This thesis presents an effective control design methodology using a one-step-ahead prediction adaptive control law and an adaptive control law based on a Lyapunov function. These control law were applied to a highly maneuverable high performance aircraft, in particular, a modified F/A-18. An adaptive controller is developed to maneuver an...
A significant barrier to the diffusion bonding of large (i.e. 600 mm) microchannel devices is the large capital investment required to setup production. This large capital investment extends from long heating and cooling cycles leading to poor production
capacities. Empirical studies in industry have shown that cooling rate is limited...
Business and recreation in the modern day world often include air travel as their
cornerstone. Travelers who are disabled and wheelchair bound have to undergo a
transfer process to board and deplane a commercial aircraft. This transfer process is
typically done manually, with agents physically lifting the passenger who is...
:
_________________________________________________________
Joseph R. Zaworski
Business and recreation in the modern day world often include air travel
The ability of the resin to deform plastically can be an
important factor when considering the mechanical properties of particleboard.
Between resin droplets there exists an unbonded region
that forms the surface for a crack. When particleboard is deformed
stress concentrations develop at the crack tips in the voids. A...
The main source of the time-dependent behavior of fiber-reinforced composites is their polymeric matrix, which causes concerns about their long term durability. Although for composites where organic fibers such as Graphite are used, the fibers are also a contributing factor. A composite material may exhibit an appreciable amount of creep,...
The validity of the widely used stochastic linearization
method for analysing the response of guyed towers to stochastic loads
is investigated. The governing equations of a guyed tower have two
main sources of nonlinearities, fluid-structure interaction and the
restoring force of the cables. In this study, two models are
considered....
Heat transfer characteristics and associated temperature and flow fields for natural convection in two-dimensional, square, partitioned and non-partitioned enclosures have been determined for Grashof numbers ranging from 10³ to 10⁶. The vertical side walls of the enclosure are isothermal with all other surfaces assumed to be adiabatic. An adiabatic partition...
Pure aluminum deformed in torsion (shear) at elevated temperatures reaches
a broad "peak" stress and then undergoes about a 17% decrease in flow stress with
deformation to roughly 1-2 equivalent uniaxial strain. Beyond this strain the flow
stress is approximately constant. The sources for this softening are unclear. The
suggested...
A large part of low-back pain occurrences are due to disc herniation or prolapse of the nucleus pulposus. An alternative technique to existing treatments of low back pain includes nucleus pulposus replacement by an artificial material to relieve pain and restore normal function. To date, there has been a deficiency...
This dissertation investigates by means of computer simulation the potential of a
Band Variable-Inertia Flywheel (BVIF) to store energy for an urban transit bus.
Replacing both a fixed-inertia flywheel (FIF) and a continuously variable transmission
(CVT), the Band Variable-Inertia Flywheel is capable of accelerating a vehicle
from rest to a...