Vapam(r) (NaMDC) is the fumigant most commonly used to arrest and control decay of utility poles. While volatile fungitoxins are detectable only 1 to 2 years after treatment, poles treated with Vapam(r) remain free of decay fungi for 6 to 17 years. Vapam(r) decomposes to produce volatile fungicides as well...
A small block test was used in assessing whether pelletized sodium n-methyldithiocarbamate (NaMDC) would decompose and produce methylisothiocyanate (MITC) and thereby eliminate Antrodia carbonica colonies from Douglas-fir heartwood. Also evaluated were the effects of wood moisture content, dosage, incubation period, pH level, and presence of copper sulfate on percentage of...
The effects of moisture content, flow direction, concentration, and temperature on the diffusion of chloropicrin in Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) heartwood were investigated. Diffusion coefficients were strongly affected by wood moisture content. Coefficients for radial and tangential diffusion at the fiber-saturation point were twice as high as those at...
Studies of the effects of various chemicals on fungal growth are difficult to perform on filamentous fungi because of the difficulty of observing the protoplasm through the rigid hyphal wall, and because most activity occurs in the region near the hyphal tip. However, hyphae can be exposed to certain enzymes...
The relationship between moisture content and the presence of methylisothiocyanate (MITC) in wood following various applications of sodium n-methyldithiocarbamate (NaMDC) was investigated with small Douglas-fir heartwood blocks. While MITC levels were initially higher in wetter blocks, MITC levels in drier blocks remained more stable over the 8-week test period. The...
Adverse effects on mechanical properties from using a supercritical fluid (SCF) to increase preservative penetration of refractory woods were evaluated by treating small ponderosa pine sapwood specimens with supercritical carbon dioxide at 64 combinations of temperatures (35 to 80 C), pressure (1,000 to 4,000 psig), and time (0.5 to 2...
A new laboratory technique to simulate the initiation of wood decay and to assess the effects of incipient decay on material properties is described. Douglas-fir heartwood specimens were exposed to brown-rot (Postia placenta and Gloeophyllum trabeum) fungi for various periods. Bendlng properties were determined by nondestructive and destructive tests, and...
Impact bending and breaking radius were used to measure loss in toughness caused by basidiomycetes isolated from wood. Small test pieces were used to accelerate testing. Wide differences were found among, and sometimes within, the 26 species tested. Brown-rot fungi tended to cause greater losses than white-rot fungi, but no...
Differences in stain susceptibility were evaluated on sterile and unsterile samples of freshly sawn, frozen and thawed, or oven-dried and rewetted ponderosa pine sapwood. Samples treated with sterile medium or with medium inoculated with either Pseudomonas putida or Bacillus subtilis were inoculated with selected wood-staining fungi. In general, fresh unsterile...
The effect of various wood characteristics on decomposition of metham sodium to methylisothiocyanate in sixteen North American and Southeast Asian hardwoods and softwoods was investigated. While marked differences were noted in the degree of decomposition among some species, the relationship between decomposition and lignin content, extractive levels, wood pH, or...