Index Catalog // ScholarsArchive@OSU

Creator:: Duncan, Sean M.
Abstract:: A physical model study was performed to examine the forces and response of 1:6 scale wood-frame coastal residential structures subjected to storm surge and waves. An on-grade and an elevated specimen were tested and exposed to regular waves with varying water depths and wave heights to simulate Hurricane Sandy’s conditions....
Resource Type:: Masters Thesis
Full Text:: = 1.10 m (star); h0 = 1.20 m (downward triangle); h0 = 1.30 m (upward triangle); h0 = 1.35 m (circle

Creator:: Shephard, Annabel B.
Abstract:: Timber-concrete composite (TCC) floors have improved strength and stiffness when compared to timber-only floors, allowing for longer spans in buildings and improved life safety. However, North America does not have codes and standards that recognize TCC floors, particularly the improved life safety performance of these floors in fire. Therefore, alternate...
Resource Type:: Masters Thesis
Full Text:: “unlimited” and 26 m (85 ft), respectively. Light-frame timber construction is designated as Type III and V

Creator:: Mugabo, Ignace
Abstract:: Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
Resource Type:: Dissertation
Full Text:: . 7 Objective 3: Structural element scale 1) Moisture cycling of a 2.13 m x 2.03 m 5-ply CLT

Creator:: Shrestha, Sharoo
Abstract:: There are many aging bridges in service in the US and around the world that were not constructed to modern seismic design codes and standards. As a result, they are expected to perform poorly during intense earthquake ground shaking. Older reinforced concrete (RC) bridges, in particular, are often supported on...
Resource Type:: Dissertation
Full Text:: 4.4 P-Delta Effects

Creator:: Loving, Carly K.
Abstract:: To ensure the safety of the nation’s bridges, the National Bridge Inspection Standards (NBIS) require all bridges to undergo routine load rating analyses to assess their structural capacity. Accurate geometric information for each structure is necessary for load rating analyses. This information is typically ascertained from as-built plans. Still, when...
Resource Type:: Masters Thesis
Full Text:: ...................................................................................................... 95 Figure 3-13. Typical (a) Shear and (b) Moment Diagrams for the Dead Loads (DC), units kN and m

Creator:: Khlef, Feras L.
Abstract:: The constitutive behavior of high-performance fiber-reinforced cementitious composites (HPFRCCs) under mechanical loading is characterized by significant tensile properties that play an essential role in the structural response of several applications in structural engineering. The significance of tensile properties of HPFRCCs in structural engineering is the focus of three manuscripts presented...
Resource Type:: Dissertation
Full Text:: K Fi gu re 1 -1 – T he re se ar ch w or k m et ho do lo gy 7 8 2

Creator:: Matus Casanova, Nicolas A.
Abstract:: The use of high strength steel reinforcement has the potential to provide economic and constructability benefits when used in reinforced concrete structures. However, more research is needed to justify and confidently allow its use. Current design provisions limit the nominal yield strength of reinforcing steel bars to 60 ksi (420...
Resource Type:: Masters Thesis

ScholarsArchive@OSU