Index Catalog // ScholarsArchive@OSU

Creator:: Erickson, E. C. O., Norris, Charles, B. (Charles Brazer), 1894-, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued November 1955.
Resource Type:: Technical Report
Full Text:: presented. This analysis pro- vides a theoretical means of determining the mechanical properties at any

Creator:: Forest Products Laboratory (U.S.) and Freas, Alan D'Yarmett, 1910-
Abstract:: Information reviewed and reaffirmed October 1962. Original report dated August 1956.
Resource Type:: Technical Report
Full Text:: , laminated from clear material and under long-time service at maximum design load and under wet conditions

Creator:: Kimball, Kenneth Edmund and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: measured 18 inches in the warp direction and 12 inches wide. Because of a lack of material thick enough to

Creator:: Forest Products Laboratory (U.S.), Freas, Alan D'Yarmett, 1910-, and Werren, Fred
Abstract:: Information reviewed and reaffirmed 1959. Original report published March 1953.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES Of CROSS-LAMINATED ANC, COMPOSITE GLASS

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued September 1955.
Resource Type:: Technical Report
Full Text:: Material Two parallel-laminated panels, each 1/8-inch thick and about 38 inches square, were received at

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated 1953.
Resource Type:: Technical Report
Full Text:: Supplement to MECHANICAL PROPERTIES OF PLASTIC LAMINATES

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed September 1958 and 1965.
Resource Type:: Technical Report
Full Text:: , "Mechanical Properties of Cross- Laminated and Composite Glass-Fabric-Base Plastic Laminates." February 1951

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1965. Original report issued June 1957.
Resource Type:: Technical Report
Full Text:: characteristics of the material tested for this report at 0° to the warp are similar to that reported in Forest

Creator:: Forest Products Laboratory (U.S.) and Werren, Fred
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed July 1955 and 1960.
Resource Type:: Technical Report
Full Text:: knowledge of the mechanical properties of the material when subjected to bending. Specifications- that

Creator:: Forest Products Laboratory (U.S.), Meyer, H. R., and Erickson, E. C. O.
Abstract:: Information reviewed and reaffirmed March 1956 and 1962. Original report published 1945.
Resource Type:: Technical Report
Full Text:: 50 percent relative hu- midity. Test material consisted of both parallel-laminated and cross-lami

ScholarsArchive@OSU