) require an absorber thickness greater than 2 µm and 4 µm, respectively, to adequately absorb the solar spectrum. To efficiently extract photoexcited electrons, these TFSCs require relatively defect-free absorbers with high-minority carrier mobility (> 100 cm2V−1s−1) and long lifetime (> 10...
    Resource Type:
    Dissertation
    Full Text:
    -based Thin Films for Optoelectronic Applications Abstract approved: John F. Wager CIGS and CdTe based