Index Catalog // ScholarsArchive@OSU

Creator:: Johnson, L. F. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956. Original report issued April 1949.
Resource Type:: Technical Report
Full Text:: . The upper or wearing surface of floor Pp was FS-1A magnesium alloy 0.090 inch thick, and that of floor

Creator:: Forest Products Laboratory (U.S.) and Jordan, C. A.
Resource Type:: Technical Report
Full Text:: . Therefore, a direct current preamplifier set at a gain of 250 times was connected between the calibration

Creator:: Lewis, Wayne C., 1914-, Heebink, T. B. (Thomas Bruce), 1914-, Cottingham, Willard Sherwin, Dawley, E. R., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, April 1960. Original report dated October 1943.
Resource Type:: Technical Report
Full Text:: pounds per square inch. f = calculated unit shear stress, in pounds per square inch, ats cr 2It Fs

Creator:: Forest Products Laboratory (U.S.), Sherrard, Earl Charles, and Harris, Elwin E.
Abstract:: Published in Industrial & Engineering Chemistry, January 1932.
Resource Type:: Technical Report
Full Text:: 30 15 ' 70 180 60 252 68 250 90 35 65 500 210 630 60 3 10ne gram in 15 cc . H2SO4 . 2Charring . 3No

Creator:: Forest Products Laboratory (U.S.) and Ethington, Robert L.
Resource Type:: Technical Report
Full Text:: by Bechtel and Norris is: 4 = )Ft ( T )2 Fs Report No. 2156 -7- where Ft and Fs are the

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, 1958.
Resource Type:: Technical Report
Full Text:: Plaskon No. 250-2, a cold-setting urea7formaldehyde resin glue. Webs consisted of three alternate plies

Creator:: McGovern, John Neilson, 1908-, Keller, Eugene L., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: -laminated plastics prepared under curing conditions of • 250 pounds per square inch pressure at 321° F, from

Creator:: Forest Products Laboratory (U.S.), Meyer, H. R., and Erickson, E. C. O.
Abstract:: Information reviewed and reaffirmed January 1959 and 1965. Original report issued Jan. 1945.
Resource Type:: Technical Report
Full Text:: , respectively, and pressed fo r 12 minutes at 250 pounds per square inch . Each of the 1/2 inch thick panels wa

Creator:: Panek, Edward, Heebink, Bruce G., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956. Original publication dated May 1948.
Resource Type:: Technical Report
Full Text:: (vacuum pressure) and at temperatures of 250° F. or less. To date, however, no such glue has been made

Creator:: Miller, Raymond N., Swanson, W. H. (Wilbur Harold), and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: to a 250 cc . tall form pyrex beake r cut off just below the lip, making a size which fitted con

ScholarsArchive@OSU