This thesis focuses on two aspects of transparent electronics, SnO₂ transparent thin-film transistors (TTFTs) and transparent circuits. Both depletion- and enhancement-mode SnO₂ TTFTs are realized. The maximum effective mobility for the depletion- and enhancement-mode devices are 2 cm²V⁻¹s⁻¹ and 0.8 cm²V⁻¹s⁻¹, respectively. A variety of techniques to decrease the carrier...
Current leading thin-film solar cell technologies, i.e., cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS), employ elements which are either toxic (Cd), or rare and/or expensive (In, Te, Ga, and Cd). The aim of this thesis is to investigate new, abundant, non-toxic p-type semiconductors for potential solar absorber application....
A discrete trap model is developed and employed for elucidation of thin-film transistor (TFT) device physics trends. An attractive feature of this model is that only two model parameters are required, the trap energy depth, E[subscript T], and the trap density, N[subscript T]. The most relevant trends occur when E[subscript...
The research presented herein focuses on electrical assessment of oxide thin films as insulators. The current density-electric field (J-E) characteristics of four insulators of dramatically different electrical quality are assessed in terms of their operative electronic conduction mechanisms. Conduction in the two high-quality insulators is dominated by Ohmic conduction and...
The focus of this thesis is the investigation of thin-film transistors (TFTs) based on amorphous oxide semiconductors (AOSs) in two circuit applications. To date, circuits implemented with AOS-based TFTs have been primarily enhancement-enhancement inverters, ring oscillators based on these inverters operating at peak frequencies up to ~400 kHz, and two-transistor...
The atomic solid state energy (SSE) scale is introduced as a tool for inorganic materials design. The SSE scale is obtained by assessing an average electron affinity (EA) (for a cation) or an average ionization potential (IP) (for an anion) for each atom using data from compounds having that specific...
A class of inorganic thin-film transistor (TFT) semiconductor materials has emerged involving oxides composed of post-transitional cations with (n-1)d¹⁰ns⁰ (n≥4) electronic configurations. This thesis is devoted to the pursuit of topics involving the development of these materials for TFT applications: Deposition of zinc oxide and zinc tin oxide semiconductor
layers...
Amorphous metal thin films (AMTFs) are of potential use for metal-insulator-metal (MIM) tunnel diode applications due to their ultra-smooth surfaces, a consequence of their amorphous microstructure. The objective of this thesis is to design a thermally-stable AMTF capable of maintaining MIM tunnel diode performance after a post-deposition anneal in excess...
Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...