Index Catalog // ScholarsArchive@OSU

Effect of moisture changes on the shrinking, swelling, specific gravity, air or void space, weight and similar properties of wood

Creator:: Forest Products Laboratory (U.S.) and MacLean, J. D. (James Donald)
Abstract:: Information reviewed and reaffirmed, September 1958. Original report dated August 1944.
Resource Type:: Technical Report
Full Text:: shrinkage of the conifers or softwoods usually ranges from about 8 to 14 percent. Since air-dry wood usually

The suitability of the rod mill in beating cotton linter pulp

Creator:: Chidester, G. H., Swanson, W. H., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: . R933 -11- Procedure Three trials were made at consistences of 3.6, 10, and 14 per cent at a speed

Relationship of locality and rate of growth to density and strength of douglas-fir

Creator:: Forest Products Laboratory (U.S.) and Drow, John T.
Abstract:: Information reviewed and reaffirmed 1965. Original report issued May 1957.
Resource Type:: Technical Report
Full Text:: obtained. The balance of 14 samples covers only specific gravity data. These 14 shipments include 1,796 of

Shear stress in two wood beams over wood block supports

Creator:: Forest Products Laboratory (U.S.) and Cowan, William C.
Resource Type:: Technical Report
Full Text:: horizontal shear stress distribution curves over the middle support are shown in figure 14. Determination of

The moduli of rigidity of Douglas-fir at about 11 percent moisture content

Creator:: Doyle, D. V., McBurney, R. S., Drow, John T., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1956.
Resource Type:: Technical Report
Full Text:: ft1e.clf,lcaiions9 p L43-2?. fhe remalning portlons of .each log.end were cut 14!o flat+s4wn and quart€r-s

Determination of cellulose and amount of chlorine consumed in its isolation : a short method

Creator:: Forest Products Laboratory (U.S.) and Bray, Mark W.
Abstract:: Published in Industrial & Engineering Chemistry, January 15, 1929
Resource Type:: Technical Report
Full Text:: investigators chlorinated their material in beakers, placed in a specially designed apparatus, while other sg '4

Interlaminar shear strength of glass-fiber-reinforced plastic laminates

Creator:: Werren, Fred, Heebink, Bruce G., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued September 1955.
Resource Type:: Technical Report
Full Text:: panels. Panel 421 was cured at 14 pounds per square inch, panel 421A at 5 pounds per square inch, and

Sulfite pulp for papreg : laminates from pulps made from short and standard length black spruce chips

Creator:: Keller, Eugene L., McGovern, John Neilson, 1908-, and Forest Products Laboratory (U.S.)
Abstract:: Publication restrictions have been removed. This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: black spruces had an estimated- SG perceftt-loWer average fiber length than a similarly prepared' pulp

Preservation of timber by the steeping process

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed November 1959. Original report dated October 1954.
Resource Type:: Technical Report
Full Text:: mercuric chloride to 99 pounds of water, which is about equal to adding 14 ounces of the dry chemical to

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of plates of any symmetrical construction. Edges simply supported. Buckling of plates with two edges clamped.

Creator:: March, H. W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Original report published 1942.
Resource Type:: Technical Report
Full Text:: satisfy the sirnultaneous equations: , 4= (14 ) ( l 5 ) ( 16 ) 16E1 2 -382 - 3Etya t?E flz - 4A

Durability of resin-treated paper honeycomb core

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed in 1965. Original report issued November 1959.
Resource Type:: Technical Report
Full Text:: twenty-two 14- by 12- by 2-3/8-inch thick panels for each. of the three kinds of constructions--core

The effect of changes in the equilibrium relative vapor pressure upon the capillary structure of wood

Creator:: Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: -------------------------- --------- -------- ----------------------- - 0 C . Distilled water : 40 96 .3 Saturated BaC12 : 40 SG . 7 Saturated NaCl

Practical suggestions on frame house construction

Creator:: Trayer, George W. (George William), 1888-1976 and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, April 1950.
Resource Type:: Technical Report
Full Text:: with a high-grade but shallowe r material . Several of the listed reference sg- have tables which give

Study of groundline treatments applied to five pole species

Creator:: Forest Products Laboratory (U.S.), Panek, Edward, Blew, Joseph Oscar, 1904-, and Baechler, Roy H.
Resource Type:: Technical Report
Full Text:: . Average moisture meter readings for the lodgepole pine pole stubs was about 14 percent. Test stubs of the

Distribution of strength values in wood for aircraft construction

Creator:: Forest Products Laboratory (U.S.), Drow, John T., Clark, M. E., and Wilson, T. R. C. (Thomas Randall Carson), 1884-
Abstract:: Information reviewed and reaffirmed, 1965.
Resource Type:: Technical Report
Full Text:: between 9., and 14.) percent were accepted., ancl average adJustment factors for the specles and strength

Supplement to bolt-bearing properties of glass-fabric-base plastic laminates

Creator:: Youngs, R. L. (Robert Leland), 1924- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued October 1955.
Resource Type:: Technical Report
Full Text:: percent benzoyl peroxide by weight. Each panel was cured at a pressure of 14 pounds per square inch for 90

Effect of surface treatment on the adhesive bonding properties of magnesium

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: PROPERTIES Of MAGNESIUM rdt.r 1SC5 June 1958 NigtApk. oc-r 14 ligw 0 This Report is One of a Series

Effects of variations in design on the strength of some typical glued fastenings in wood aircraft

Creator:: Yolton, L. A., Sanborn, W. A., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: graphically ln figure 14, Report No. 1526 -9- Each plottet l -point represents the average ul t inate

Durability of glued wood to metal joints

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed October 1954.
Resource Type:: Technical Report
Full Text:: change in the nature by Processes 5 and 6 showed nesignificant changes outdoors. Report No. 1570 -14

Substitute woods for Port Orford white-cedar for storage battery separators

Creator:: Peakes, Lawson Vernon, Lloyd, Roger A., Barnes, V. S., Berry, J. H., Ritter, George J., and Forest Products Laboratory (U.S.)
Abstract:: In cooperation with the Office of Production Research and Development of the War Production Board.
Resource Type:: Technical Report
Full Text:: per kilograms o f solution, a .selution of-14 .6-percent concentration would-be obtained . The sodium

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of flat plywood plates in uniform shear with face grain at angled of 0 degrees, +45 degrees, and 90 degrees

Creator:: Voss, Arnold W., Norris, Charles, B. (Charles Brazer), 1894-, Palma, Joseph, and Forest Products Laboratory (U.S.)
Abstract:: Revised July 1950. Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: extremes, the frame rnenbers were 314 ly z-)14 lnebes, A gap of approxlnately f/f6 inch vras rnain- tained

Durability of low-density core materials and sandwich panels of the aircraft type as determined by laboratory tests and exposure to the weather

Creator:: Forest Products Laboratory (U.S.), Heebink, Bruce G., Kommers, William J., and Kunzweiler, John J.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: relative humidity. Report No: 1573 -14-- Decay Resistance Results for the balsa specimens (excluding

The effect of veneer thickness and grain direction on the shear strength of plywood

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Werren, Fred, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed July 1961. Original report published July 1948.
Resource Type:: Technical Report
Full Text:: results. Rept. No. 1801 -14- Table 1.--Shear-strength values for five-ply yellow birch plywood- as

Effect of long-term loading on glass-reinforced plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed 1965. Revised September 1958.
Resource Type:: Technical Report
Full Text:: through 14. Stress-Rupture Equipment Since the long-term tests in this investigation were to be carried

Supplement to compression, tension, and shear tests on yellow-poplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : tension tests

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, 1962. Original report published 1945.
Resource Type:: Technical Report
Full Text:: of specimens of series A are shown in figures 14 to 23, inclusive. Figure 24 shows how a variation

Supplement to buckling of long, thin, plywood cylinders in axial compression : experimental treatment

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: Publication restriction has been removed.
Resource Type:: Technical Report
Full Text:: . Column 14: The buckling stress was taken as the buckling load divided by the cross-sectional area of the

Certain properties of papreg as affected by laminating pressure, resin content, and volatile content

Creator:: Forest Products Laboratory (U.S.), Seidl, Robert J., Mackin, G. E., and Baird, Parker K.
Abstract:: Information reviewed and reaffirmed, March 1956. Original report dated 1943.
Resource Type:: Technical Report
Full Text:: PA I 14-1 K1 K1 K1 K1 --1- K1 K1 --K14- %-"- P4 I 1I 1 I 1 Ie• •• •• Oft .• •• Of

Buckling of thin-walled plywood cylinders in torsion

Creator:: Forest Products Laboratory (U.S.), March, H. W., Norris, Charles, B. (Charles Brazer), 1894-, Smith, C. B., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed August 1960. Original report dated June 1945.
Resource Type:: Technical Report
Full Text:: + Sa2e2 Q1x3 _+ a 3 = '(14 ) sin px (i ) fs2 Report No . 1529 .• ti { : ' ,ti The

A single stiffener parallel to stress

Creator:: Forest Products Laboratory (U.S.), Smith, C. B., Ringelstetter, L. A., and Norris, Charles, B. (Charles Brazer), 1894-
Abstract:: Information reviewed and reaffirmed 1960. Original report dated 1947.
Resource Type:: Technical Report
Full Text:: of the critical dtifferier over a considerable range of values . and Report No. 1553-B . . -14

Furnace-type lumber dry kiln

Creator:: Torgeson, Oscar W., Smith, Harvey H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1963.
Resource Type:: Technical Report
Full Text:: the kiln door . Figure 14 shows the operatin g equipment, consisting of a drying oven, triple-beam

Pulping and papermaking experiments on certain pines of Mexico and Central America

Creator:: Forest Products Laboratory (U.S.), Schafer, Earl R., and Chidester, G. H.
Resource Type:: Technical Report
Full Text:: results might be obtained with a duller stone surface. Miscellaneous wood was therefore ground for 14

Service records on treated and untreated fence posts

Creator:: Forest Products Laboratory (U.S.), Blew, Joseph Oscar, 1904-, and Kulp, John W.
Abstract:: Revised October 1959. Original report published in December 1954.
Resource Type:: Technical Report
Full Text:: -, 4-4 4-, a3 C-4rc-cil 14 1,) 1),) 7) t -.',--)4 --' V., 3N9 ,. trl td u) , '04c1,,,IV

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of flat plywood plates in compression with face grain at 0 degrees and 90 degrees to load

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1962. Original dated June 1943.
Resource Type:: Technical Report
Full Text:: June lg4t I N r oP, u AT ',0}1 illlllil' *o IWTDM A{ic|r++sg LOAN COPY P l e a s e r e t u r n

Tests of glued laminated wood beams and columns and development of principles of design

Creator:: Wilson, T. R. C. (Thomas Randall Carson), 1884-, Cottingham, Willard Sherwin, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed in October 1952.
Resource Type:: Technical Report
Full Text:: = [1 - (k/14') El - 1/4(k/b)] Report No. 81687 -3- where y = the ratio of allowable stress in the

Finishing wood in aircraft

Creator:: Forest Products Laboratory (U.S.) and Browne, F. L. (Frederick Lincoln), 1895-
Abstract:: This report is one of a series issued to aid the nation's war program.
Resource Type:: Technical Report
Full Text:: inaccessible after assembling .„ . ..,. 73— Effect of glue saueeze,out on finish . •. -,;14

Fatigue resistance of quarter-scale bridge stringers in flexure and shear

Creator:: Forest Products Laboratory (U.S.) and Lewis, Wayne C., 1914-
Resource Type:: Technical Report
Full Text:: slope of grain 13. Air-dry, unchecked Douglas-fir with straight grain 14. Air-dry, unchecked DOuglas

The woods of Liberia

Creator:: Forest Products Laboratory (U.S.), Fobes, E. W., and Kryn, Jeannette Miriam, 1913-
Resource Type:: Technical Report
Full Text:: high forest areas of Gamu-St. John in Liberia as well as in the Ivory Coast (14, 25, 29)._ The

Properties of white fir and their relation to the manufacture and uses of the wood.

Creator:: Johnson, R. P. A. (Robert Pilson Albert), 1888, Brundage, M. R. (Marsden Robert), 1892-, and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: .................... lo 11 12 12 13 13 13 14 14 14 17 18 20 24 24 25 26 26 26 28 29 30 32 32 32

Wood handbook : wood as an engineering material

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.
Resource Type:: Technical Report
Full Text:: Timber, and Ties Lumber 7–1 Round Timbers and Ties 7–13 Literature Cited 7–14

Guidebook for the identification of woods used for ties and timbers

Creator:: Koehler, Arthur, 1885- and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report

Bearing strength of wood members reinforced with plywood and cross-banded compreg under single and multiple aircraft bolts

Creator:: Forest Products Laboratory (U.S.), Sanborn, W. A., Goodell, H. R., Ely, A. W., and Phillips, R. S.
Abstract:: Information reviewed and reaffirmed March 1956 and 1962. Original report issued Sept. 1946.
Resource Type:: Technical Report

Search Constraints

Search Results

Limit your search