We, for the first time, demonstrate that orthorhombic V₂O₅ can exhibit superior electrochemical performance in sodium ion batteries when uniformly coated inside nanoporous carbon. The encapsulated V₂O₅ shows a specific capacity as high as 276 mAh/g, while the whole nanocomposite exhibits a capacity of 170 mAh/g. The V₂O₅/C composite was...
Full Text:
,† Xingfeng Wang,† William F.
Stickle,‡ Galen D. Stucky§ and Xiulei Ji*†
†
Department of Chemistry, Oregon
Despite the considerable advances of deposition technologies, it remains a significant challenge to form conformal deposition on surface of nanoporous carbons. Here, we introduce a new ambient hydrolysis deposition method that employs and controls pre-adsorbed water vapor on nanoporous carbons to define the deposition of TiO₂. We converted the deposited...
Full Text:
Wang,
a
William F. Stickle
b
and Xiulei Ji*
a
Despite the considerable advances of
Porous silicon prepared by low-cost and scalable magnesiothermic reactions is a promising anode material for Li-ion batteries; yet, retaining good cycling stability for such materials in electrodes of practical loading remains a challenge. Here, we engineered the nanoporous silicon from a modified magnesiothermic reaction by controlled surface oxidization forming a...
Full Text:
Areya, Wei Luob, Xiulei Jib,
Chongmin Wanga, Jun Liua,n, Ji-Guang Zhanga,n
aPacific Northwest National
We, for the first time, employ magnesiothermic reaction to convert microwave-irradiated graphite oxide to pure graphene. The magnesiothermic reaction raises the carbon to oxygen atomic ratio from 22.2 to 165.7 and maintains a high surface area. The new strategy demonstrates an efficient method for obtaining highly pure graphene materials.
A low-voltage plateau at ∼0.3 V is discovered during the deep sodiation of Na₃V₂(PO₄)₃ by combined computational and experimental studies. This new low-voltage plateau doubles the sodiation capacity of Na₃V₂(PO₄)₃, thus turning it into a promising anode for Na-ion batteries.
Full Text:
batteries
Jian, Z., Sun, Y., & Ji, X. (2015). A new low-voltage plateau of Na₃V₂(PO₄)₃ as an
anode for Na
We introduce a novel ambient hydrolysis deposition (AHD) methodology that, for the first time, employs sequential water adsorption followed by a hydrolysis reaction to infiltrate tiny SnO2₂ particles inside nanopores of mesoporous carbon in a conformal and controllable manner. The empty space in the SnO2₂/C composites can be adjusted by...
We demonstrate a novel synthetic route to fabricate a one-dimensional
peapod-like Sb@C structure with disperse Sb
submicron-particles encapsulated in carbon submicron-tubes.
The synthetic route may well serve as a general methodology
for fabricating carbon/metallic fine structures by thermally
reducing their carbon-coated metal oxide composites.
Sodium-ion batteries are emerging as a highly promising technology for large-scale energy
storage applications. However, it remains a significant challenge to develop an anode with
superior long-term cycling stability and high-rate capability. Here we demonstrate that the
Na⁺ intercalation pseudocapacitance in TiO₂/graphene nanocomposites enables high-rate
capability and long cycle life...
Full Text:
, C., Wen, Y., Hu, X., Ji, X., Yan, M., Mai, L., ... & Huang, Y. (2015). Na+
intercalation
Air-cathode fabrication is currently a key factor that hinders the scaling up of microbial fuel cell (MFC) technology. A new type of cathode material that contains porous polyethylene (PE) sheet and a blended activated carbon (AC) and highly conductive carbon back (CB) layer was developed for the first time. The...
We report an inverse relationship between measurable porosity values and reversible capacity from sucrose-derived hard carbon as an anode for sodium-ion batteries (SIBs). Materials with low measureable pore volumes and surface areas obtained through N₂ sorption yield higher reversible capacities. Conversely, increasing measurable porosity and specific surface area leads to...