This paper covers the impact of Franklin D Roosevelt's, "Indian New Deal"
and the effect it had on federally recognized Indian tribes. I have taken an
in-depth look at specific areas of New Deal legislation including the Indian
Reorganization Act, the Johnson O'Malley Act, and the Indian Arts and
Crafts...
Depth-profiled Doppler broadening spectroscopy of positron annihilation on the cyclic fatigue-induced fracture surfaces of three amorphous Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ metallic glass specimens reveals the presence of a 30–50 nm layer of increased free volume that is generated by the propagating fatigue crack tip. The presence and character of this fatigue transformation zone...
The miniaturization of Microtechnology-based Energy, Chemical and Biological Systems (MECS) is made possible by the use of high aspect ratio microchannel arrays to increase the surface-area-to-volume ratio of the flow conduits within the devices, resulting in an improvement in the heat and mass transfer performance of the devices. However, advantages...
The development of amorphous metal alloys with high glass forming ability allows the fabrication of amorphous samples with thickness greater than 1mm, known as bulk metallic glasses(BMGs). Outstanding mechanical properties and ease in processing due to low melting points, low solidification shrinkage and higher supercooled liquid region make BMG a...
Shoot regeneration in vitro is a difficult problem for cherry species. This study addressed three approaches to the problem, regeneration of adventitious shoots from roots and leaves of mature cherry clones, and from cotyledons of open-pollinated 'Royal Ann' cotyledons. Regeneration on roots occurred at a very low frequency. Adventitious shoots...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
The influence of shear rate and temperature on the viscosity and fragility of the Zr₄₁.₂Ti₁₃.₈Cu₁₂.₅Ni₁₀.₀Be₂₂.₅ (Vit1) metallic glass forming liquid is measured in the liquid and undercooled liquid state between 907 and 1300 K. The results show a complex rheological behavior of Vit1. The viscosity of Vit1 is about three...
The present study investigated whether vitamin E supplementation reduced oxidative stress in erythrocytes and improved vitamin E status in patients undergoing hemodialysis (HD). Plasma and erythrocyte α-tocopherol, plasma ascorbic acid, and iron status were determined in 11 regular HD patients prior to and post-dialysis, before and during oral supplementation of...
The effect of ambient environment on the fatigue behavior of two Zr-Ti-Cu-Ni-Be bulk metallic glasses (BMGs) is examined in the present study. The first metallic glass, Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅, was tested to establish the presence of an environmental effect in the fatigue growth curve measured in ambient air. Fatigue growth curves produced...
Among recently found multi-component Zr-based bulk metallic glasses (BMG), Zr₅₈.₅Cu₁₅.₆Ni₁₂.₈Al₁₀.₃Nb₂.₈ is characterized by its lower critical cooling rate requirement and absence of beryllium as one of the constituent element which makes its handling more convenient. Its large supercooled liquid regions made possible the study of thermodynamics and kinetics of this...
Micro Powder injection molding (μPIM) is a cost-effective technique for
producing small, complex, precision parts in high volumes from ceramic and
metal nanoparticles. This study focuses on research conducted on fabrication of
Micro Ceramic Arrays (MCAs) parts using μPIM. MCAs are widely used as the
major components and design features...
Trichloroethene (TCE) is the most frequently detected organic contaminant in groundwater, is classified as a probable human carcinogen, and exhibits toxicological effects on the human endocrine, immune, developmental, and reproductive systems. While significant research efforts have been devoted to the development of strategies for remediating TCE-contaminated groundwater, their advancement is...
Deformation of metallic glasses requires the existence of free volume to allow atomic movement under mechanical loading. Accordingly, the present research seeks to understand how free volume variations in alloys of identical compositions affect the fatigue and fracture behavior. By annealing below the glass transition temperature, the free volume of...
Due to the aluminum industry demands, a large effort has recently been devoted to the development of special alloys to be used as inert anodes for a newly designed aluminum reduction cell. The implementation of this new technology aims at the replacement of the graphite anodes that have been used...
A high temperature high vacuum rheometer has been designed, fabricated,
and tested for the study of the steady shear viscosity for multicomponent bulk
metallic glass forming alloys. This rheometer has an operating range up to
1525 K, rotational frequencies of 9.4*10⁻³-3.7*10¹ radians/s, and a
calibrated viscosity range of 9.6*10⁻³ and...
Nitrosomonas europaea carries out the first step in the biological nitrogen removal process in wastewater treatment by oxidizing ammonia to nitrite. It has been shown to be sensitive to a wide range of contaminants. The antibiotic oxytetracycline and the heavy metals chromium and silver have been found in wastewater influent....
Powder injection molding (PIM) is a net fabrication technique that combines the
complex shape-forming ability of plastic injection molding, the precision of die-casting,
and the material selection flexibility of powder metallurgy. For this
study, the design issues related to PIM for fabrication of thin-walled high-aspect
ratio geometries were investigated. These...
A comprehensive tribal-level classification for the world's subfamilies of Hesperiidae, the skipper butterflies, is proposed for the first time. Phylogenetic relationships between tribes and subfamilies are inferred using DNA sequence data from three gene regions: 943 bp of cytochrome oxidase subunit I (COI) (in the mitochondrial genome), 739 bp of...