Index Catalog // ScholarsArchive@OSU

Stresses in laminated wood construction

Creator:: Forest Products Laboratory (U.S.)
Resource Type:: Technical Report

The electrical resistivity of resin-treated wood (impreg and compreg), hydrolyzed-wood sheet (hydroxylin), and laminated resin-treated paper (papreg)

Creator:: Weatherwax, Richard C., Stamm, Alfred J. (Alfred Joaquim), 1897-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, March 1956. Original report published in 1943.
Resource Type:: Technical Report
Full Text:: , Structure, and Identification of Wood List of 'publications on Mechanical Properties and Structural Uses of

Properties of ordinary wood compared with plywood

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revision of earlier publication.
Resource Type:: Technical Report

Specific gravity-strength relations for wood

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revised April 1956. Original report published October 1941.
Resource Type:: Technical Report

Distribution of tension wood and its relation to longitudinal shrinkage in aspen

Creator:: Forest Products Laboratory (U.S.) and Terrell, Bessie Z.
Abstract:: Information reviewed and reaffirmed 1958. Original report dated February 1952.
Resource Type:: Technical Report
Full Text:: DISTRIBUTION Of TENSION WOOD AND ITS RELATION TO LONGITUDINAL

Wood properties that affect paint performance

Creator:: Forest Products Laboratory (U.S.) and Browne, F. L. (Frederick Lincoln), 1895-
Abstract:: Information reviewed and reaffirmed, June 1958.
Resource Type:: Technical Report
Full Text:: adherence to the wood, and remains clinging to the surface chiefly through mechanical anchorage in the

Nail-withdrawal resistance of American woods

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revision of earlier publication.
Resource Type:: Technical Report

Effect of rapid loading on the compressive and flexural strength of wood

Creator:: Forest Products Laboratory (U.S.) and Liska, J. A.
Resource Type:: Technical Report
Full Text:: STIPENGTIVI CIF WOOD June 1950 /1 No. NM UNITED STATES LPARTMENT OF AGRICULTURE LEOR ST SERVICE iFOREST

Strength tests of spliced studs

Creator:: Erickson, E. C. O. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1965. Original report dated September 1941.
Resource Type:: Technical Report

Wood structure as related to drying problems

Creator:: West, W. I. (William Irvin), 1916-, Western Dry Kiln Clubs, and Western Dry Kiln Clubs. Meeting (7th : 1955 : Klamath Falls, Or.)
Resource Type:: Conference Proceeding
Full Text:: Wood Structure as Related to Drying Problems By W. I. West, School

Fiber stresses for wood poles

Creator:: Wilson, T. R. C. (Thomas Randall Carson), 1884-, Drow, John T., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: EWER STRESSES FOR WOOD POLES March 1953 No. D1 C19 UNITED STATES

Strength of southern pine and Douglas-fir compared

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revision of earlier publication.
Resource Type:: Technical Report

Strength of western larch and its suitability for poles

Creator:: Forest Products Laboratory (U.S.) and Drow, John T.
Abstract:: Revised December 1952.
Resource Type:: Technical Report
Full Text:: softwoods. The lengths of the bars represent composite average values for each species and property

The effect of fire-retardant chemicals on glues used in plywood manufacture

Creator:: Forest Products Laboratory (U.S.) and Black, John M.
Abstract:: Information reviewed and reaffirmed, June 1958. Material was originally submitted in 1942 by the author as a thesis.
Resource Type:: Technical Report
Full Text:: Mechanical Properties and Structural Uses of Wood and Wood Products Partial list of publications for

Effect of pressure treatment with coal-tar creosote on the strength of Douglas-fir structural timbers

Creator:: Forest Products Laboratory (U.S.), Luxford, R. F. (Ronald Floyd), 1889-, and MacLean, J. D. (James Donald)
Resource Type:: Technical Report
Full Text:: structures of creosoted wood. Unfortunately, a conclusive answer cannot be given. The comprehensive investi

Effect of rapid loading and duration of stress on the strength properties of wood tested in compression and flexure

Creator:: Forest Products Laboratory (U.S.), Brokaw, M. P., and Foster, G. W.
Abstract:: Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report
Full Text:: .' !PROPERTIES Of WOOD TESTED IN COMPRESSION AND !FLEXURE Information Reviewed and Reaffirmed 14581 No. 1518

The perpendicular-to-grain mechanical properties of red oak as related to temperature, moisture content, and time

Creator:: Forest Products Laboratory (U.S.) and Youngs, R. L. (Robert Leland), 1924-
Resource Type:: Technical Report
Full Text:: OF WOOD 5 THE PERPENDICULAR-TO-GRAIN MECHANICAL PROPERTIES OF WOOD UNDER DRYING CONDITIONS

Relation of several formation variables to properties of phenolic-resin-bonded wood-waste hardboards

Creator:: Turner, Harold Dale, Kern, John D., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: FORMATION VARIABLES TO PROPERTIES Of PHENOLIC-RESIN-BONDED WOOD-WASTE HARDBOARDS November 1950

Relationship of specific gravity to moduli of rupture and elasticity in commercial hardboard, statistical supplement

Creator:: Hofstrand, A. D. (Arland Duane)
Resource Type:: Technical Report
Full Text:: scarcity of reliable information about relationships of mechanical properties to physical characteristics

Supplement to mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Creator:: Freas, Alan D'Yarmett, 1910-, Werren, Fred, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed July 1961. Original report published in February 1951.
Resource Type:: Technical Report
Full Text:: Supplement to MECHANICAL PROPERTIES CIF CROSS4AMINATED AND

Mechanical properties of plastic laminates

Creator:: Stevens, Gordon H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: MECHANICAL PINDPEPTIIES PLASTIC LAMINATES At'it No. 1820-1

Supplement to mechanical properties of plastic laminates

Creator:: Youngs, R. L. (Robert Leland), 1924- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: *TAT' s;VZ 0 APR 26 1957 • /S2.2O-C Supplement to MECHANICAL

Relation of several formation variables to properties of phenolic-resin-bonded wood-waste hardboards

Creator:: Turner, Harold Dale, Kern, John D., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: FORMATION VARIABLES TO PROPERTIES Of PHENOLIC-RESIN-BONDED WOOD-WASTE HARDBOARDS November 1950

Procedure for determining the properties and characteristics of pulpwood

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revised August 1955.
Resource Type:: Technical Report
Full Text:: IV 3 Physical tests of log sections I V 3 Chemical analysis of wood substance I VI 4 Testing

Thin-walled plywood cylinders in bending and torsion

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed January 1960.
Resource Type:: Technical Report
Full Text:: Information Reviewed and Reaffirmed January 1953 lommumum.,,m_ COPY Please return to: Wood Engineering

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed in 1965. Original report issued December 1959.
Resource Type:: Technical Report
Full Text:: Vecember 1959 No. 2171 LOAN COPY Please return to: Wood Engineering Research Forest Products Laboratory

Effect of tensile and compressive preloading on the tensile, compressive, and shear properties of a glass-fabric-base epoxy laminate

Creator:: Forest Products Laboratory (U.S.) and Kimball, Kenneth Edmund
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce
Resource Type:: Technical Report
Full Text:: the laminate. Introduction Knowledge of the effect of preloading on the mechanical properties of a

Comparative tests of white oak and douglas fir barrels

Creator:: Forest Products Laboratory (U.S.) and Wilson, T. R. C. (Thomas Randall Carson), 1884-
Abstract:: Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report
Full Text:: pores of the wood at th e chime . The first leak usually occurred wither between the staves and th e

Rate of temperature change in laminated timbers heated in air under controlled relative humidity conditions

Creator:: MacLean, J. D. (James Donald) and Forest Products Laboratory (U.S.)
Abstract:: Reviewed and reaffirmed July 1954.
Resource Type:: Technical Report
Full Text:: . In p revious studies of the rate of temperature change in wood , it has been found that the heating

Presence of tension wood in mahogany in relation to longitudinal shrinkage

Creator:: Forest Products Laboratory (U.S.) and Pillow, M. Y. (Maxon Young), 1899-1980
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: lumber and also whether this property was related to amounts of tension wood in the test specimens

How growth of white pine affects its properties for matches

Creator:: Pillow, M. Y. (Maxon Young), 1899-1980 and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: long recognized this and have given considerable attention to proper selection and grading of wood

Mechanical properties of some heat-resistant metal honeycomb cores

Creator:: Kuenzi, Edward W., Jahnke, W. E., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: [CULTURE ROOM /E#7..Z. MECHANICAL PROPERTIES CI SOME HEAT

Strength of wood beams of rectangular cross section as affected by span-depth ratio

Creator:: Bechtel, S. C. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, January 1959. Original report issued March 1952.
Resource Type:: Technical Report
Full Text:: . W15CON51N I STRENGTH OF WOOD BEAMS OF RECTANGULAR CROSS SECTION AS AFFECTED 13Y SPAN-DEPTH RATIO

Effect of certain fabricating variables on plastic laminates and plastic honeycomb sandwich construction

Creator:: Forest Products Laboratory (U.S.), Heebink, Bruce G., Werren, Fred, and Mohaupt, Alvin A.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: physical and mechanical properties of laminates to be used as facings for sandwich constructions. The

Stress-rupture tests of a glass-fabric-base plastic laminate

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1959. Original report issued June 1953.
Resource Type:: Technical Report
Full Text:: typical polyester- type laminate so that more basic knowledge of mechanical properties of glass-fabric

Effect of different catalysts and amounts of styrene monomer on strength and durability of glass-cloth plastic laminates

Creator:: Forest Products Laboratory (U.S.), Mohaupt, Alvin A., and Freas, Alan D'Yarmett, 1910-
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued March 1952.
Resource Type:: Technical Report
Full Text:: 1958 LOAN COPY Please return to: WOOD ENGINEERING RESEARCH FOREST PRODUCTS LABORATORY MADISON

Supplement to effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report
Full Text:: LOAN COPY Please return to: Wood Engineering Research Forest

Effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Werren, Fred
Abstract:: Information reviewed and reaffirmed April 1957
Resource Type:: Technical Report
Full Text:: LOAN COPY •April 1957 No. 1811 Please return to: Wood Engineering

Strength properties of plastic honeycomb core materials

Creator:: Kommers, William J. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956
Resource Type:: Technical Report
Full Text:: used for the testing of .wood specimens was not applicable to the testing . of honeycomb materials

Effect of phenolic resins on physical properties of kraft paper

Creator:: Forest Products Laboratory (U.S.), Baird, Parker K., Seidl, Robert J., and Fahey, Donald J.
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: fibers themselves. Dimensional Stability Paper, like wood, expands with increase in moisture content

Effect of extending hot-press, urea-resin glue with rye flour on strength and durability of the glue joints

Creator:: Forest Products Laboratory (U.S.) and Brouse, Don
Abstract:: Information reviewed and reaffirmed, September 1956.
Resource Type:: Technical Report
Full Text:: strength and 20 percent l -ower in wood fai lure than those specirnens glued with 10 percent extension

The bending strength and stiffness of plywood

Creator:: Freas, Alan D'Yarmett, 1910- and Forest Products Laboratory (U.S.)
Abstract:: Revised September 1956.
Resource Type:: Technical Report

Commercial liquid glues

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revision of earlier publication.
Resource Type:: Technical Report
Full Text:: , certain other characteristics are ddEired ia a ligaid glue. When spread upon wood eurfacee, it should

Supplement to effects of tensile preloading and water immersion on flexural properties of a polyester laminate

Creator:: Youngs, R. L. (Robert Leland), 1924- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: straight lines drawn to indicate the relationship to preload stress for each property after each weathering

Modulus of elasticity of wood determined by dynamic methods

Creator:: Bell, Earl Ross, Peck, Edward C. (Edward Coit), 1894-, Krueger, N. T., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: MODULUS OF ELASTICITY Of WOOD DETERMINED 13Y DYNAMIC METHODS April

Effect of prestressing on mechanical properties of douglas-fir and southern yellow pine

Creator:: Forest Products Laboratory (U.S.) and Wood, E. M. (Edward Manning), 1891-
Resource Type:: Technical Report
Full Text:: mechanical properties of the small specimens. In a broad sense, all wood is prestressed. Wind or other

Methods for conducting mechanical tests of sandwich construction at normal temperatures

Creator:: Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: .. ..................... 14 Strip Test 16 Report No. 1556, revised METHODS FOR CONDUCTING MECHANICAL TESTS OF

Survey of strength and related properties of yellow-poplar

Creator:: Luxford, R. F. (Ronald Floyd), 1889-, Wood, Lyman Wentsch, 1899-, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Revised June 1953.
Resource Type:: Technical Report
Full Text:: and Strength Properties bf Wood to ,its specific Gravityrt u. s. Dept. lgr. BuIl. No. 6?6r, taute I

The coefficients of thermal expansion of wood and wood products

Creator:: Weatherwax, Richard C., Stamm, Alfred J. (Alfred Joaquim), 1897-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, March 1956. Original report published in June 1946.
Resource Type:: Technical Report
Full Text:: , remains a basic property of all the derived structural products of wood, in which the fiber arrangement is

Mechanical properties of ponderosa pine from the Black Hills

Creator:: Forest Products Laboratory (U.S.), Drow, John T., Dohr, Alfred W., and Bellosillo, Simplicio B.
Resource Type:: Technical Report
Full Text:: '.''CULTURE ROOM MECHANICAL PROPERTIES Of PONDEROSA PINE mom THE

Search Constraints

Search Results

Limit your search