The effects of round, square, and reentrant entrances on flow
regimes and local heat transfer coefficients were determined using a symmetrical,
plane-wall two-dimensional, subsonic air diffuser with one
of the diverging walls heated and maintained isothermal.
Flow and heat transfer studies were made at total divergence
angles ranging from 0...
The free convective heat transfer phenomena in air between two
vertical plates 24 by 38 inches spaced 15.895 mm apart, was investigated in this experimental study. One plate was isothermal and, the
other adiabatic.
A quartz fiber anomometer was used for measuring local
velocities in the air between the vertical...
The heat-transfer phenomena studied in this work were
associated with pool boiling from a flat horizontal surface facing
upward with the bulk liquid at its saturation temperature. The
analysis of boiling sound and the investigation of the transition boiling
mechanism constituted the essence of the present study.
The distinctively large...
Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
Southern pine and Douglas fir veneer samples were dried in air
under the following conditions: air temperatures were 350, 600, and
750°F; air velocities were 50, 100, and 150 feet per second, and
angles of impingement of air against the veneer surfaces were 0°,
45°, and 90°. The resulting drying...
Natural convection heat transfer in air between two vertical
plates 38 by 24 inches was investigated in this work with spacings
between the plates of 0.625, 1.0 and 1.75 inches. One plate was isothermal
and the other adiabatic.
To measure the point velocities in the air layer a very thin...
A cold trap is a device used to remove certain impurities from
a liquid metal by controlled precipitation of such impurities.
An investigation of the thermal characteristics of laminar flow
in two air-cooled cold traps was made. This investigation showed
that the sodium heat transfer rate is a function of...
Concern about noise pollution has swept the country.
People are conscious of their environment and are trying to
preserve or to improve it. When the City of Lake Oswego
selected a site for their water treatment plant, they had
to assure the neighbors that it would not increase the
ambient...
This thesis is concerned with the analysis of heat transfer in a tube with forced flow under conditions of an arbitrary variation of wall heat flux both axially and circumferentially. This total study is separated into two distinct problems which are presented separately. The first is the case of a...
An experimental investigation was conducted for natural convection
heat transfer in an array of uniformly heated vertical cylinders
in mercury. The test section consisted of seven electrically heated
cylinders of 1.365 inch diameter and 3.825 inch heated length
arranged in an equilateral triangular pattern. In order to preclude
side flow...
A study was conducted to determine the heat transfer characteristics
of pin finned heat sinks in natural convection. Three pin
diameters were studied: 0.238 cm, 0.318 cm and 0.396 cm. The pins
were attached to the base in two arrangements, triangular and
rectangular, forming a horizontal array. Pin spacing was...
A steady gas convection model of heat transfer to a horizontal
cylinder immersed in a gas fluidized bed is presented. Contributions due to flow within
attached bubbles as well as the interstitial voids are
included. The interstitial flow is approximated as flow within a series
of double cusped channels and...
The volumetric receiver is an advanced solar central receiver
concept designed to produce high temperature air. This document
presents the results of a heat transfer and performance evaluation of
the volumetric receiver concept.
The volumetric receiver consists of an array of ceramic fins or
fibers arranged in concentric rows around...