Published June 1966. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
A survey of the methods of purification of KC1, for use in
preparing single crystals by growth from the melt, was made. Two
methods, fractional recrystallization and ion exchange, were used.
The purity of the salt and crystals grown from the same salt were
compared with the findings of other...
Vanadium pentoxide single crystals were grown from the melt.
These crystals were made the cathode in an electrolytic cell and the
polarization and recovery of the electrode were studied under a
variety of experimental conditions.
A study of the electrode potential versus that of the standard
hydrogen electrode as a...
Published May 1968. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
The drift velocity of electrons in pure hydrogen, in pure deuterium, and in mixtures thereof, has been observed at low pressures using the following pulse technique for these gases for the first time. Plane parallel electrodes of a known separation and immersed in the gas to be studied are connected...
The purposes of this investigation were twofold:
1. To determine important criteria for making a selection of
course content in general biology.
2. To ascertain what should be the content emphasis in
biology for the purposes of general education at the freshman
college level.
The literature pertinent to the problem...
Research on the application of soluble, metal chelates for
water tracing using thermal neutron activation analysis for tracer
determination has led to the development of several tracers with
promising solution stabilities (conservative behavior) and determination sensitivities. The solution stabilities of the ethylenediamine
tetraacetic acid (EDTA) and the diethylenetriamine pentaacetic acid...
Solid solution alloying was employed in an attempt to produce some
relatively ductile form of beryllium. If the c/a ratio could be significantly
altered, it was felt new or different slip systems could be activated. The
following elements were selected on the basis of atomic size, melting point,
crystal structure...