Modern day digital systems employ frequency
synthesizers to provide a common clock to the system.
They are undergoing large scale integration due to which, mitigation
of the effect of noise on power supply has become a major design consideration
in clocking circuits. Rapid scaling of CMOS technology mandates the
design...
This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise.
In the calibration mode, the incremental ADC...
The objective of this thesis is to provide an initial demonstration of two-terminal and three-terminal electronic devices employing amorphous multi-component metallic film
(AMMF) electrodes. Such a demonstration is successfully achieved in the fabrication of metal-insulator-metal (MIM) diode and hot electron transistor (HETs) structures employing ZrCuAlNi AMMF electrodes. The ultra-smooth surface...
Various applications like wireless UWB communication, fast data acquisition systems and digital storage oscilloscopes needs ADCs with instantaneous input signal bandwidth from 0.1-40 GigaHertz range with 6-10 bits of resolution -- a challenging task and an impressive goal to achieve. Flash ADCs have been conventionally employed to achieve these goals...
Work on individually constructed devices has demonstrated that nanowires (NWs) offer great promise for applications such as sensing and optoelectronics. Despite this work, reliable large scale alignment and integration of these individual nanostructures into a lithographically defined process remains a challenge.
Dielectrophoresis (DEP) is a promising alignment method in which...
Magnetically programmable surface acoustic wave (MP SAW) devices were designed, fabricated and characterized in this thesis using integrated giant magnetoresistive (GMR) bits with interdigital reflectors. This provides a proof of concept of a novel storage element on radio frequency identification tags. Interdigital transducers (IDTs) on a piezoelectric substrate are used...
This thesis presents two new approaches for the broadband, time-domain modeling of lossy transmission lines. Each approach is based on an alternative derivation of delay extraction in order to separate the line's linear phase from its
attenuation and dispersion. Augmentation networks represent the derived attenuation networks as rational function approximations....
In wireless sensor network applications, low-power operation of the wireless receiver is critical. To address this need an ultra-low power Binary Frequency Shift Keying (BFSK) receiver using the super-regenerative architecture is developed.
A prototype receiver is built and tested for operation in the 900 MHz ISM band. Lab measurements show...
Error correction codes (ECCs) have been widely used in communication systems and storage devices. Nowadays, the rapid development of integrated circuit technologies makes feasible the implementation of powerful ECCs such as turbo code and low-density parity-check (LDPC) code. However, these high-performance codes require complex decoding algorithms, resulting in large hardware...
This research explores the viability and effectiveness of using an inertial navigation system (INS) to control a beamforming array of microstrip patch antennas with the aim of reducing users' exposure to electromagnetic radiation. The system reduces radiated power directed toward a cellular phone user to below 10% of the total...