Index Catalog // ScholarsArchive@OSU

Model and procedure for determination of strength and stiffness of wood studs

Creator:: Fernandez, Virgilio Asuncion
Abstract:: Elasticity properties of wood studs are essential inputs for the structural analysis of wood-stud wall systems. A theoretical procedure was developed to determine the probability distributions for the deflection-load relations of stud samples. The procedure is based on the finite element analysis and a Monte- Carlo type simulation and accounts...
Resource Type:: Dissertation
Full Text:: AND PROCEDURE FOR DETERMINATION OF STRENGTH AND STIFFNESS OF WOOD $TUDS Abstract approved

The effect of wood density on the kraft pulping properties of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco)

Creator:: Promachotikool, Montree
Abstract:: Three samples of different wood densities of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) were cooked by the kraft process. The yields and the Kappa numbers were studied to establish the rates and the energies of activation of the pulping and delignification reactions respectively. Wood properties did not show significant effects on...
Resource Type:: Masters Thesis

Wood and bark residues in Oregon : trends in their use

Creator:: Corder, Stanley E., Oregon State University. Forest Research Laboratory, Scroggins, T. L., Meade, W. E., and Everson, G. D.
Abstract:: The forest-products industries are most important to the state of Oregon. Oregon leads the nation in the production of plywood, lumber, and particle board. More than half of softwood plywood production in the United States came from Oregon at the time of this survey, and more than a fifth of...
Resource Type:: Technical Report
Full Text:: 1) sy REPLACE EN"i /j Wood and Bark Residues in Oregon

Flexural tests of large glued-laminated beams made from visually graded hem-fir lumber

Creator:: Johnson, James W. and Oregon State University. Forest Research Laboratory
Abstract:: Fifteen large glued-laminated beams made from visually graded hem-fir lumber were designed, fabricated, and tested to failure in static bending. When tested, the beams had an average moisture content of 7.5 percent. The beams were 40 feet long, 5 1/8 inches wide and 24 inches deep. Before laminating, individual pieces...
Resource Type:: Technical Report
Full Text:: . . . . . . . . . . . . . . . . . . . . . . 2 Manufacure of beams . . . . . . . . . . . . . . . . . . . . 2 Testing

Mill and woods residues tributary to Eugene, Oregon available for steam generation

Creator:: McMahon, Robert Ormond and Oregon State University. Forest Research Laboratory
Resource Type:: Technical Report
Full Text:: . . . . . . . . . . . . . 5 Availability During the Next Twenty Years . . . . . . . . . . . 5 WOOD RESIDUES

Wood-using industries of the upper Willamette resource conservation & development project : a utilization report & directory

Creator:: Cruickshank, E. Douglas and Upper Willamette Resource Conservation and Development Project
Resource Type:: Technical Report
Full Text:: . . . . . . . . . . . . . . . . . ......... i Area 14ap . . . ......... . ........ 2 Directory Guide .......... 3 Trends of the Wood-Using

Service life of treated and untreated fence posts : 1976 progress report on the post farm

Creator:: Miller, Donald James, Graham, Robert D., and Oregon State University. Forest Research Laboratory
Abstract:: Eight series of untreated posts (including five series of steel), 18 series of nonpressure-treated posts, and II series of pressure-treated posts remain in test at the Oregon State University post farm in western Oregon. So far all posts have failed in 36 untreated series, 33 nonpressure-treated series, and 2 pressure-treated...
Resource Type:: Technical Report
Full Text:: Test specimens I Post inspections I Post-farm records I Climatic conditions 2 Wood-destroying

Wood-metal corrosion : an annotated survey

Creator:: Graham, R. D. (Robert D.), Wilson, M. M., Oteng-Amoako, A., and Oregon State University. Forest Research Laboratory
Resource Type:: Technical Report
Full Text:: purposes should be made at the same testing speed; and the general equation in the Wood Handbook

Surface renewal rate for the absorption of odoriferous sulfur compounds in a wetted wall column

Creator:: Hovey, Leonard LeRoy
Resource Type:: Dissertation

ScholarsArchive@OSU

Model and procedure for determination of strength and stiffness of wood studs

The effect of wood density on the kraft pulping properties of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco)

Wood and bark residues in Oregon : trends in their use

Flexural tests of large glued-laminated beams made from visually graded hem-fir lumber

Mill and woods residues tributary to Eugene, Oregon available for steam generation

Wood-using industries of the upper Willamette resource conservation & development project : a utilization report & directory

Service life of treated and untreated fence posts : 1976 progress report on the post farm

Wood-metal corrosion : an annotated survey

Surface renewal rate for the absorption of odoriferous sulfur compounds in a wetted wall column

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search