Index Catalog // ScholarsArchive@OSU

Thin-walled plywood cylinders in bending

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of Aeronautical Board. Information reviewed and reaffirmed 1962. First issued February 1944.
Resource Type:: Technical Report
Full Text:: WIN-WALLED PLYWOOD CYLINDERS IN LENDING February 1944 INC4414MA

Thin-walled plywood cylinders in bending and torsion

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed January 1960.
Resource Type:: Technical Report
Full Text:: zjvci,,gsE 196n WALLED PLYWOOD CYLINDERS IN BENDING AND TORSION

A comparison of the buckling strength of thin-walled cylindrical and barrel-shaped plywood shells

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed, 1962. Original report dated June 1943. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: CYLINDRICAL AND BARREL.-SIAPIEID PLYWOOD WILLS June 1943 Wood Engineering Research itifekik Forest

Stability of a few curved panels subjected to shear

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated May 1947.
Resource Type:: Technical Report
Full Text:: on the extension of the theory for plywood to the sandwich type of construction. The results of the

Supplement to buckling of long, thin, plywood cylinders in axial compression : experimental treatment

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: Publication restriction has been removed.
Resource Type:: Technical Report
Full Text:: the plywood and man y others. In considering the varia- tion of the mechanical properties of the

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed in 1965. Original report issued December 1959.
Resource Type:: Technical Report
Full Text:: the mechanical properties and measurements of the specimens. A method of measuring initial facing

Mechanical properties of several honeycomb cores

Creator:: Stevens, Gordon H., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: SERVICE MADISON S. WISCONSIN n Cooperation with the University of Wisconsin MECHANICAL PROPERTIES OF

Method for determining tensile properties of paper

Creator:: Forest Products Laboratory (U.S.), Setterholm, Vance C., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed 1962. Original report issued December 1956.
Resource Type:: Technical Report
Full Text:: -overlaid lumber and plywood for both exterior and interior uses, paper honeycomb cores for sandwich, and

Method of measuring the shearing moduli in wood

Creator:: March, H. W., Kuenzi, Edward W., Kommers, William J., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued to aid the nation's war program. Publication restrictions have been removed.
Resource Type:: Technical Report

Mechanical properties of some heat-resistant metal honeycomb cores

Creator:: Kuenzi, Edward W., Jahnke, W. E., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: [CULTURE ROOM /E#7..Z. MECHANICAL PROPERTIES CI SOME HEAT

Shear stability of flat panels of sandwich construction

Creator:: Kuenzi, Edward W., Ericksen, Wilhelm S., Zahn, John J., and Forest Products Laboratory (U.S.)
Abstract:: Revised May 1962. Original report dated May 1947.
Resource Type:: Technical Report
Full Text:: behavior of flat plywood panels when subjected to shear. An approximate ex- tension of the plywood theories

Effect of core thickness on shear properties of aluminum honeycomb core

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: inch, which agrees with the values in table 1. 4Kuenzi, E. W. Mechanical Properties of Aluminum

Mechanical properties of aluminum multiwave cores

Creator:: Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Setterholm, Vance C.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: FOREST SERVICE MADISON 5, WISCONSIN In Cooperation with the University of Wisconsin MECHANICAL

Structural sandwich design criteria

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Resource Type:: Technical Report
Full Text:: under this load shall be no more than 0.20 inch. The facings are to be of plywood having an effective

Mechanical properties of glass-fabric honeycomb cores

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction for Aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1965. Original report issued March 1957.
Resource Type:: Technical Report
Full Text:: DEPARTMENT OF AGRICULTURE FOREST SERVICE In Cooperation with the University of Wisconsin MECHANICAL

Determination of mechanical properties of adhesives for use in the design of bonded joints

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued January 1956.
Resource Type:: Technical Report
Full Text:: DETERMINATION CIF MECHANICAL PROPERTIES or ADHESIVES FOR USE IN

Mechanical properties of aluminum honeycomb cores

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued September 1955.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES Of ALUMINUM IrIONEYCOMI3 COMES No. 1849

ScholarsArchive@OSU

Thin-walled plywood cylinders in bending

Thin-walled plywood cylinders in bending and torsion

A comparison of the buckling strength of thin-walled cylindrical and barrel-shaped plywood shells

Stability of a few curved panels subjected to shear

Supplement to buckling of long, thin, plywood cylinders in axial compression : experimental treatment

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Mechanical properties of several honeycomb cores

Method for determining tensile properties of paper

Method of measuring the shearing moduli in wood

Mechanical properties of some heat-resistant metal honeycomb cores

Shear stability of flat panels of sandwich construction

Effect of core thickness on shear properties of aluminum honeycomb core

Mechanical properties of aluminum multiwave cores

Structural sandwich design criteria

Mechanical properties of glass-fabric honeycomb cores

Determination of mechanical properties of adhesives for use in the design of bonded joints

Mechanical properties of aluminum honeycomb cores

Limit your search

Creator

Date

Decade

File Format

Language

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search