One of the key challenges in downlink multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems is the mitigation of the multi-access interference when different users share the same subcarriers. In this work, the block diagonalization (BD) algorithm for inter-user interference pre-cancelation is extended to MIMO-OFDM systems. However, in...
With increasing transistor operating frequencies, interconnects and passive devices are becoming performance limiters in integrated circuit (IC) designs. To combat this, the interconnect layers above the active silicon are trending toward low-κ dielectrics and Cu metallization. The use of these new materials has popularized chemical mechanical polishing (CMP) to planarize...
Continual growth of the world's energy consumption and the demand for long-term clean renewable energy resources has led to the development of ocean-based wave energy technologies. Emerging technologies are advancing potential solutions to the complex problem of energy generation in the harsh and corrosive ocean environment. To develop these technologies,...
Recent developments in computing technology have generated a demand for more streamlined and effective test systems. By replacing traditional in-chassis wired interconnects with a broadcast wireless system, fault detection and error susceptibility will drastically improve, input/output capabilities will expand, and routing complexity will decrease. Ultra-wideband impulse radio's (UWB-IR) characteristic multipath-immunity...
This thesis describes the transport properties observed in thermally treated graphite oxide (GO), which holds promise as an economical route to obtaining graphene. Graphene is a material consisting of a single atomic plane of carbon atoms and was first isolated as recently as 2004. Several isolation techniques have been investigated,...
Engineering students spend a significant amount of their undergraduate careers focused on technical theory and practice. This intensive student prepares them for their technical challenges in the future. This training is so intense that often the more 'soft skills' such as communication, leadership, design, and troubleshooting are left out or...
Medical imaging technologies play a vital role in early diagnosis of disease by providing internal images of the human body to medical professionals. Computed Tomography (CT) is currently the most commonly used medical imaging technology because it is easy to use, detectors and scanners are constantly improving, and more importantly,...
Amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) constitute the central theme of this thesis. Within this theme, three primary areas of focus are pursued.
The first focus is the realization of a transparent three-stage ring oscillator with buffered output and an output frequency in the megahertz range. This leads to...
Multiple-input multiple-output wireless systems promise significant capacity gain
and/or diversity gain over single antenna systems. If channel state information (CSI)
is available at both the transmitter and the receiver, the performance can be further
improved. In this thesis, first, we study binary index feedback problem in beamforming
systems when the...
Recent advances in wireless technologies have helped the proliferation of wireless devices, ranging from hand-held devices such as cellular phones to more powerful mobile computing platforms as such laptops [1]. Along with that, the end users’
applications running on these devices, ranging from text message to multimedia applications such as...
This research explores the viability and effectiveness of using an inertial navigation system (INS) to control a beamforming array of microstrip patch antennas with the aim of reducing users' exposure to electromagnetic radiation. The system reduces radiated power directed toward a cellular phone user to below 10% of the total...
Error correction codes (ECCs) have been widely used in communication systems and storage devices. Nowadays, the rapid development of integrated circuit technologies makes feasible the implementation of powerful ECCs such as turbo code and low-density parity-check (LDPC) code. However, these high-performance codes require complex decoding algorithms, resulting in large hardware...
In wireless sensor network applications, low-power operation of the wireless receiver is critical. To address this need an ultra-low power Binary Frequency Shift Keying (BFSK) receiver using the super-regenerative architecture is developed.
A prototype receiver is built and tested for operation in the 900 MHz ISM band. Lab measurements show...
This thesis presents two new approaches for the broadband, time-domain modeling of lossy transmission lines. Each approach is based on an alternative derivation of delay extraction in order to separate the line's linear phase from its
attenuation and dispersion. Augmentation networks represent the derived attenuation networks as rational function approximations....
Magnetically programmable surface acoustic wave (MP SAW) devices were designed, fabricated and characterized in this thesis using integrated giant magnetoresistive (GMR) bits with interdigital reflectors. This provides a proof of concept of a novel storage element on radio frequency identification tags. Interdigital transducers (IDTs) on a piezoelectric substrate are used...
Work on individually constructed devices has demonstrated that nanowires (NWs) offer great promise for applications such as sensing and optoelectronics. Despite this work, reliable large scale alignment and integration of these individual nanostructures into a lithographically defined process remains a challenge.
Dielectrophoresis (DEP) is a promising alignment method in which...
Various applications like wireless UWB communication, fast data acquisition systems and digital storage oscilloscopes needs ADCs with instantaneous input signal bandwidth from 0.1-40 GigaHertz range with 6-10 bits of resolution -- a challenging task and an impressive goal to achieve. Flash ADCs have been conventionally employed to achieve these goals...
The objective of this thesis is to provide an initial demonstration of two-terminal and three-terminal electronic devices employing amorphous multi-component metallic film
(AMMF) electrodes. Such a demonstration is successfully achieved in the fabrication of metal-insulator-metal (MIM) diode and hot electron transistor (HETs) structures employing ZrCuAlNi AMMF electrodes. The ultra-smooth surface...
This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise.
In the calibration mode, the incremental ADC...
Modern day digital systems employ frequency
synthesizers to provide a common clock to the system.
They are undergoing large scale integration due to which, mitigation
of the effect of noise on power supply has become a major design consideration
in clocking circuits. Rapid scaling of CMOS technology mandates the
design...