Large numbers of 1950's vintage conventionally reinforced concrete (CRC) bridges remain in-service in the national bridge inventory. Many of these bridges are lightly reinforced for shear. Evaluation of these bridges to prevent unnecessary and costly repairs requires refined analytical techniques. This dissertation presents finite element (FE) modeling and comparisons of...
Three-dimensional finite element models are developed to simulate the behavior of four fill-scale reinforced concrete beams. The beams are constructed with different fiber-reinforced polymer (FRP) strengthening schemes, and are modeled using ANSYS, a commercially available finite element analysis program. The experimental beams replicate the transverse beams of the Horsetail Creek...
Fiber reinforced polymers (FRP) are becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge members. Once installed, the repair may be exposed to millions of load cycles during service life. The anticipated life of FRP repairs for shear strengthening of bridge members under repeated service...
Performance evaluation of conventionally reinforced concrete (CRC) bridge superstructure elements with diagonal cracks is of interest to the bridge engineering community. Standardized methods to predict service-level stress magnitudes in cracked bridge girders under combined bending and shear forces are not available. An analysis procedure was developed to determine the response...
The research presented here is a study to determine the effect of shear reinforcement corrosion on the shear capacity in conventionally reinforced concrete (CRC) bridge elements. A total of 14 CRC beams were tested using three stirrup spacings (8, 10, and 12-inch). Six of the beams included the influence of...