As microelectronic parts trend smaller so do their solder joints. The surface finish on a copper pad is expected to become a significant part of the total solder joint volume and therefore affect mechanical properties of the smaller solder joints. Two sample geometries and four different surface finishes for tin-silver-copper...
Time-dependent crack growth mechanisms in Alloy 617 at 800°C in air were studied using compact tension samples machined in the L-T direction, cracked at temperature using an induction furnace and servo-hydraulic load frame. The application of different loading waveforms, including triangular, hold time, and sustained loading, were studied with relation...
Treatment of extrahepatic portosystemic shunts provides many options, including cellophane banding. These cellophane bands are secured with a ligation clip. Weck® offers two forms of these: the stainless steel Hemoclip, and the polymer Hem-o-lok. This in vitro study compares the mechanical strength of these two of types of clips by...
Bulk metallic glasses (BMGs) are relatively new amorphous materials that have received much attention in recent years. Rapid cooling methods from the liquid state provides the possibility to bypass crystallization during solidification. Due to the lack of crystal defects such as grain boundaries and dislocations, BMGs can have some special...
Bulk metallic glasses (BMGs) offer a great deal of potential through their near-theoretical strength, potentially high toughness and unique forming and molding traits. However, there are still a number of outstanding issues that bar their widespread use. This thesis describes the investigation of three research questions each designed to further...
Because of its attractive material properties like high hardness, high toughness, and excellent high temperature strength, materials like silicon nitride are becoming more common for use in high performance applications. However, there have been limited studies of the fatigue behavior of small cracks in silicon nitride and other materials toughened...
Thermoelectric materials are playing an increasingly significant role in the global effort to develop sustainable energy technologies. Consequently, the demand for materials with greater thermoelectric efficiency has stimulated the development of state-of-the-art interstitially doped skutterudite-based materials. However, since intermetallics are often embrittled by interstitial substitution, optimal skutterudite-based device design, manufacture,...
Toughened ceramics, or bridging ceramics, are being developed in an attempt
to widen the application base of traditional ceramics, which are brittle and have low
resistance to crack extension. The crack growth resistance of these extrinsically
toughened ceramics has been shown to increase with crack length, and unlike
traditional ceramics,...
This work describes the fabrication of a high uranium density fuel for the
Reduced Enrichment of Research and Test Reactors Program. In an effort to decrease
the use of high enriched uranium in research and test reactors around the world, new
fuels with high uranium densities must be developed such...
The effect of ambient environment on the fatigue behavior of two Zr-Ti-Cu-Ni-Be bulk metallic glasses (BMGs) is examined in the present study. The first metallic glass, Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅, was tested to establish the presence of an environmental effect in the fatigue growth curve measured in ambient air. Fatigue growth curves produced...