Since the collapse of World Trade Center building number seven (WTC7), significant research has been done to understand the behavior of steel structures in fire and enable engineers to account for the behavior of steel framing systems exposed to fire during design. Despite these efforts, there are still significant barriers...
Pile caps are structural elements used to transfer loads from columns to a group of piles, which transfer them to stronger soil layers. Pile cap with horizontal distance between the column and piles less than twice its effective depth is categorized as "deep," where significant nonlinear strain distribution occurs through...
While real-time hybrid simulation has been utilized for structures subjected to seismic events for decades, its use in fluid-structure interaction problems is still a novel endeavor. Gathering data for cascading seismic and tsunami events is difficult due to space constraints in existing experimental facilities, complications regarding the application of scaling...
Fluid-structure interaction (FSI) has been of significant research interest worldwide over the past several decades because of its variety of applications in both offshore and coastal engineering. Researchers analyzing FSI systems rely heavily on experimental tests in model scale in laboratories or large-scale sea trials. However, these tests are often...
This dissertation studies the development of the design procedures for Steel Slit Panel Frame (SSPF). The (SSPF) system is a seismic force-resisting system (SFRS) with ductile behavior and good energy dissipation up to 5\% to 7\% lateral drift that acting as seismic fuses. The current design guidelines provided valuable information...
Coastal multi-hazards, i.e., earthquakes followed by tsunamis, induce severe damage to coastal infrastructure. The multi-hazards can cause soil liquefaction, which is one of the major concerns for evaluating sediments transport potential and structure failure mechanisms. The objectives for this work is threefold. First, to build and validate a soil numerical...
The constitutive behavior of high-performance fiber-reinforced cementitious composites (HPFRCCs) under mechanical loading is characterized by significant tensile properties that play an essential role in the structural response of several applications in structural engineering. The significance of tensile properties of HPFRCCs in structural engineering is the focus of three manuscripts presented...
Cross-laminated timber (CLT) is an attractive building material because it is renewable, promotes fast installation, and possesses a high strength-to-weight ratio. The use of CLT in seismic applications has become increasingly common with the development of post-tensioned CLT rocking wall lateral force resisting systems (LFRS). The CLT pier-and-spandrel system designed,...
Connections in mass timber structural systems dissipate energy and transfer lateral forces from mass timber elements such as shear walls and diaphragms, providing critical load paths. Cross-laminated timber (CLT) is a prominent mass timber material used to manufacture wall and floor assemblies. Fire performance research of CLT walls and floors...
For mid-rise and high rise buildings, slender reinforced concrete (RC) structural walls are commonly used as the main structural elements to resist lateral applied loads in high seismically areas around the globe. These RC structural walls can provide substantial deformation capacity, stiffness, and lateral strength through the contribution of their...
Catastrophic earthquake and tsunami events that resulted in significant loss of life and property over the past two decades have raised the global awareness regarding the need to understand the response of communities and their built environment to multi-hazard extreme events. In recognition to this impending threat to the coastal...
The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
During the 2011 Great East Japan Earthquake and Tsunami, numerous bridge structures were damage or destroyed. The damage to bridge systems was caused by long duration strong ground shaking, tsunami inundation forces, or both. Long duration strong ground shaking from subduction zone earthquakes and the multi-hazard scenario of combined earthquake...
Discrete columns, such as stone and soil-cement columns, are often used to improve the liquefaction resistance of loose sandy ground. In particular, stone columns are considered to increase resistance potential by densification, drainage, and reinforcement mechanisms. For silty soil, the shear stress reduction resulting from the reinforcing effect of stiffer...
This dissertation examines tsunami and hurricane wave loads on bridge superstructures. Tsunamis have caused significant damage to coastal communities in recent years. For example, the 2011 Great East Japan Earthquake and resulting Tohoku Tsunami destroyed infrastructure along the east coast of Japan including bridge superstructures. Recent hurricanes have also caused...
The steel diagrid structural system is a recent load bearing and lateral resisting structural system for tall building structures that is relatively unexplored in the western United States. One possible reason for the little use of diagrid systems in earthquake prone regions is the lack of guidelines and application examples...
In this study, a coupled potential flow-viscous flow model is used for numerical wave tank simulation. The solver satisfies all the requirements for such a simulation environment. The coupling scheme is based on a non-overlapping heterogeneous domain decomposition method. In this method, the flow domain consists of two subdomains. In...
There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
Current bridge design codes do not account for the effects of duration of mega-thrust subduction zone earthquakes. Furthermore, codes and even recent performance-based design methodologies only make use of the peak response quantities (forces, displacements, and ductility demands) and do not account for the increased number of inelastic cycles that...
The response of adjacent structural systems to earthquake motions is investigated using the finite element framework OpenSees. Results of sensitivity analyses demonstrate that structural response quantities can increase in either or both of the adjacent structures for specific configurations. The structural models used include steel moment-resisting frames and rigid shear...