The prevalence of Internet-of-Things (IoT) applications leads to an increasing focus on the design and optimization of sensor nodes. Battery lifetime and associated costs of battery replacement often limits the long term operation and viability of sensor nodes. RF wireless energy harvesting on the other hand can be appealing since...
Advances in process technologies have led to the development of low-power high speed digital signal processing blocks that occupy small areas. These advances are critical in the development of portable electronic devices with small feature size and long battery life. However, the design of analog and mixed-signal
building blocks, especially...
All-digital PLLs promise flexible and precise frequency modulation continous-wave(FMCW) radar signal signal for 77GHz radar applications. Such PLLs require digitally-controlled oscillators(DCO) with wide frequency tuning range and high resolution to address a range of applications and low phase noise requirements. In this thesis, novel resonator structures with ne capacitance/inductance switching...
For the past half century, CMOS process scaling has followed Moore's law, approximately doubling transistor density every 18 months. While locally routed wires have generally scaled with transistor size, longer wires have scaled at a slower rate and in some cases have grown larger as chip size and complexity have...
Modern day CMOS processes are characterized by voltage scaling and geometry scaling. Geometry scaling helps reduce gate delays, thereby aiding in the design of data converters which use time based processing. Another artifact of geometry scaling is the increase in complexity of digital circuitry available on traditional analog ICs, as...
This work presents the design and implementation of a low power phased-array receiver frontend at 28 GHz in 65 nm CMOS. The frontend incorporates a low- power low-noise amplifier(LNA) and a passive reflection-type phase shifter (RTPS) capable of providing 360° phase shift with 5-bit phase resolution and low loss variation....
The release of the IEEE802.15.6 standard has led to increased interest in low-power technologies for wireless body-area-networks (WBANs). The power dissipation, supply voltage, and die area are some of the most important criteria for successful WBAN implementations. Digital-intensive RX architectures can potentially result in sub-1V operation with significant reductions in...