Search Constraints

Start Over
Filtering by: Creator Rakesh Gupta Remove constraint Creator: Rakesh Gupta Committee Member Sinha, Arijit Remove constraint Committee Member: Sinha, Arijit

Search Results

  • Evaluation of remediation techniques for circular holes in the webs of wood I-joists

    Creator:
    Polocoser, Tiberiu
    Abstract:
    The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: Rakesh Gupta Thomas H. Miller The objective of this project was

  • Behavior of Cross-Laminated Timber Diaphragm Panel-to-Panel Connections with Self-Tapping Screws

    Creator:
    Sullivan, Kyle
    Abstract:
    The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
    Resource Type:
    Masters Thesis
    Full Text:
    : _____________________________________________________________________ Thomas H. Miller Rakesh Gupta The goal of this project is to contribute to the

  • Tsunami loading on light-frame wood structures

    Creator:
    Linton, David B.
    Abstract:
    Since 2004 there have been multiple devastating tsunamis around the globe triggered by large magnitude earthquakes; with the most recent being the Tohoku, Japan tsunami in March 2011. These tsunamis have caused significant loss of life and damage to the coastal communities impacted by these powerful waves. The resulting devastation...
    Resource Type:
    Masters Thesis
    Full Text:
    , 2012. Title: Tsunami Loading on Light-Frame Wood Structures Abstract approved: Rakesh Gupta

  • Monotonic and Cyclic Testing of Cross-Laminated Timber Diaphragms

    Creator:
    Beairsto, Cody J.
    Abstract:
    Mass timber is emerging as a viable form of construction around the world in new markets for wood buildings. The entrance into these markets has driven the demand for more knowledge to enable designs alongside other structural materials such as steel and reinforced concrete. Large, in-plane tests on cross-laminated timber...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Rakesh Gupta Thomas H. Miller Abstract Mass timber is emerging as a viable form of

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Load Paths in a Realistic, Light-Frame Wood House  Abstract approved: Rakesh Gupta Thomas H

  • Examination of lateral stiffness and strength of pitched residential roof diaphragms with implications for seismic design.

    Creator:
    Kirkham, William J.
    Abstract:
    There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
    Resource Type:
    Dissertation
    Full Text:
    : _______________________________________________________________________ Rakesh Gupta Thomas H. Miller There are about 80 million single-family dwellings (SFD) in the

  • Use of Virtual Visual Sensors in the Determination of Natural Frequencies of Timber Structures for Structural Health Monitoring

    Creator:
    Walker, Kristopher
    Abstract:
    Many nondestructive techniques for structural health monitoring are subjective and based on visual observations of degradation. In addition, dynamic properties of structures are already used to obtain quantitative structural health data. However, most current data collection is limited to localized damage on the structure, rather than global response. Recent research...
    Resource Type:
    Masters Thesis
    Full Text:
    : ____________________________________________________________________________ Rakesh Gupta Thomas H. Miller Many nondestructive techniques for structural health

  • Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

    Creator:
    Larkin, Blake
    Abstract:
    Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America. CLT products must be certified for structural...
    Resource Type:
    Masters Thesis

  • The Fundamental Behavior of CLT Floor-to-Wall Connections in Fire

    Creator:
    Redus, James Aaron
    Abstract:
    This thesis focuses on the fundamental behavior of CLT floor-to-wall connections during a fire. Cross-laminated timber (CLT) panelized structures rely on floor-to-wall connections for the load path and stability of the structure. Additionally, the fire performance of these connections is critical to prevent horizontal or vertical fire spread within these...
    Resource Type:
    Masters Thesis
    Full Text:
    Rakesh Gupta co-authored chapter 3. Dr. Lech Muszyński assisted with the development of the method and