Index Catalog // ScholarsArchive@OSU

Creator:: MacNeill, William D.
Abstract:: Photonic sintering of nanoparticles is a relatively new process for sintering of nanoparticles, deposited on a substrate, into functional solid structures. The working principle of this process is the incidence of large-area broad-spectrum light onto deposited nanoparticles, which results in heat generation in the nanoparticles and their subsequent densification. Key...
Resource Type:: Masters Thesis

Creator:: Mirkoohi, Elham
Abstract:: Sintering of nanoparticles to create films and patterns of functional materials is emerging as a key manufacturing process in applications like flexible electronics, solar cells and thin-film devices. Further, there is the emerging potential to use nanoparticle sintering to perform additive manufacturing as well. While the effect of nanoparticle size...
Resource Type:: Masters Thesis

Creator:: Bansal, Shalu
Abstract:: In Intense Pulsed Light (IPL) sintering, pulsed large-area visible light from a xenon lamp is absorbed by nanoparticle films or patterns and converted to heat, resulting in rapid sintering of the nanoparticles. This work experimentally characterizes IPL sintering of silver nanoparticle films. A newly observed turning point in the evolution...
Resource Type:: Masters Thesis

Creator:: Pratte, William
Abstract:: Diffusion bonded microchannels provide significant benefits by reducing space requirements while improving thermal efficiency when used in heat exchangers. In particular, these microchannels have potential to improve efficiencies for combining concentrated solar power with supercritical CO2 Brayton cycles, where structures operate at high temperatures (760 ˚C) and high pressures (25...
Resource Type:: Masters Thesis

Creator:: Bhandari, Roshan
Abstract:: Microscale continuous thin films or patterned conductive structures find applications in thin film electronics, energy generation and functional sensor systems. An emerging alternative to conventional vacuum based deposition of such structures is the additive deposition and sintering of conductive nanoparticles, to enable low temperature, low- cost and low energy fabrication....
Resource Type:: Masters Thesis

ScholarsArchive@OSU