Index Catalog // ScholarsArchive@OSU

Development and design of veneer scarfing machinery

Creator:: Pearl, John Joseph
Resource Type:: Masters Thesis
Full Text:: Development and design of veneer scarfing machinery DÍ

Heat and mass transfer rates associated with the drying of Southern pine and Douglas fir veneer in air and in steam at various temperatures and angles of impingement

Creator:: Laity, Walter William
Abstract:: Southern pine and Douglas fir veneer samples were dried in air under the following conditions: air temperatures were 350, 600, and 750°F; air velocities were 50, 100, and 150 feet per second, and angles of impingement of air against the veneer surfaces were 0°, 45°, and 90°. The resulting drying...
Resource Type:: Masters Thesis
Full Text:: ) Title: Heat and Mass Transfer Rates Associated with the Drying of Southern Pine and Douglas Fir Veneer

Effect of peeling temperatures on Douglas fir veneer

Creator:: Corder, Stanley E., Atherton, George H., and Oregon State University. Forest Research Laboratory
Resource Type:: Technical Report
Full Text:: facilities and personnel a t73 SUMMARY To study the effect of heating logs on quality of veneer recovered

Outdoor exposure of container-grade paper-overlaid veneers

Creator:: Forest Products Laboratory (U.S.) and Mohaupt, Alvin A.
Abstract:: Information reviewed and reaffirmed 1965. Original report dated August 1959.
Resource Type:: Technical Report
Full Text:: variations between the panel materials used, some of which included several veneer and paper combinations

A graphic method of estimating veneer drying rates

Creator:: Forest Products Laboratory (U.S.) and Fleischer, Herbert O.
Abstract:: Information reviewed and reaffirmed 1963. Original report issued April 1958.
Resource Type:: Technical Report
Full Text:: , therefore, rests largely upon the personal judgment and experience of the operator.. Most veneer is dried

The manufacture of veneer

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revised June 1962.
Resource Type:: Technical Report
Full Text:: . - Abstract Veneer and the methods commonly used to cut and dry it are described . The veneer industry and

Heat and mass transfer rates associated with the drying of plywood veneer using superheated steam at various angles of impingement

Creator:: South, Veeder, III
Resource Type:: Masters Thesis
Full Text:: IMPINGEMENT Abstract approved:____ James R. Weltr Southern pine and Douglas fir sapwood veneer were dried

Effects of tension wood in hardwood lumber and veneer

Creator:: Forest Products Laboratory (U.S.) and Pillow, M. L. (Magnus Leonard), 1901-
Abstract:: Original report dated April 1953. Information reviewed and reaffirmed July 1962.
Resource Type:: Technical Report
Full Text:: W) o EFFECTS Of TENSION WOOD IN HARDWOOD ILUMI3ER AND VENEER

Drying rates of Douglas fir veneer in superheated steam

Creator:: Atherton, George H. (George Harry), 1920-1987
Resource Type:: Masters Thesis
Full Text:: 3. Superheater, burner, blower, and orifice piping 24 4. Test station 24 5. Veneer samples in

Mandrel bending tests for aircraft veneer

Creator:: Forest Products Laboratory (U.S.) and Pillow, M. Y. (Maxon Young), 1899-1980
Abstract:: Information reviewed and reaffirmed March 1956 and 1962.
Resource Type:: Technical Report
Full Text:: steep slopes of grain from planes of sheets of veneer because of their serious effects on strength and

ScholarsArchive@OSU

Development and design of veneer scarfing machinery

Heat and mass transfer rates associated with the drying of Southern pine and Douglas fir veneer in air and in steam at various temperatures and angles of impingement

Effect of peeling temperatures on Douglas fir veneer

Outdoor exposure of container-grade paper-overlaid veneers

A graphic method of estimating veneer drying rates

The manufacture of veneer

Heat and mass transfer rates associated with the drying of plywood veneer using superheated steam at various angles of impingement

Effects of tension wood in hardwood lumber and veneer

Drying rates of Douglas fir veneer in superheated steam

Mandrel bending tests for aircraft veneer

Limit your search

Academic Affiliation

Advisor

Commencement Year

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search