Index Catalog // ScholarsArchive@OSU

Start Over

Filtering by: Subject Packaging -- Compression testing Creator Kuenzi, Edward W. Resource Type Technical Report

Buckling of thin, curved, plywood plates in axial compression

Creator:

Forest Products Laboratory (U.S.) and Kuenzi, Edward W.

Abstract:

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1960.

Resource Type:

Technical Report

Full Text:

material were pressed flat and subsequently cut into minor coupons for testing in bending, compression, and
Longitudinally stiffened thin-walled plywood cylinders in axial compression

Creator:

Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Norris, Charles, B. (Charles Brazer), 1894-

Abstract:

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956. Original report issued April 1948.

Resource Type:

Technical Report

Full Text:

prepared for testing in compression by gluing together six 1- by 4-inch pieces. The pieces were not glued
Effect of length on the buckling stresses of thin-walled, plywood cylinders in axial compression.

Creator:

Forest Products Laboratory (U.S.) and Kuenzi, Edward W.

Abstract:

Original report issued October 1944.

Resource Type:

Technical Report

Full Text:

CYLINDERS IN AXIAL COMPRESSION- B y EDWARD W . KUENZI, Enginee r Forest Products Laboratory,? Forest