Roundabouts have become an alternative for traditional intersections due to the safer operational performance. Previous research has provided crash modification factors (CMFs) as a criterion based on before-after studies as to evaluate the safety performance of roundabouts. One drawback of assessment based on crash modification factors, however, is that a...
It has been suggested that projects in the construction industry are subject to risks more than other industries. However, there is often little parity in allocation of risks in the construction industry. Usually, project participants allocate risks by aversion where owners tend to shift risks to the primary contractor, who...
Reflection of an obliquely incident solitary wave at a vertical wall is studied experimentally in the laboratory wave tank. Precision measurements of water-surface variations are achieved with the aid of laser-induced fluorescent (LIF) technique and detailed temporal and spatial features of the
Mach reflection are captured. During the development stage...
At signalized intersections, pedestrians are considered to be amongst the most vulnerable. When in the crosswalk at intersections without protected left-turn phasing, pedestrians are particularly at risk from left-turning vehicles. Until recently, a wide variety of indications were in use across the US to indicate a permissive left-turn condition to...
This thesis contains a manuscript describing the implementation of a high resolution wave forecasting model for the coasts of Washington and Oregon. The purpose of this project was to advance the wave predictive capabilities of the states of Oregon and the southwest part of Washington by including the effects of...
Driving simulation is widely accepted as a safe, effective, and economical alternative for investigating driver behavior in a variety of contexts. However, in order to apply simulator-based research results to real-world settings, the performance measures acquired through simulated driving experiments must first be validated. This research was aimed at validating...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
As the second largest river in the U.S., the entrance to the Columbia River is home to some of the most extreme wave conditions on the Pacific Coast. Winter storms commonly generate waves 6-8 m in height, which in combination with strong tidal currents, can produce dangerous navigation conditions. To...
Velocity measurements from drifter GPS records are assimilated and used in an ensemble-based inversion technique to extract the river bathymetry. The method is tested on a deep meandering reach and a shallow braided reach of the Kootenai River in Idaho, USA. The Regional Ocean Modeling System (ROMS) is used to...
This thesis investigates the effects of wave energy converters (WECs) on water waves through the analysis of extensive laboratory experiments, as well as subsequent numerical simulations. Data for the analysis was collected during the WEC-Array Experiments performed at the O.H. Hinsdale Wave Research Laboratory at Oregon State University, under co-operation...
The eventual deployment of wave energy converters (WECs) on a commercial scale will necessitate the grouping of devices into arrays or "wave farms," in order to minimize overhead costs of mooring, maintenance, installation, and electrical cabling for shoreward power delivery. Closely spaced WECs will interact hydrodynamically through diffracted and radiated...
The Type-II dilemma zone refers to the segment of roadway approaching an
intersection where drivers have difficulty deciding to stop or proceed through at
the onset of the circular yellow (CY) indication. Signalized intersection safety can
be improved when the dilemma zone is correctly identified and steps are taken to...
The Astoria-Megler Bridge is a 6.6 kilometer (4.1 mile) long bridge, connecting Oregon and Washington on US 101, with a continuous steel truss main span of 376 m (1232 ft). It is the second longest main span bridge of this type in the world. Due to vortex shedding, some of...
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
This thesis explores the relationship between crime, transportation network connectivity, and engineered facilities built to increase walkability through a case study of twenty-five sites within the city of Spokane, Washington. Using data spanning between 2008 and 2010, the author developed a GIS model representing conditions of the built environment, social...
Three-dimensional laser scanning has revolutionized spatial data acquisition and can be completed from a variety of platforms including airborne (ALS), mobile (MLS), and static terrestrial (TLS) laser scanning. MLS is a rapidly evolving technology that provides increases in efficiency and safety over static TLS, while still providing similar levels of...
The purpose of this thesis is to examine and compare sustainable design methods used in the United States and Chile, focusing on sustainable materials and certification programs, to see if sustainable design methods used in the United States can be implemented in Chile to further its sustainable development. Through literature...
Operating speed is one of the best performance measures that can tell transportation agencies how well or how poorly the transportation system is functioning. Fluctuating operating speeds often mean there is a design flaw or something about the physical road design that violates drivers' expectations. A primary example of this...
Throughout the Holocene, appreciable changes in bathymetry are hypothesized to have resulted in large changes to tidal datums in coastal and estuarine areas. An understanding of tidal change is an important contribution to the knowledge of relative historical sea-level change and future coastal planning. To test this hypothesis, the Advanced...
This thesis focuses on shared use lane facilities and road user understanding. Shared use lanes (sharrows) are a common solution for road facilities that are too narrow to accommodate a full bicycle lane and where the local jurisdiction wants to reduce dooring crashes. In recent years, engineers have focused on...
With the growing trend in use of 3D laser scanning technology for data collection, it is important to study the various potential applications of this revolutionary technology. One such application is the measurement of road roughness at both large and small scales. At larger extents, terrestrial laser scanning (TLS) is...
Helical anchors are a type of deep foundation element that can be installed quickly in almost any location and can accept the immediate application of operational loads. The use of helical anchors has expanded in recent decades from its established application in the power transmission industry to more traditional civil...
Posting advisory speed signs at sharp horizontal curve sites is a practice well established in the United States. The purpose of these signs is to provide the driving public with a safe speed to negotiate such curves; however, the link between these signs and safety has not yet been clearly...
During the past several decades, earthquakes have caused extensive damage to
buildings, including wood-frame, single-family dwellings, in the United States. In
order to mitigate future losses, existing buildings in earthquake prone areas should be
evaluated for their seismic safety. This is also an important issue for buildings in
Oregon due...
Pile caps are structural elements used to transmit loads from structural columns into pile groups. A pile cap is generally constructed of reinforced concrete and contains only minimal flexural reinforcing steel. Using modern design methods, the anchorage of the flexural steel may limit the design capacity of existing pile caps....
Since 2004 there have been multiple devastating tsunamis around the globe triggered by large magnitude earthquakes; with the most recent being the Tohoku, Japan tsunami in March 2011. These tsunamis have caused significant loss of life and damage to the coastal communities impacted by these powerful waves. The resulting devastation...
The collapse of the I-35W Bridge in Minneapolis, MN on August 1, 2007 brought into question the design and inspection of gusset plates in steel truss bridges. The experimental tests performed in this research study the sway-buckling strength and behavior of large-scale steel gusset plates in an isolated truss connection....
Shallow foundations are extensively used to support structures of all sizes and derive their support from near surface soils. Thus, they are typically embedded up to a few meters into the soil profile. Designers of shallow foundations are required to meet two limit states: overall failure of the soil beneath...
The use of fly ash as a supplementary cementitious material (SCM) has increased in the last century due to its various environmental benefits as a recycled product. Within the last 60 years, it has been found that it can be used to effectively control damage induced by Alkali-Silica Reaction. However,...
Deep foundations, including driven piles, are used to support vertical loads of structures and applied lateral forces. Many pile supported structures, including bridges, are subjected to large lateral loads in the form of wind, wave, seismic, and traffic impact loads. In many practical situations, structures subjected to lateral loading are...
Using recycled concrete aggregate (RCA) as a replacement for natural aggregate in new concrete is a promising way to increase the overall sustainability of new concrete. This has been hindered, however, by a general perception that RCA is a sub-standard material due to the lack of technical guidance, specifically related...