Search Constraints

Start Over
Filtering by: Contributor Fowler, John E. Remove constraint Contributor: Fowler, John E. Contributor advisor sim Wager, John F. Remove constraint Contributor advisor sim: Wager, John F.

Search Results

  • Amorphous metal thin films as a platform for solution processing

    Creator:
    Landau, Nicholas P.
    Abstract:
    The research presented herein represents an effort to combine the ultra-smooth surface of an amorphous metal thin film (AMTF) with a solution-processed dielectric synthesized via prompt inorganic condensation (PIC). Analysis of dielectric film quality is carried out via electrical measurements of metal-insulator-metal (MIM) diodes. Anneals at 500 and 700 °C...
    Resource Type:
    Masters Thesis
    Full Text:
    current density versus electric field (log J-ξ), (c)(d) Poole-Frenkel linearization, and (e)(f) Fowler

  • Electronic Conduction Mechanisms in Insulators

    Creator:
    Chiang, Tsung-Han
    Abstract:
    The research presented herein focuses on electrical assessment of oxide thin films as insulators. The current density-electric field (J-E) characteristics of four insulators of dramatically different electrical quality are assessed in terms of their operative electronic conduction mechanisms. Conduction in the two high-quality insulators is dominated by Ohmic conduction and...
    Resource Type:
    Dissertation
    Full Text:
    parameters, m∗e and qφB. Figure 2.13 22 shows simulated J−ξ curves for Fowler-Nordheim tunneling when

  • Thermally-stable amorphous metal thin films

    Creator:
    McGlone, John M.
    Abstract:
    Amorphous metal thin films (AMTFs) are of potential use for metal-insulator-metal (MIM) tunnel diode applications due to their ultra-smooth surfaces, a consequence of their amorphous microstructure. The objective of this thesis is to design a thermally-stable AMTF capable of maintaining MIM tunnel diode performance after a post-deposition anneal in excess...
    Resource Type:
    Masters Thesis
    Full Text:
    curves are shown in (c). (e) Parameters used for Fowler-Nordheim simulations in (a) to (d) obtained from

  • SPICE modeling of ACTFEL devices and OLEDs

    Creator:
    Bender, Jeffrey P.
    Abstract:
    The achievements of this thesis are the development of several models for the SPICE (Simulation Program with Integrated Circuit Emphasis) simulation of alternating-current thin-film electroluminescent (ACTFEL) devices, organic light-emitting devices (OLEDs), and polymer light-emitting devices (PLEDs). First, an ACTFEL model based on the built-in HSPICE Fowler-Nordheim tunneling diode is developed,...
    Resource Type:
    Masters Thesis
    Full Text:
    : John The achievements of this thesis are the development of several models for the SPICE (Simulation

  • Transparent electronics : thin-film transistors and integrated circuits

    Creator:
    Presley, Rick E.
    Abstract:
    This thesis focuses on two aspects of transparent electronics, SnO₂ transparent thin-film transistors (TTFTs) and transparent circuits. Both depletion- and enhancement-mode SnO₂ TTFTs are realized. The maximum effective mobility for the depletion- and enhancement-mode devices are 2 cm²V⁻¹s⁻¹ and 0.8 cm²V⁻¹s⁻¹, respectively. A variety of techniques to decrease the carrier...
    Resource Type:
    Masters Thesis
    Full Text:
    thesis.dvi AN ABSTRACT OF THE THESIS OF Rick E. Presley for the degree

  • Physical vapor deposition of novel thin-film solar absorbers

    Creator:
    Waters, Benjamin E.
    Abstract:
    Current leading thin-film solar cell technologies, i.e., cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS), employ elements which are either toxic (Cd), or rare and/or expensive (In, Te, Ga, and Cd). The aim of this thesis is to investigate new, abundant, non-toxic p-type semiconductors for potential solar absorber application....
    Resource Type:
    Masters Thesis
    Full Text:
    AN ABSTRACT OF THE THESIS OF Benjamin E. Waters for the

  • Development of Amorphous Metal Thin Films for Thermal Inkjet Printing and Microelectronics

    Creator:
    McGlone, John M.
    Abstract:
    Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...
    Resource Type:
    Dissertation
    Full Text:
    AN ABSTRACT OF THE DISSERTATION OF John M. McGlone for the

  • Hot carrier degradation of sub-micron n-channel MOSFETs subject to static stress

    Creator:
    Aminzadeh, Payman G.
    Abstract:
    Hot carrier effects in sub-micron lightly doped drain (LDD) n-channel MOSFETs under static (DC) stress are studied in order to establish the degradation mechanisms of such devices. Degradation is monitored as a function of time at various gate voltages. Under accelerated aging conditions (i.e. large drain voltages) the gate voltage...
    Resource Type:
    Masters Thesis
    Full Text:
    Degradation Of Sub-Micron n-channel MOSFETs Subiect to Static Stress. Abstract approved: Dr. John F. Wager

  • ACTFEL device simulation with impact ionization using a two-sheet charge model

    Creator:
    Bouchard, Anthony F.
    Abstract:
    The main achievement of this thesis is the development of a two-sheet charge simulation model with space charge creation by trap-to-band impact ionization to describe the electrical characteristics of alternating-current thin-film electroluminescent (ACTFEL) devices. The two-sheet charge model localizes all of the space charge in the phosphor region of an...
    Resource Type:
    Masters Thesis
    Full Text:
    F. Bouchard, Author Redacted for Privacy ACKNOWLEDGMENT I would like to thank Dr. John Wager

  • Instability and temperature-dependence assessment of IGZO TFTs

    Creator:
    Hoshino, Ken
    Abstract:
    Amorphous oxide semiconductors (AOSs) are of great current interest for thin-film transistor (TFT) channel layer applications. In particular, indium gallium zinc oxide (IGZO) is under intense development for commercial applications because of its demonstrated high performance at low processing temperatures. The objective of the research presented in this thesis is...
    Resource Type:
    Masters Thesis
    Full Text:
    Assessment of IGZO TFTs. Abstract approved: _____________________________________________________ John