Index Catalog // ScholarsArchive@OSU

The effect of veneer thickness and grain direction on the shear strength of plywood

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Werren, Fred, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed July 1961. Original report published July 1948.
Resource Type:: Technical Report
Full Text:: LABORATORY GRAIN OF DIRECTION STRENGTH ON PLYWOOD TEE SHEAR STRENGTH OREGON STATE UNIVERSITY

Approximate methods of calculating the strength of plywood

Creator:: Forest Products Laboratory (U.S.), Markwardt, L. J. (Lorraine Joseph), 1889-, and Freas, Alan D'Yarmett, 1910-
Abstract:: Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: . S . Department of Agriculture Plywood is defined as a combination of three or more layers of veneer

Plastic flow (creep) properties of two yellow birch plywood plates under constant shear stress

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kommers, William J., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, October 1960. Original report dated October 1943.
Resource Type:: Technical Report
Full Text:: of Wisconsin PLASTIC FLOW (CREEP) PROPERTIES OF TWO YELLOW BIRCH PLYWOOD PLATES UNDER CONSTANT

The fatigue behavior of wood and plywood subjected to repeated and reversed bending stresses

Creator:: Kommers, William J. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, 1960. Original report dated 1943.
Resource Type:: Technical Report
Full Text:: properties of wood and plywood„'in con- nection with the current testing program concerning these materials

Supplement to the fatigue behavior of wood and plywood subjected to repeated and reversed bending stresses : the fatigue behavior of Douglas-fir and Sitka spruce subjected to reversed stresses superimposed on steady stresses

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, July 1960. Original report dated May 1944.
Resource Type:: Technical Report
Full Text:: FATIGUE ERIAVIC WCC AND PLYWOOD SUBJECTED to Reversed Stresses Superimposed on Steady Stresses

Bleed-through of glue in aircraft plywood

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1960. Original report dated November 1944.
Resource Type:: Technical Report
Full Text:: BLEED-THROUGH OF CLUE IN AIRCRAFT PLYWOOD Information Reviewed

Torsional buckling of longitudinally stiffened, thin-walled, plywood cylinders

Creator:: Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Norris, Charles, B. (Charles Brazer), 1894-
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued January 1948.
Resource Type:: Technical Report
Full Text:: , !PLYWOOD CYLINDERS jaattarrms--- Me+ek--44k56 INFORMATION REVIEWED AND REAFFIRMED 1962 This Report is

Supplement to compression, tension, and shear tests on yellow-poplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : tension tests

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, 1962. Original report published 1945.
Resource Type:: Technical Report
Full Text:: Agriculture OM MO INN Saimaa This supplement presents the results of 751 tension tests made on plywood of

Buckling of thin, curved, plywood plates in axial compression

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1960.
Resource Type:: Technical Report
Full Text:: IBIJCIKLING Of CUM, 'PLYWOOD PLATES IN AXIAL COMPRESSION

Effect of thickness of plywood reinforcing plates on the behavior of solid wood aircraft spars under changes in moisture content

Creator:: Forest Products Laboratory (U.S.) and Sanborn, W. A.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued April 1945.
Resource Type:: Technical Report
Full Text:: University of Wisconsin ON TH.E BEHAVIOR CF S0LID, WOO ID AIRCR4E' :SPARS EFFECT OF THICKNESS OF PLYWOOD

ScholarsArchive@OSU

The effect of veneer thickness and grain direction on the shear strength of plywood

Approximate methods of calculating the strength of plywood

Plastic flow (creep) properties of two yellow birch plywood plates under constant shear stress

The fatigue behavior of wood and plywood subjected to repeated and reversed bending stresses

Supplement to the fatigue behavior of wood and plywood subjected to repeated and reversed bending stresses : the fatigue behavior of Douglas-fir and Sitka spruce subjected to reversed stresses superimposed on steady stresses

Bleed-through of glue in aircraft plywood

Torsional buckling of longitudinally stiffened, thin-walled, plywood cylinders

Supplement to compression, tension, and shear tests on yellow-poplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : tension tests

Buckling of thin, curved, plywood plates in axial compression

Effect of thickness of plywood reinforcing plates on the behavior of solid wood aircraft spars under changes in moisture content

Limit your search

Academic Affiliation

Commencement Year

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search