This paper reviews the current progress in mathematical modeling of
anti-reflective subwavelength structures. Methods covered include effective medium
theory (EMT), finite-difference time-domain (FDTD), transfer matrix method (TMM), the
Fourier modal method (FMM)/rigorous coupled-wave analysis (RCWA) and the finite
element method (FEM). Time-based solutions to Maxwell’s equations, such as FDTD,
have...
Full Text:
the order of the wavelength and the height is
large in comparison to the wavelength. For our solar
Compared to conventional amorphous silicon (a-Si) TFTs, amorphous metal oxide TFTs have superior device performance such as
higher mobility, better sub-threshold swing, and lower off-state current. Amorphous metal oxide TFTs have an additional advantage
on the device uniformity due to the lack of grain boundary issues in the poly-Si TFTs....
Sintering of nanoparticle inks over large area-substrates is a key enabler for scalable fabrication of patterned and continuous films, with multiple emerging applications. The high speed and ambient condition operation of photonic sintering has elicited significant interest for this purpose. In this work, we experimentally characterize the temperature evolution and...
This paper reviews the current progress in mathematical modeling of
anti-reflective subwavelength structures. Methods covered include effective medium
theory (EMT), finite-difference time-domain (FDTD), transfer matrix method (TMM), the
Fourier modal method (FMM)/rigorous coupled-wave analysis (RCWA) and the finite
element method (FEM). Time-based solutions to Maxwell’s equations, such as FDTD,
have...
Full Text:
: vanwormk@onid.orst.edu;
Tel.: +1-503-312-1024; Fax: +1-541-737-4600.
Received: 3 January 2014; in
Oxide dispersion strengthened (ODS) alloys exhibit superior mechanical properties due to the presence of nano-sized thermally stable oxide particles. However, manufacturing of ODS alloys is very complex and composed of numerous time consuming steps such as mechanical alloying, which is one of the main barriers toward the widespread application of...
Combined plasmonic nanocrystals and metal–organic framework
thin-films are fabricated for sensing gases in the near-infrared
range. This nanocomposite thin-film shows a highly sensitive response
in near-infrared absorption, which is attributed to preconcentration
of gas molecules in metal–organic framework pores causing close
proximity to the electromagnetic fields at the plasmonic nanocrystal...
Full Text:
–organic framework
thin-films are fabricated for sensing gases in the near-infrared
range. This
Continuous microreactor-assisted solution deposition is demonstrated for the deposition
of CdS thin films on fluorine-doped tin oxide (FTO) coated glass. The continuous flow
system consists of a microscale T-junction micromixer with the co-axial water circulation
heat exchanger to control the reacting chemical flux and optimize the heterogeneous surface
reaction. Dense,...
Converting CO2 to valuable materials is attractive.Herein, we report using simple metallothermic reactions to reduce atmospheric CO2 to dense nanoporous graphene. By using a Zn/Mg mixture as a reductant, the resulted nanoporous graphene exhibits highly desirable properties: high specific surface area of 1900 m2/g, a great conductivity of 1050 S/m...
Full Text:
33620, United States
Received 26 September 2014; received in revised form 28 October 2014; accepted 6