The purpose of this thesis is to investigate the necessity of
transposition in the construction of overhead transmission lines.
Line currents, line voltages and line losses of both the transposed
and untransposed lines were calculated and compared for two different
voltage classes. The conventional method of symmetrical components
was used...
The question of the suitability of Walsh functions or
similar bi-valued functions used as a radar electromagnetic
carrier waveform is considered. Walsh functions are
described and effective sinusoidal steady state transfer
functions are defined for transmission elements, antenna
systems, and propagation media.
The argument is made that the unit impulse...
The power spectral density of the acoustic signature of
Dungeness crab was calculated by the use of digital computer.
The signal produced by the Dungeness crab was an analog signal.
Therefore a conversion of the signal from analog to digital was
necessary. This was done by sampling the acoustic signature...
CP1100/GPIB Interface is an interface between the "General
Purpose Interface Bus", which is an implementation of the Universal
Bus described in IEEE Standard 488-1975, and Unibus. This interface
enables TEKTRONIX CP1100 series controllers to operate
GPIB- compatible instruments connected to the General Purpose
Interface Bus. The designer can now incorporate...
The order of the practical system (e.g. nuclear power
plants, electrical power network and chemical plant) is
quite large. However, there are many limitations in computing
facilities for the large system. Because of these
limitations, it is often necessary to reduce the order of
the large system using an approximation....
REGTRAN (REGister TRANsfer), a hardware description
language and SYSSIM (SYStems SIMulation), a simulator for the
system described by REGTRAN were originally developed by Edward
Pett, Jr [33] at the University of Texas at Austin. These two programs
are successfully used to simulate many digital systems of
complex nature. It is...
The purpose of this study is to investigate radiation
losses in microstrip circuits. Expressions are derived to
evaluate the radiation resistances (or conductances) for
single terminated, open and short-circuited lines. The
quality factor Q of open and short-circuited stubs is
evaluated. An analytical procedure is formulated to
evaluate the radiation...
This paper investigates the benefit of various parallel processing
architectures for a Command and Control system for the Royal
Thai Air Force. Parallel processing has been shown to be useful
for air defense and air traffic control applications. Its advantages
are examined within the constraint imposed by the available
resources...
Most technological problems associated with man-machine conversations
have been solved and are well documented in both the
contemporary technical and lay literature. The major remaining
technological problem is the real time conversion of a human's vocal
uterances into a "written" phoneme sequence representing the information
content of speech. The work...
It has been established that bilinear models
occur frequently in nature and offer some important
advantages from the standpoint. of controllability,
optimization and modeling. The estimation of
bilinear systeim models from the Measurements
of input-output data are discussed. In the
first approach a parametric model of a discrete-time
linear system...
The purpose of this research is to develop methods to
translate a certain machine independent intermediate
language (IML) to efficient horizontal microprograms for a
class of microprogrammable machines. This IML has been
developed by Malik (12) and is compiled directly from a
high level microprogramming language used to implement a...
Bilinear systems due to their variable structure properties
offer more versatility in modelling of nonlinear processes than
linear systems.
The state estimation problem for a continuous bilinear system
with a continuous observation model is studied and the results are
extended to the case where the observations are of a discrete...
A variational integral method in the Fourier transform domain is
used to calculate the characteristic normal mode parameters of a coupled
pair of nonsymmetrical microstrip transmission lines in an inhomogenous
dielectric medium under quasi-TEM conditions. These together with the
theory of such structures are used to show that ideal directional...
An important step in the design of digital networks lies in the derivation of the switching formulas which describe the combinational logic networks in the system. In most large systems the number of gates and the number of connections are major factors that affect the cost of the system. An...
With the advent of LSI, iterative forms of realization
of digital systems are becoming increasingly popular with
system designers. Many problems occurring in digital computer
design render themselves suitable for iterative
realization. These include adders, arithmetic logic units,
coding and decoding circuits and so on. Fault-free functioning
of such systems...
A liquid crystal thermographic technique was developed
for application to several problems in clinical
medicine and physiology. The procedure was inexpensive,
rapid, simple, versatile and acceptable to patients.
Investigators in the past have used cholesteric liquid
crystals for thermography but their use was limited to
research in the medical field...
The feasibility of using the Franz-Keldysh effect in practical
light intensity controlling devices was investigated.
Reverse-biased diodes made from CdS were implemented to obtain
high electric fields necessary for the effect. The three types of
diodes studies were: MIS, metal-semiconductor barrier, and p⁺-n
heterojunction. An expression for the change in...
The objective of this thesis is to develop criteria for a data
acquisition system for electrical machinery capable of sampling a
signal every 0.2 msec with a desired accuracy of 0.1%. The system to
be measured includes both AC and DC voltage and current signals from
several points. The main...