Probability density functions (normal, lognormal, and three-parameter Weibull) were used to characterize strength data for three different types of metal-plate-connected wood truss joints (web at the bottom chord, tension splice, and heel). Modulus of elasticity (MOE) of the lumber used to fabricate the joints was also characterized. A probability-plot technique,...
"This publication has presented an overview of current research on MPC joints in wood trusses. The literature search was primarily of U.S. sources, with some effort to obtain literature from other parts of the world. An enormous amount of important information has been amassed by studies on testing procedures and...
The objective of this study was to test a method under development for assigning allowable properties to foreign species graded by American Lumber Standard machine-stress-rated (MSR) rules. The method was tested on dahurian larch (Larix dahurica), a major softwood species that grows in the Russian Far East and could be...
This study evaluated the effects of pretreatment incising of dry lumber and preservative treatment on the shear strength of 1980 pieces of 2 X 4 dimension lumber (nominal 50 mm X 100 mm X 3.6 m long). Three species groups (Douglas-fir, Hem-Fir. and Spruce-Pine-Fir-South) and two commercially produced machine-stress-rated grades...
The objective of this study was to compare the shear strength of structural composite lumber (SCL) based on shear block to that of shear strength based on torsion test. Shear blocks in two diflcrent orientations fom laminated veneer lumber, parallel strand lumber, and laminated strand lumber (LSL) were tested and...
The objective of this research was to use a three-dimensional (3D) analysis method to evaluate “system effects” in light-frame roof truss assemblies. The goal of this study was to develop an improved and practical design method for 3D roof truss assemblies used in residential construction. A truss plate manufacturer (TPM)...
The forces exerted on light-frame wood buildings as a result of surge and waves are not fully understood. With a better understanding of these types of forces, it may eventually be possible to build coastal structures to better withstand the loads. In this paper, a recent two part experimental study...
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic and cyclic loads by: 1) determining variability of shear wall performance; 2) comparing performance of walls under each loading protocol; 3) evaluating effects of anchorage on wall performance; and 4) evaluating performance of walls...
The goal of this study was to develop an understanding of the nature of wave loading on a wood-framed scale residential building model for a variety of building configurations and test conditions. Testing was performed on a 1/6th scale two-story wood-framed residential structure. The structure was impacted with waves and...
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic, cyclic, and earthquake loads by: 1) comparing performance under each loading protocol; 2) evaluating effects of anchorage; and 3) eval-uating performance qualitatively and quantitatively with respect to code-defined performance measures. Tests were conducted on...
Earthquake performance of wood-frame shear walls was evaluated by comparing fully and partially anchored walls under monotonic, cyclic, and earthquake loads and comparing with code measures. Suitability of monotonic and cyclic testing to predict seismic performance was examined. Earthquake tests were conducted on 2440-mm-square walls with Douglas-fir studs. Two oriented...
Recent natural disasters around the world including
both tsunamis and hurricanes, have highlighted the inability
of wood buildings to withstand wave and surge
loading during these extreme events. Little is known
about the interaction between coastal residential light-frame
wood buildings and wave and surge loading because
often little is left...
Tsunami force and pressure distributions on a rigid
wall fronted by a small seawall were determined experimentally
in a large-scale wave flume. Six different
seawall heights were examined, two of which were exposed
to a range of solitary wave heights. The same
experiment was done without a seawall for comparison....
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
Goals of this preliminary study are to better understand (1) earthquake performance of wood-frame shear walls carrying gravity loads, compared with walls without gravity load, and (2) performance of walls subjected to a sequence of earthquake motions, compared with walls subjected to a single earthquake.
Tests with simulated earthquake ground...
It is commonly accepted in the analysis of wood beams that the neutral axis coincides with the beam's centroid. However, wood is not an isotropic material, has different elastic properties in the tangential, radial and longitudinal directions, and is non-homogeneous, as it contains characteristics such as knots. Therefore, there is...
For wood beams, it is often assumed that the neutral axis (NA) is located at the centroid of the beam. This would be the case for isotropic and homogeneous materials but these prerequisites are not valid for wood. The varying grain patterns and knots located throughout wood make wood anisotropic...
The construction industry has relied heavily on wood and wood-based composites, such as oriented strand board (OSB) and plywood for timber frame construction. Therefore, it is highly imperative to categorize the response of wood-based composites when exposed to elevated temperatures for a sustained period of time. The essence of fire-resistant...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
This study investigates the applicability of the database-assisted design (DAD) methodology to predict structural reactions in a light-framed wood structure subjected to fluctuating wind pressures. Structural influence functions were determined on a 1/3-scale light-frame wood structure, which was then subjected to a wind flow, while the surface pressures and structural...