Index Catalog // ScholarsArchive@OSU

Creator:: Eickner, Herbert W., Mraz, Edward A., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed July 1955 and 1962.
Resource Type:: Technical Report
Full Text:: gluing wood to metal. Lap-joint specimens prepared by gluing strips of metal to wood were stressed

Creator:: Forest Products Laboratory (U.S.), Black, John M., Olson, W. Z., and Bruce, H. D.
Abstract:: Information reviewed and reaffirmed, 1961. Original report dated 1945.
Resource Type:: Technical Report
Full Text:: the glued joint is not known. Accordingly, this study is being conducted in an attempt to determine

Creator:: Olson, W. Z., Bruce, H. D., Soper, V. R., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: glue line. After wetting, the specimens were tested at once in a standard plywood-joint- testing

Creator:: Olson, W. Z., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed July 1955.
Resource Type:: Technical Report
Full Text:: of the assembly period and tempera- ture on the joint strength. Nine glues, designated by letters in

Creator:: Olson, W. Z., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956. Original report published in 1946.
Resource Type:: Technical Report
Full Text:: and curing the glue. The quality of the joints so made was ascertained by testing specimens in shear

Creator:: Forest Products Laboratory (U.S.), Olson, W. Z., Bruce, H. D., and Soper, V. R.
Abstract:: Information reviewed and reaffirmed August 1958. Original report issued August 1946.
Resource Type:: Technical Report
Full Text:: typical commercial resorcinol-resin adhesives cure at lower temperatures and the ultimate joint strength

Creator:: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Black, John M., and Rauch, A. H.
Abstract:: Information reviewed and reaffirmed August 1960.
Resource Type:: Technical Report
Full Text:: joint strength were taken as indicative of diverse curing characteristics. Curing and Testing

Creator:: Olson, W. Z., Bensend, Dwight W., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1955.
Resource Type:: Technical Report
Full Text:: -joint speci- mens with, 1/2-square-inch shear area. Test Procedures Fatigue-testing machines of the

Creator:: Eickner, Herbert W., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: Revised December 1946.
Resource Type:: Technical Report
Full Text:: humidity before testing, Results The average joint strengths and compreg failures for the four glues (S1

ScholarsArchive@OSU