Index Catalog // ScholarsArchive@OSU

Durability of glued wood to metal joints

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed October 1954.
Resource Type:: Technical Report
Full Text:: -joint area at the end of the 1- by 2-inch pieces into which they were subsequently cut. Glue B was

A comparison of shearing strengths of glued joints at various grain directions as determined by four methods of test

Creator:: Forest Products Laboratory (U.S.), McLeod, A. M., Yolton, L. A., Sanborn, W. A., and Phillips, R. S.
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: : 1. Standard shear test for wood, according to the American Society fo r Testing Materials, Serial

General survey of data on the reliability of metal-bonding adhesive processes

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: variability of lap-joint strength data from tests for adhesive acceptance, laboratory control, adhesive

Results of accelerated tests and long-term exposures on glue joints in laminated beams

Creator:: Truax, T. R. (Thomas Roy), 1886-, Selbo, M. L. (Magnus Leonard), 1901-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: years some form of joint test has been the common and generally accepted method of testing most glues

Plastic flow throughout volume of thin adhesive bonds

Creator:: Forest Products Laboratory (U.S.) and Norris, Charles, B. (Charles Brazer), 1894-
Resource Type:: Technical Report
Full Text:: the restraint of the strains in the adhesive to the presence of the adherends. If a butt joint is

Adhesives for bonding wood to metal

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Blomquist, Richard Frederick, 1912-
Resource Type:: Technical Report
Full Text:: adhesive, Similar exposure tests were also made on bonded lap-joint specimens of birch and metal that had

A study of methods for preparing clad 24S-T3 aluminum-alloy sheet surfaces for adhesive bonding

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Schowalter, W. E.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: bonding into lap-joint specimens with four adhesive bonding processes A, B, C, and D. The cleaning methods

Rate of development of joint strength by four resin glues on eight species of wood

Creator:: Olson, W. Z., Bruce, H. D., Soper, V. R., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: glue line. After wetting, the specimens were tested at once in a standard plywood-joint- testing

Strength of joints in hard maple blocks, glued with certain resin glues, after various open and closed assembly periods

Creator:: Olson, W. Z., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed July 1955.
Resource Type:: Technical Report
Full Text:: of the assembly period and tempera- ture on the joint strength. Nine glues, designated by letters in

Stresses in a lap joint with elastic adhesive

Creator:: Sherrer, R. E. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction for Aircraft of the departments of the Air Force, Navy, and Commerce
Resource Type:: Technical Report
Full Text:: STRESSES IN A LAP JOINT WITH ELASTIC ADHESIVE !— By R. E. SHERRER, Engineer Forest Products Laboratory

ScholarsArchive@OSU

Durability of glued wood to metal joints

A comparison of shearing strengths of glued joints at various grain directions as determined by four methods of test

General survey of data on the reliability of metal-bonding adhesive processes

Results of accelerated tests and long-term exposures on glue joints in laminated beams

Plastic flow throughout volume of thin adhesive bonds

Adhesives for bonding wood to metal

A study of methods for preparing clad 24S-T3 aluminum-alloy sheet surfaces for adhesive bonding

Rate of development of joint strength by four resin glues on eight species of wood

Strength of joints in hard maple blocks, glued with certain resin glues, after various open and closed assembly periods

Stresses in a lap joint with elastic adhesive

Limit your search

Academic Affiliation

Advisor

Commencement Year

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search