Index Catalog // ScholarsArchive@OSU

Creator:: Keller, Philipp
Abstract:: The Astoria-Megler Bridge is a 6.6 kilometer (4.1 mile) long bridge, connecting Oregon and Washington on US 101, with a continuous steel truss main span of 376 m (1232 ft). It is the second longest main span bridge of this type in the world. Due to vortex shedding, some of...
Resource Type:: Masters Thesis
Full Text:: , Dr. Thomas Miller, Dr. Michael Scott and Dr. Andrew Meigs, for their thoughtful questions, comments

Creator:: Stark, Duncan
Abstract:: Ponding of water on roof systems leading to collapse causes expensive damage and jeopardizes the life safety of building occupants. Current building codes and design specifications for flat roof systems offer minimal guidance in designing for ponding loads. The present research investigated ponding load effects on a long span, lightweight...
Resource Type:: Masters Thesis
Full Text:: . Thanks also to Dr. Miller and Dr. Scott for their help with the project, and to all the professors I

Creator:: Nguyen, Quang D.
Abstract:: A methodology was developed to permit rectification and metrification of digital images of steel truss gusset plate connections. The approach will enable rapid and accurate collection of field measurements as compared to traditional methods to enable structural evaluation of gusset plate connections. The program enables the operator to quickly create...
Resource Type:: Masters Thesis

Creator:: Mitchell, Mikal Maxwell
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Resource Type:: Masters Thesis

Creator:: Dawson, Matthew Ryan
Abstract:: Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
Resource Type:: Masters Thesis

Creator:: Smith, Matthew T. (Matthew Todd)
Abstract:: Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders. Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Resource Type:: Masters Thesis

Creator:: Carlton, Adam K.
Abstract:: In recent years confinement requirements for concrete columns have increased in seismic regions. Steel jackets are one way to confine reinforced concrete columns. The increased confinement provides additional strength and ductility for the columns during seismic events. For reinforced concrete columns with steel jackets, there are different section properties in...
Resource Type:: Masters Thesis

Creator:: Bultena, Sarah M.
Abstract:: Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Resource Type:: Masters Thesis

ScholarsArchive@OSU