The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
Use of basalt aquifers for aquifer storage and recovery (ASR) systems is increasing in the Pacific Northwest due to the large aerial extent of the Columbia River Basalt Group and the suitability of basalts as ASR reservoirs. However, the degradation of trihalomethanes (THMs), potentially carcinogenic disinfection by-products present in the...
Isolated approaches at signalized intersections with posted speed limits of 45 mph or greater generally experience large numbers of rear-end and angle collisions. A combination of less attentive drivers, high operating speeds, and less than ideal intersection characteristics can result in crash frequencies well above expected rates. A number of...
Probability-based reliability methods have placed an increased emphasis on realistic simulation of structural behavior in bridge engineering. Uncertainty is present in every aspect of structural analysis. Aleatory uncertainties in the loading and load-carrying capacities, and epistemic uncertainties in mathematical idealization of bridge systems are the major contributors to uncertain structural...
Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines performance of common anchorage connection details for AASHTO Type III prestressed concrete girders used by some transportation agencies. Full-scale specimens were fabricated and tested...
This study considered collision data for Seattle, Washington and Portland, Oregon
in order to determine whether or not red light cameras are effective in reducing red light
running collisions. Red light running is extremely dangerous and is a leading cause of
urban automobile collisions in the United States. Red light...
Large numbers of reinforced concrete deck girder bridges that were constructed during the
interstate system expansion of the 1950s have developed diagonal cracking in the stems.
Compared to the present AASHTO-LRFD standards, the provisions of the 1950s allowed
for higher shear stress in the concrete, thus reducing the amount of...
Large numbers of vintage reinforced concrete deck-girder bridges remain in the national bridge inventory. Many of these exhibit diagonal cracking and other distress. Due to the design practices of the time, it is common to observe cracks at locations where flexural reinforcing steel is terminated along the span. The presence...
Originally used as a method to densify loose soils, controlled blasting has expanded its applicability to geotechnical engineering by becoming a research tool to physically generate liquefaction for full-scale in-situ tests, ranging from seismic performance of deep foundations to evaluating ground improvement techniques. Current methods used to design the blasting...
Different specimen preparation methods such as moist tamping, dry funnel deposition, slurry deposition, dry air pluviation have been reported in the literature to investigate the undrained behavior of silty sands. Similarly, different means have been used to densify the soils prepared with such methods. However, the influence of the densification...
In ¬¬¬¬2009 the Federal Motor Vehicle Safety Administration (FMCSA) conducted the “Safety Belt Usage by Commercial Motor Vehicle Drivers Survey” for the National Highway Traffic Safety Administration (NHTSA). The survey found that, nationally, 74% of commercial truck drivers wear their safety belts at all times. In the western region of...
This study explores the influence that the sustainability of hotels has on the choice of hotels. Because of recent concern about global warming and reducing energy consumption, many designers are planning sustainable buildings. But often attractiveness is sacrificed for the goal of making a building sustain in its environment. The...
For wood beams, it is often assumed that the neutral axis is located at the centroid of the
beam. The neutral axis of isotropic, homogeneous materials is located at the centroid of the
material, but wood is neither isotropic nor homogeneous. The varying grain patterns and
knots located throughout wood...
Posting advisory speed signs at sharp horizontal curve locations is a common practice in the U.S. These signs recommend drivers safe speeds to negotiate such curves. Literature indicates that adherence to advisory speeds is, in general, poor. Moreover, limited research is available that quantifies safety implications of these signs. This...
Fluid-structure interaction (FSI) is an interesting and challenging interdisciplinary area comprised of fields such as engineering- fluids/structures/solids, computational science, and mathematics. FSI has several practical engineering applications such as the design of coastal infrastructure (such as bridges, levees) subjected to harsh environments from natural forces such as tsunamis, storm surges,...
This dissertation presents the results of a research effort conducted to better understand the stress-strain, volume change, shear band formation, and strength characteristics of normally consolidated anisotropic clay under fully three-dimensional stress states. A series of consolidated drained true triaxial tests with a constant mean effective stress and constant Lode...
Alkali-silica reaction (ASR) is one of the leading causes of concrete deterioration throughout the world, and affects both structural and non-structural elements. Despite strong research efforts since its discovery by Stanton in the late 1930s, this deteriorating reaction is still not clearly understood nor are proper preventative measures effectively applied...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
Over the last decade the world has seen three major tsunamis strike the coasts of
Indonesia, Samoa, and Chile. These tsunamis have caused significant losses of life and
property on the coastal cities of these and nearby countries. The NEES (Network for
Earthquake Engineering Simulation) Housesmash project was created to...