Index Catalog // ScholarsArchive@OSU

Thin-walled plywood cylinders in bending

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of Aeronautical Board. Information reviewed and reaffirmed 1962. First issued February 1944.
Resource Type:: Technical Report
Full Text:: WIN-WALLED PLYWOOD CYLINDERS IN LENDING February 1944 INC4414MA

Approximate methods of calculating the strength of plywood

Creator:: Forest Products Laboratory (U.S.), Markwardt, L. J. (Lorraine Joseph), 1889-, and Freas, Alan D'Yarmett, 1910-
Abstract:: Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: properties result from the method of construction of plywood , the mechanical properties are complicated not

Buckling of flat plywood plates in compression, shear, or combined compression and shear

Creator:: Forest Products Laboratory (U.S.) and March, H. W.
Abstract:: Information reviewed and reaffirmed 1962. Original report published April 1942.
Resource Type:: Technical Report
Full Text:: PLYWOOD PLATES IN COMPRESSION, SHEAR, OR COMBINED COMPRESSION AND SHEAR! By ' H. W. MARCH, a Head

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of flat isotropic plates in compression, shear, or combined compression and shear

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated September 1942.
Resource Type:: Technical Report
Full Text:: . ts are pre- eented in the sarne form as those for plywood even though, because of syrnmet"y, lhis

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of plates of any symmetrical construction. Edges simply supported. Buckling of plates with two edges clamped.

Creator:: March, H. W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Original report published 1942.
Resource Type:: Technical Report
Full Text:: Products Laboratory Report No. 1316, rrBuckling of Flat Plywood Platee in Corn- pression, Shear, or

Methods of calculating the strength and modulus of elasticity of plywood in compression

Creator:: Liska, J. A. and Forest Products Laboratory (U.S.)
Abstract:: Revised September 1955. Information reviewed and reaffirmed 1960.
Resource Type:: Technical Report
Full Text:: . OF PLYWOOD IN COMIPPESSION Revised September 1955 INFORMATION REVIEWED AN REAFFIRMED 1960 No

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : plates having the grain of the face plies inclined to the edges

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Report originally issued in 1943.
Resource Type:: Technical Report
Full Text:: Supplemont to , BUCKIING Or rlAT plyWOOD PIATIS lN CO,ftpptSSION

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, September 1961. Original report dated October 1943.
Resource Type:: Technical Report
Full Text:: Thle report presente the resulte of corrpreeelon teste of thin plywood plates at 0" and 90" to the face

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of flat plywood plates in compression with face grain at 0 degrees and 90 degrees to load

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1962. Original dated June 1943.
Resource Type:: Technical Report
Full Text:: iaboratbry Mirneo. No. lB16; i lBuckLlng of Flat Plywood Plates ln Cornpression, Shlar or Combined

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of flat plywood plates in uniform shear with face grain at angled of 0 degrees, +45 degrees, and 90 degrees

Creator:: Voss, Arnold W., Norris, Charles, B. (Charles Brazer), 1894-, Palma, Joseph, and Forest Products Laboratory (U.S.)
Abstract:: Revised July 1950. Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: Supplemont to BUCKIING Ot flAT plywooD pliTts tN coilpRrsstoN, sHfAR

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : Buckling tests of flat plywood plates in compression with face grain 45 degrees to load -- Loaded edges clamped, others simply supported

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Original report published in 1949.
Resource Type:: Technical Report
Full Text:: BUCKLING OF FLAT PLYWOOD PLATES IN COMPRESSION, SHEAR, OR COMBINED COMPRESSION AND SHEAR1 Buckl ing Tests

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : effective width of thin plywood plates at maximum load in compression with the face grain at 0°, 15°, 30°, 45°, 60°, 75°, and 90° to load

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Original report issued March 1945.
Resource Type:: Technical Report
Full Text:: Supplement to DUCKLING OF FEAT PLYWOOD PLATES IN COMPRESSION

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling tests of flat plywood plates in compression with face grain at 15°, 30°, 45°, 60°, and 75° to load

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated November 1943. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: Products Laboratory Madison, Wisconsin 53705 Supplement to 13IJCICLING or FLAT PLYWOOD PLATES IN

Supplement to buckling of flat plywood plates in compression, shear, or combined compression and shear : buckling of long, flat plywood plates under uniform shear. Grain of face plies inclined to edges. Edges clamped

Creator:: March, H. W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962. Date of original report October 1943.
Resource Type:: Technical Report
Full Text:: Supplement to 13UCELINC or FLAT PLYWOOD PLATES IN COMPRESSION

A comparison of the buckling strength of thin-walled cylindrical and barrel-shaped plywood shells

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed, 1962. Original report dated June 1943. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: CYLINDRICAL AND BARREL.-SIAPIEID PLYWOOD WILLS June 1943 Wood Engineering Research itifekik Forest

Effect of elliptic or circular holes on the stress distribution in plates of wood or plywood considered as orthotropic materials

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Originally prepared in 1944. Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: PLATES Of WOOD OR !PLYWOOD CONSIDERED AS ORTHOTROPIC MATERIALS Intermatien-Pci4etued-aittl

Supplement to compression, tension, and shear tests on yellowpoplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : compression tests

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Publication restriction has been removed. Information reviewed and reaffirmed, 1962. Original report dated November 1943. This report is one of a series issued in Cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: - poplar plywood, wherein the angle between the face grain and the applied stress varied from 0 0 to 90 0

Effects of moisture on bacterial weakening of casein-bonded plywood

Creator:: Forest Products Laboratory (U.S.) and Duncan, Catherine G.
Abstract:: Information reviewed and reaffirmed 1963. Original report published April 1957.
Resource Type:: Technical Report
Full Text:: PLYWOOD No. 2077 April 1957 INFORMATION REVIEWED AND REAFFIRMED 1963 PO FILE COPY 113 1:31 REMOVE

Plastic flow (creep) properties of two yellow birch plywood plates under constant shear stress

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kommers, William J., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, October 1960. Original report dated October 1943.
Resource Type:: Technical Report
Full Text:: of Wisconsin PLASTIC FLOW (CREEP) PROPERTIES OF TWO YELLOW BIRCH PLYWOOD PLATES UNDER CONSTANT

Elastic stability of the facings of flat sandwich panels when subjected to combined edgewise stresses

Creator:: Forest Products Laboratory (U.S.), Boller, Kenneth H., and Norris, Charles, B. (Charles Brazer), 1894-
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed August 1955 and 1960. Original report dated February 1949.
Resource Type:: Technical Report
Full Text:: procedures given in "Methods for Conducting Mechanical Tests of Sandwich Constructions at Normal Temperatures

Properties of insulating fiberboard sheathing

Creator:: Luxford, R. F. (Ronald Floyd), 1889- and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated April 1955.
Resource Type:: Technical Report

Vegetable (starch) glues

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed.
Resource Type:: Technical Report
Full Text:: January 1960 No. 30 I Vegetable glues are used in woodworking mainly for making plywood an d other

Stability of a few curved panels subjected to shear

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated May 1947.
Resource Type:: Technical Report
Full Text:: on the extension of the theory for plywood to the sandwich type of construction. The results of the

Preliminary study of the factors affecting tensile strength of structural lumber

Creator:: Forest Products Laboratory (U.S.) and Zehrt, W. H.
Resource Type:: Technical Report
Full Text:: specimens were loaded in a mechanical testing machine with load applied through wedge grips 12 inches long

Mechanical properties of Coulter pine from California

Creator:: Forest Products Laboratory (U.S.) and Dohr, Alfred W.
Abstract:: Information reviewed and reaffirmed 1965. Original report issued January 1958.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES OF COULTER PINE FROM CALIFORNIA No. 2102

Factors affecting strength and design principles of glued laminated construction

Creator:: Forest Products Laboratory (U.S.) and Freas, Alan D'Yarmett, 1910-
Abstract:: Information reviewed and reaffirmed October 1962. Original report dated August 1956.
Resource Type:: Technical Report
Full Text:: property. Since the effect of drying is not the same for all species nor for all pieces within a species

Mechanical properties of engelmann spruce

Creator:: Forest Products Laboratory (U.S.) and Drow, John T.
Resource Type:: Technical Report
Full Text:: 4 SDi/33 111EA MECHANICAL PROPERTIES OF ENGELMANN SPRUCE By

Interlaminar properties of five plastic laminates

Creator:: Kimball, Kenneth Edmund and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: the Mechanical Properties of Glass- Fabric-Base Plastic Laminates. U.S. Forest Prod. Lab. Rept. No

Mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.), Freas, Alan D'Yarmett, 1910-, and Werren, Fred
Abstract:: Information reviewed and reaffirmed 1959. Original report published March 1953.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES Of CROSS-LAMINATED ANC, COMPOSITE GLASS

Supplement to mechanical properties of plastic laminates

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued September 1955.
Resource Type:: Technical Report
Full Text:: Supplement to Mechanical Properties of Plastic Laminates

Supplement to mechanical properties of plastic laminates

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated 1953.
Resource Type:: Technical Report
Full Text:: Supplement to MECHANICAL PROPERTIES OF PLASTIC LAMINATES

Mechanical properties of plastic laminates

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed September 1958 and 1965.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES OF PLASTIC LAMINATES Information Reviewed

Summary on growth in relation to quality of southern yellow pine

Creator:: Paul, Benson H., Smith, Diana M., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1956 and 1963.
Resource Type:: Technical Report
Full Text:: pine, namely, loblolly, longleaf, shortleaf, and slash. The summary is based on mechanical tests of

Effect of size and shape of specimen on the tensile strength of fiberboards

Creator:: Forest Products Laboratory (U.S.) and Lewis, Wayne C., 1914-
Abstract:: Information reviewed and reaffirmed 1960.
Resource Type:: Technical Report
Full Text:: specimens with the intent of arriving at a recommended standard specimen for this strength property. One

Some properties of California white oak and Oregon white oak

Creator:: Forest Products Laboratory (U.S.), Paul, Benson H., Dohr, Alfred W., and Drow, John T.
Abstract:: Information reviewed and reaffirmed 1965. Original report dated October 1958.
Resource Type:: Technical Report
Full Text:: for a limited number of mechanical tests, including static bending, hardness, and toughness. The

Relationship between thickness and mechanical properties of several glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Kimball, Kenneth Edmund
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: and property should be considered individually. Introduction The mechanical properties of glass

Effect of long-term loading on glass-reinforced plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed 1965. Revised September 1958.
Resource Type:: Technical Report
Full Text:: mechanical test was designed to apply the load with weights and a lever system. The design of the loading

Mechanical properties of several honeycomb cores

Creator:: Stevens, Gordon H., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: SERVICE MADISON S. WISCONSIN n Cooperation with the University of Wisconsin MECHANICAL PROPERTIES OF

Effect of thickness on the mechanical properties of glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Youngs, R. L. (Robert Leland), 1924-
Resource Type:: Technical Report
Full Text:: !CULTURE ROOM EFFECT 01 THICKNESS ON THE MECHANICAL PROPERTIES Of

Effect of ten repetitions of stress on the bending and compressive strengths of Sitka spruce and Douglas-fir

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, July 1960. Original report dated April 1943.
Resource Type:: Technical Report
Full Text:: determine the effects of reversed and repeated stress on the strength properties of wood and plywood

Properties of some bamboos cultivated in the western hemisphere

Creator:: Forest Products Laboratory (U.S.) and Heck, George Emil, 1888-
Abstract:: Information reviewed and reaffirmed March 1956 and 1962.
Resource Type:: Technical Report
Full Text:: : 164-167, illus. (6) MEYER, H. F., and EKLUND, B. 1923. Tests on the Mechanical Properties of Bamboo

Characteristics of some imported woods

Creator:: Forest Products Laboratory (U.S.) and Kukachka, B. Francis (Bohumil Francis), 1915-
Resource Type:: Technical Report
Full Text:: . Department of Agriculture OPP Abstract The gross features, shrinkage, mechanical properties and uses of 91

Method for determining tensile properties of paper

Creator:: Forest Products Laboratory (U.S.), Setterholm, Vance C., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed 1962. Original report issued December 1956.
Resource Type:: Technical Report
Full Text:: -overlaid lumber and plywood for both exterior and interior uses, paper honeycomb cores for sandwich, and

Insulating board and hardboard from four common hardwoods of northeastern farm woodlots

Creator:: Schwartz, Sidney L. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1960.
Resource Type:: Technical Report
Full Text:: hardboards were slightly to moderately deficient, respectively, in this property. Using unbeaten Defibrator

The effect of a change in testing speed and span on the flexural strength of insulating and structural fiberboards and a proposed new method of test

Creator:: Youngquist, W. G., Munthe, Bert P., and Forest Products Laboratory (U.S.)
Abstract:: Original report published in 1948. Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: obtained in tests made in accordance with present specifications for tests of wood and plywood. A proposed

Some tests of end-matched lumber

Creator:: Wilson, T. R. C. (Thomas Randall Carson), 1884- and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: Mechanical Properties and Structural Uses of Wood and Wood Products Partial list of publications for

Mechanical properties of laminated modified wood

Creator:: Forest Products Laboratory (U.S.) and Erickson, E. C. O.
Abstract:: Information reviewed and reaffirmed 1965. Revised 1952. Original report dated May 1947.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES CI LAMINATED MODIFIED WOOD Information

Effect of condition and kind of wood on groundwood pulp quality

Creator:: Forest Products Laboratory (U.S.) and Schafer, Earl R.
Resource Type:: Technical Report
Full Text:: an especially important property when wood is purchased by volume for pulping, since it influences

Physical, mechanical, and other properties of five Hawaiian woods

Creator:: Forest Products Laboratory (U.S.) and Youngs, R. L. (Robert Leland), 1924-
Resource Type:: Technical Report
Full Text:: PHYSICAL MECHANICAL AND OTHER PROPERTIES OF FIVE HAWAIIAN WOODS By ROBERT L. YOUNGS, Technologist Forest

Stiffness and bending strength of beams laminated from two species of wood

Creator:: Forest Products Laboratory (U.S.) and Ethington, Robert L.
Resource Type:: Technical Report
Full Text:: certain mechanical properties of the species. Two-species beams were fabricated and tested to provide a

Search Constraints

Search Results

Limit your search