Index Catalog // ScholarsArchive@OSU

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Creator:: Yan, Dongqing
Abstract:: A nickel-based Hastelloy C22 powder with a nominal composition of Ni-21.30Cr-13.36Mo-1.92Co-2.94W-3.85Fe-0.23Mn-0.3V(wt%) and particle size distribution of D₁₀=23.8±0.3 μm, D₅₀=37.5±0.2μm, and D₉₀=59.3±1.1 μm was gas atomized to be used as a feedstock in Laser Powder Bed Fusion (LPBF). In this study, laser power and scanning speed were optimized to manufacture specimens...
Resource Type:: Masters Thesis
Full Text:: fusion of inconel 625 nickel-based alloy, Appl. Sci. 10 (2020). https://doi.org/10.3390/app10010081

Applications of Magnetic Materials in Soft Robotics

Creator:: Davis, William M.
Abstract:: Magnetic materials can be used in modern soft robotics as a method for external stimulus actuation and motion control. By combining aspects of biology and mechanics, devices are fabricated to create a structure capable of complex movement. Applications that these devices are subject to can be broken down into four...
Resource Type:: Capstone Project
Full Text:: ,” Actuators, vol. 7, no. 4, p. 76, Oct. 2018, doi: https://doi.org/10.3390/act7040076 [7] J.-Y. Lee and K

Development of Rapid Diagnostic Tools for Personal Health Monitors in the Context of Therapy Monitoring

Creator:: Wentland, Lael T.
Abstract:: Personal health monitoring tools, a subset of point-of care-diagnostics, enable more frequent testing of chronic health conditions outside of a clinic setting and can inform personalized therapy or support telehealth diagnostic capabilities. While there is evidence that regular monitoring of chronic conditions can lead to better health outcomes and lower...
Resource Type:: Dissertation

Signal Enhancement in Lateral Flow Tests for Infant HIV Diagnosis

Creator:: Rodriguez, Michael A.
Abstract:: Paper-based assays for HIV diagnosis are cheap, portable, and require little to no skilled training, electricity, or expensive equipment to perform successfully. However, there is a need for tests with lower limits of detection (LOD) for diagnosing infection at the earliest stages. Effective labeling to increase signal-to-noise ratio is critical...
Resource Type:: Masters Thesis

Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition

Creator:: Merrill, Scott
Abstract:: Advances in additive manufacturing technologies allow for the rapid, inexpensive manufacturing of microwave circuits. Circuits made using additive manufacturing are comparable in performance to circuits produced circuits produced using conventional methods such as printed circuit board fabrication, thin film deposition, machining, and milling. Very little work has been done in...
Resource Type:: Masters Thesis

Wireless Microwave Sensing in Environmental and Biomedical Applications

Creator:: Uluer, Ismail Hakki
Abstract:: This dissertation studies two different wireless microwave sensing applications in the subjects of environmental monitoring and biomedical devices. The environmental sensing application presents a design of novel wireless sensor node configurations. These nodes are intended to be used specifically in a built environment of railroad track ballast for its health...
Resource Type:: Dissertation

Phenotyping Degeneration of the Intervertebral Disc with Principal Component Analysis and K-Means Clustering

Creator:: Chen, Joseph
Abstract:: The human intervertebral disc (IVD) provides support for the vertebral bodies, allowing for movement and load bearing. The IVD can degenerate with age or injury, impeding function and causing chronic pain. Despite disc degeneration affecting over 90% of adults over age 50, and back pain being the leading global cause...
Resource Type:: Masters Thesis

The Influence of Fuel Characteristics on Smoldering Behavior through Porous Fuels

Creator:: Ross, Andrew H.
Abstract:: Smoldering can play a dangerous role in the ignition and spread of wildfires. Naturally occurring fuels consist of multiple layers of organic materials with varying particle sizes due to differences in decomposition stages with fuel depth, yet the influence of particle size on burning behavior is poorly understood. Previous research...
Resource Type:: Masters Thesis

Development of Microfluidic Assays and Flow Control Tools on Porous Materials: Towards a Wound-Health Monitoring Device

Creator:: Downs, Corey J.
Abstract:: Remote health monitoring tools have significant potential to revolutionize the current healthcare paradigm. Such tools could improve efficiencies in healthcare by alerting patients and doctors to abnormal health conditions in real time, shortening the time to diagnose and treat ailments. To meet these needs, we pursue the development of fabric-based...
Resource Type:: Dissertation
Full Text:: . https://doi.org/10.3390/s17122952. [14] M.W. Löffler, H. Schuster, S. Bühler, S. Beckert, Wound fluid

Analysis of the Effects of Combustion Products on Forced Ignition and Turbulent Flame Propagation

Creator:: Bonebrake, Jonathan M.
Abstract:: Practical combustion devices frequently rely upon forced ignition of turbulent fuel/oxidizer mixtures that also contain the product species of combustion. Examples of this include engines that use exhaust gas recirculation (EGR), inter-turbine burners in aircraft engines, and other systems the utilize staged combustion. In this work, the effects of major...
Resource Type:: Dissertation

ScholarsArchive@OSU

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Applications of Magnetic Materials in Soft Robotics

Development of Rapid Diagnostic Tools for Personal Health Monitors in the Context of Therapy Monitoring

Signal Enhancement in Lateral Flow Tests for Infant HIV Diagnosis

Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition

Wireless Microwave Sensing in Environmental and Biomedical Applications

Phenotyping Degeneration of the Intervertebral Disc with Principal Component Analysis and K-Means Clustering

The Influence of Fuel Characteristics on Smoldering Behavior through Porous Fuels

Development of Microfluidic Assays and Flow Control Tools on Porous Materials: Towards a Wound-Health Monitoring Device

Analysis of the Effects of Combustion Products on Forced Ignition and Turbulent Flame Propagation

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search