Index Catalog // ScholarsArchive@OSU

Creator:: Covey, David J.
Abstract:: CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...
Resource Type:: Masters Thesis

Creator:: Walker, Andrew J.
Abstract:: The collapse of the I-35W Bridge in Minneapolis, MN in 2007 prompted an investigation into the design and inspection of the steel truss bridges. Further investigation into the collapse revealed that a gusset plate experienced sway buckling, causing the bridge failure. This bridge failure motivated research into the analysis and...
Resource Type:: Masters Thesis
Full Text:: equations are conservative, but not necessarily accurate. Examining the mechanical properties of gusset

Creator:: Chen, Jiaming
Abstract:: Most specifications for ready-mix concrete (RMC) limit mixing time to 90 minutes and/or truck drum revolution counts (DRC) to 300 before discharge. These specifications have been in place for many years with the objective of ensuring the quality and performance of the finished concrete product. However, limited research has been...
Resource Type:: Masters Thesis
Full Text:: research indicate that mixing time and truck DRC have no detrimental effects on the mechanical properties

Creator:: Panduranga Setty, Shreyas
Abstract:: Concrete is the most widely used construction material in the world. When constructing large concrete structures, concrete may have to be placed in multiple lifts. In these cases, fresh concrete is placed on hardened concrete. The interface that is formed between these two lifts of concrete is known as a...
Resource Type:: Masters Thesis
Full Text:: concrete established by a combination of mechanical interlocking of the particles; and iii) dowel action

ScholarsArchive@OSU