Index Catalog // ScholarsArchive@OSU

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Resource Type:: Technical Report
Full Text:: feather edge at about the middle of the joint on each edge of the specimen. The practice in testing finger

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed October 1954.
Resource Type:: Technical Report
Full Text:: -joint area at the end of the 1- by 2-inch pieces into which they were subsequently cut. Glue B was

Creator:: Eickner, Herbert W., Mraz, Edward A., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed July 1955 and 1962.
Resource Type:: Technical Report
Full Text:: gluing wood to metal. Lap-joint specimens prepared by gluing strips of metal to wood were stressed

Creator:: Forest Products Laboratory (U.S.), McLeod, A. M., Yolton, L. A., Sanborn, W. A., and Phillips, R. S.
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: : 1. Standard shear test for wood, according to the American Society fo r Testing Materials, Serial

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, August 1961. Original report dated November 17, 1943.
Resource Type:: Technical Report
Full Text:: responsible for most of the reduction in joint strength when casein glue joints are subjected to alternating

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: variability of lap-joint strength data from tests for adhesive acceptance, laboratory control, adhesive

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Resource Type:: Technical Report
Full Text:: tool ready for testing. The plane of the glue joint must coincide with the interface between the

Creator:: Truax, T. R. (Thomas Roy), 1886-, Selbo, M. L. (Magnus Leonard), 1901-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: years some form of joint test has been the common and generally accepted method of testing most glues

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: number of gluing processes; but in that study tests were made only on lap- joint shear specimens of

Creator:: Werren, Fred, Freas, Alan D'Yarmett, 1910-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed October 1961. Original report published in October 1950.
Resource Type:: Technical Report
Full Text:: . : P.s.i. P.s.i. : : : P.s.i. 1/2 2 3-1/2 1,640 560 530 Lap-Joint Adhesive, Resin 2 6,680 9,500

ScholarsArchive@OSU