Index Catalog // ScholarsArchive@OSU

Start Over

Filtering by: Creator Kuenzi, Edward W. Resource Type Technical Report Rights Statement Copyright Not Evaluated Subject Sandwich construction -- Testing

1. Supplement no. 2 to stresses induced in a sandwich panel by load applied at an insert

Creator:: Youngquist, W. G., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued February 1956.
Resource Type:: Technical Report

2. Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published in August 1949.
Resource Type:: Technical Report

3. Mechanical properties of aluminum honeycomb cores

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued September 1955.
Resource Type:: Technical Report

4. Stresses induced in a sandwich panel by load applied at an insert

Creator:: Youngquist, W. G., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Original report issued March 1955.
Resource Type:: Technical Report

5. Buckling of simply supported rectangular sandwich panels subjected to edgewise bending

Creator:: Forest Products Laboratory (U.S.), Jahnke, W. E., and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce
Resource Type:: Technical Report

6. Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report

7. Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued April 1952.
Resource Type:: Technical Report

8. Flexure of structural sandwich construction

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1958. Original report issued December 1951.
Resource Type:: Technical Report

9. Preliminary evaluation of a vacuum-induced concentrated-load sandwich tester

Creator:: Ericksen, Wilhelm S., Kuenzi, Edward W., Heebink, Bruce G., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1958. Original report issued June 1952.
Resource Type:: Technical Report

10. Buckling of sandwich cylinders in torsion

Creator:: Forest Products Laboratory (U.S.), March, H. W., and Kuenzi, Edward W.
Abstract:: Originally prepared and distributed in June 1953. Revised December 1957. Information reviewed and reaffirmed in 1965.
Resource Type:: Technical Report

11. Edgewise compressive strength of panels and flat wise flexural strength of strips of sandwich constructions

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed 1958. Original report issued November 1951.
Resource Type:: Technical Report

12. Buckling of cylinders of sandwich construction in axial compression

Creator:: Forest Products Laboratory (U.S.), March, H. W., and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Revised December 1957. Original report published June 1952.
Resource Type:: Technical Report

13. Methods of testing sandwich construction at elevated temperatures

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report

14. Mechanical properties of aluminum multiwave cores

Creator:: Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Setterholm, Vance C.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report

15. Durability of low-density sandwich panels of the aircraft type as determined by laboratory tests and exposure to weather

Creator:: Forest Products Laboratory (U.S.), Setterholm, Vance C., Heebink, Bruce G., and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce
Resource Type:: Technical Report

16. Supplement to stresses induced in a sandwich panel by load applied at an insert

Creator:: Youngquist, W. G., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed in 1960.
Resource Type:: Technical Report

17. Evaluation of a vacuum-induced concentrated-load sandwich tester

Creator:: Forest Products Laboratory (U.S.), Heebink, Bruce G., Kuenzi, Edward W., and Ericksen, Wilhelm S.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report