The free convective heat transfer phenomena in air between two
vertical plates 24 by 38 inches spaced 15.895 mm apart, was investigated in this experimental study. One plate was isothermal and, the
other adiabatic.
A quartz fiber anomometer was used for measuring local
velocities in the air between the vertical...
Natural convection heat transfer in air between two vertical
plates 38 by 24 inches was investigated in this work with spacings
between the plates of 0.625, 1.0 and 1.75 inches. One plate was isothermal
and the other adiabatic.
To measure the point velocities in the air layer a very thin...
A theoretical study of the heat and momentum transfer resulting
from a flow of power plant condenser effluent discharged vertically to
shallow, quiescent coastal receiving water is presented. The complete
partial differential equations governing steady, incompressible, turbulent
flow driven by both initial momentum and buoyancy are solved
using finite-difference techniques...
This thesis examines the transient and steady-state temperature performance
of a rotary regenerative heat exchanger. In contrast to previous
studies on this problem, fluid flow in the circumferential direction was
considered. Appropriate modeling was included to measure the effect of
carry-over on the differential equations describing mass and energy
conservation....
A study was conducted to determine the heat transfer characteristics
of pin finned heat sinks in natural convection. Three pin
diameters were studied: 0.238 cm, 0.318 cm and 0.396 cm. The pins
were attached to the base in two arrangements, triangular and
rectangular, forming a horizontal array. Pin spacing was...
An experimental investigation was conducted to determine
characteristics of natural convection of mercury in a vertical channel,
which was open at both ends. Two cases were investigated separately:
1) both walls uniformly and symmetrically heated, and 2) one wall
heated with the other insulated.
Heat transfer correlations in laminar flow...