Natural convection heat transfer in air between two vertical
plates 38 by 24 inches was investigated in this work with spacings
between the plates of 0.625, 1.0 and 1.75 inches. One plate was isothermal
and the other adiabatic.
To measure the point velocities in the air layer a very thin...
Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
The effects of round, square, and reentrant entrances on flow
regimes and local heat transfer coefficients were determined using a symmetrical,
plane-wall two-dimensional, subsonic air diffuser with one
of the diverging walls heated and maintained isothermal.
Flow and heat transfer studies were made at total divergence
angles ranging from 0...
Heat transfer characteristics and associated temperature and flow fields for natural convection in two-dimensional, square, partitioned and non-partitioned enclosures have been determined for Grashof numbers ranging from 10³ to 10⁶. The vertical side walls of the enclosure are isothermal with all other surfaces assumed to be adiabatic. An adiabatic partition...
Heat transfer and fluid mechanical behavior of water
flowing horizontally in vertically-narrow rectangular
channels was studied in this work. Friction factor and
Nusselt number variations were determined experimentally
for four different wall heating conditions, and for aspect
ratios(height to width) of 5, 4, 3, 2, and 1. Wall
heating conditions...
A cold trap is a device used to remove certain impurities from
a liquid metal by controlled precipitation of such impurities.
An investigation of the thermal characteristics of laminar flow
in two air-cooled cold traps was made. This investigation showed
that the sodium heat transfer rate is a function of...
A study was conducted to determine the heat transfer characteristics
of pin finned heat sinks in natural convection. Three pin
diameters were studied: 0.238 cm, 0.318 cm and 0.396 cm. The pins
were attached to the base in two arrangements, triangular and
rectangular, forming a horizontal array. Pin spacing was...