Index Catalog // ScholarsArchive@OSU

Evaluating the efficiency of Decon Gel 1101 for removal of Cs-137, Co-60, and Eu-154 on common commercial construction materials

Creator:: VanHorne-Sealy, Jama D.
Abstract:: Decon Gel 1101, is an uncomplicated, low odor, peelable polymer hydrogel for use with radiological decontamination, manufactured by Cellular Bioengineer Inc. The gel allows for single or multiple material applications to contaminated surfaces. As the gel dries it binds the contaminant by encapsulating and lifting the contaminant into the gel....
Resource Type:: Masters Thesis
Full Text:: /production of airborne contaminates; generally minimal effect on equipment; and relatively low expense and

Wind Farming vs Mobile Gear Fishing: is there room for a bargain?

Creator:: Wiersma, Joshua
Abstract:: A private power company, Cape Wind Inc., wants to develop the largest wind farm in United States history off the coast of Cape Cod Massachusetts in a twenty-five square mile area of Nantucket Sound known as Horseshoe Shoal (HSS). However, Cape Wind must compete for the use of this area...
Resource Type:: Other
Full Text:: coast of Cape Cod Massachusetts in a twenty-five square mile area of Nantucket Sound known as

Performance evaluation of heterogeneous wireless local area network systems

Creator:: Paotrakool, Kittiporn
Abstract:: The market for Wireless Local Area Networks (WLANs) has experienced tremendous growth over the last few years and this trend is expected to continue in the future. This growth is due to the fact that wireless LANs provide several benefits including mobility, efficiency, and accuracy. In addition, the cost of...
Resource Type:: Masters Thesis
Full Text:: facilitating test equipment and kindly suggestions. I also would like to thank my friends, Esteban Altamirano

Implementation of radiation film dosimetry system to be used for the verification of a 3-D electron pencil-beam algorithm on a radiation treatment planning system

Creator:: Jones, Quyen L.
Abstract:: Radiation film dosimetry process using the RIT 113 v.4 dosimetry software and the film digitizer VXR-l2plus was used to evaluate the accuracy of electron dose calculations of the RAHD radiation therapy treatment planning system at Samaritan Regional Cancer Center. Kodak Ready-Pack EDR-2 film is recommended for dose distribution analysis in...
Resource Type:: Masters Thesis
Full Text:: sophisticated scanning equipment and software. The RIT1 13 system consists of hardware and software for film

An artificial neural network approach to laser-based direct part marking of data matrix symbols

Creator:: Jangsombatsiri, Witaya
Abstract:: Certain applications have recently appeared in industry where a traditional bar code printed on a label will not survive because the item to be tracked has to be exposed to harsh environments. Laser direct-part marking is a manufacturing process used to create permanent marks on a substrate that could help...
Resource Type:: Dissertation
Full Text:: ), Semiconductor Equipment and Materials International (SEMI), Electronics Industry Association (ETA), Automatic

Development of an autonomous in-situ instrument for long-term monitoring of Cu(II) in the marine environment

Creator:: Holm, Christopher E.
Abstract:: An autonomous, in-situ instrument was developed to detect dissolved copper in seawater, suitable for deployment on time scales from weeks to months. A commercially available in-situ nitrate analyzer (YSI 9600) was adapted to measure copper (II) in seawater by chemiluminescence. Modifications included construction of a photomultiplier (PMT) based detector and...
Resource Type:: Masters Thesis
Full Text:: supply sample, carrier fluid (pH 3 Milli-Q), R-2, and 10% hydrogen peroxide. Pump tubing (Fisher

The quantitative evaluation of radiological workplace indicators

Creator:: Brock, Terry A.
Abstract:: Two research studies at the U.S. Department of Energy's Hanford Site and Rocky Flats Environmental Technology Site (RFETS) explore the quantitative relationship between surface contamination, airborne radioactivity, worker intakes, and subsequent dose. In the first study, resuspension factors are developed and evaluated at the U.S. Department of Energy's (U.S. DOE)...
Resource Type:: Dissertation
Full Text:: studies at the U.S. Department of Energy's Hanford Site and Rocky Flats Environmental Technology Site

Improved efficiency in medium-power flyback converters

Creator:: Ruttanapaibooncharoen, Surin
Abstract:: Switch-mode power supplies (SMPS's) not only convert energy, they also consume it. Typical operational efficiencies are approximately 25 to 60% for linear power supplies, and approximately 50-90% for switching power supplies. This means that products whose end-use electronics are dc, such as televisions and DVD players, could consume 50% less...
Resource Type:: Masters Thesis
Full Text:: electronics, and lightweight portable equipment and modules. The drawbacks are that this power supply

Design of a mechanically assisted dependent transfer mechanism for use on board commercial aircraft

Creator:: Gibson, Brenton D.
Abstract:: Business and recreation in the modern day world often include air travel as their cornerstone. Travelers who are disabled and wheelchair bound have to undergo a transfer process to board and deplane a commercial aircraft. This transfer process is typically done manually, with agents physically lifting the passenger who is...
Resource Type:: Masters Thesis
Full Text:: equipment, and the implementation of a no‐lift policy, there was an observed 31 percent

Novel architecture for entrapment of elastomeric membranes in microfluidic systems

Creator:: Blackwell, Edward P.
Abstract:: This thesis presents a novel microlamination architecture that enables the large scale integration of valves into low cost micro energy and chemical systems via membrane entrapment. Polycarbonate layers embossed with microfluidic channels were bonded by ultrasonic welding of raised embossed protrusions that penetrate though the PDMS membranes. The bonding pressure...
Resource Type:: Masters Thesis
Full Text:: machining, setting up fabrication, testing equipment, and other lab activities Vincent Remcho for help

ScholarsArchive@OSU

Evaluating the efficiency of Decon Gel 1101 for removal of Cs-137, Co-60, and Eu-154 on common commercial construction materials

Wind Farming vs Mobile Gear Fishing: is there room for a bargain?

Performance evaluation of heterogeneous wireless local area network systems

Implementation of radiation film dosimetry system to be used for the verification of a 3-D electron pencil-beam algorithm on a radiation treatment planning system

An artificial neural network approach to laser-based direct part marking of data matrix symbols

Development of an autonomous in-situ instrument for long-term monitoring of Cu(II) in the marine environment

The quantitative evaluation of radiological workplace indicators

Improved efficiency in medium-power flyback converters

Design of a mechanically assisted dependent transfer mechanism for use on board commercial aircraft

Novel architecture for entrapment of elastomeric membranes in microfluidic systems

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search