The objective of the research presented in this thesis is to develop, implement, and demonstrate the utility of an n-sheet, state-space alternating-current thin-film electroluminescent (ACTFEL) device model. In this model, the phosphor layer is discretized into n + 1 layers, with band-to-band impact ionization, space charge creation/ annihilation, and luminescent...
Amorphous metal thin films (AMTFs) are of potential use for metal-insulator-metal (MIM) tunnel diode applications due to their ultra-smooth surfaces, a consequence of their amorphous microstructure. The objective of this thesis is to design a thermally-stable AMTF capable of maintaining MIM tunnel diode performance after a post-deposition anneal in excess...
The long-term goal of the research project initiated with this thesis is the development of lead-free, fully-transparent ferroelectric devices, such as ferroelectric capacitors or ferroelectric-gate field-effect transistors. Ferroelectric materials exhibit spontaneous polarization with the application of an external electric field, which is persistent upon removal of the applied field, and...
The purpose of this thesis is to contribute to the understanding of SrS-based alternating-current thin-film electroluminescent (ACTFEL) device operation. Three main accomplishments serving this purpose are presented in this thesis. First, two new methods are developed for estimation of insulator capacitance in ACTFEL devices possessing a large amount of dynamic...
Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...
Amorphous oxide semiconductors (AOSs) are of great current interest for thin-film transistor (TFT) channel layer applications. In particular, indium gallium zinc oxide (IGZO) is under intense development for commercial applications because of its demonstrated high performance at low processing temperatures. The objective of the research presented in this thesis is...
White electroluminescence (EL) was observed for the
first time from diamond-like carbon (DLC) films at room
temperature. Electroluminescence was observed by the
application of ac voltages in excess of 200 V to a metal-insulator-
semiconductor (i.e. DLC)-insulator-metal (MISIM)
device structure.
For EL applications, three types of the DLC films were...
The main achievement of this thesis is the development of a two-sheet charge simulation model with space charge creation by trap-to-band impact ionization to describe the electrical characteristics of alternating-current thin-film electroluminescent (ACTFEL) devices. The two-sheet charge model localizes all of the space charge in the phosphor region of an...