Powder injection molding (PIM) is a net fabrication technique that combines the
complex shape-forming ability of plastic injection molding, the precision of die-casting,
and the material selection flexibility of powder metallurgy. For this
study, the design issues related to PIM for fabrication of thin-walled high-aspect
ratio geometries were investigated. These...
Depth-profiled Doppler broadening spectroscopy of positron annihilation on the cyclic fatigue-induced fracture surfaces of three amorphous Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ metallic glass specimens reveals the presence of a 30–50 nm layer of increased free volume that is generated by the propagating fatigue crack tip. The presence and character of this fatigue transformation zone...
Shoot regeneration in vitro is a difficult problem for cherry species. This study addressed three approaches to the problem, regeneration of adventitious shoots from roots and leaves of mature cherry clones, and from cotyledons of open-pollinated 'Royal Ann' cotyledons. Regeneration on roots occurred at a very low frequency. Adventitious shoots...
The miniaturization of Microtechnology-based Energy, Chemical and Biological Systems (MECS) is made possible by the use of high aspect ratio microchannel arrays to increase the surface-area-to-volume ratio of the flow conduits within the devices, resulting in an improvement in the heat and mass transfer performance of the devices. However, advantages...
The effect of ambient environment on the fatigue behavior of two Zr-Ti-Cu-Ni-Be bulk metallic glasses (BMGs) is examined in the present study. The first metallic glass, Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅, was tested to establish the presence of an environmental effect in the fatigue growth curve measured in ambient air. Fatigue growth curves produced...
Deformation of metallic glasses requires the existence of free volume to allow atomic movement under mechanical loading. Accordingly, the present research seeks to understand how free volume variations in alloys of identical compositions affect the fatigue and fracture behavior. By annealing below the glass transition temperature, the free volume of...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
Trichloroethene (TCE) is the most frequently detected organic contaminant in groundwater, is classified as a probable human carcinogen, and exhibits toxicological effects on the human endocrine, immune, developmental, and reproductive systems. While significant research efforts have been devoted to the development of strategies for remediating TCE-contaminated groundwater, their advancement is...
The influence of shear rate and temperature on the viscosity and fragility of the Zr₄₁.₂Ti₁₃.₈Cu₁₂.₅Ni₁₀.₀Be₂₂.₅ (Vit1) metallic glass forming liquid is measured in the liquid and undercooled liquid state between 907 and 1300 K. The results show a complex rheological behavior of Vit1. The viscosity of Vit1 is about three...