Heat flux measurements of radiation emissions from turbulent premixed flames diluted with N 2 and CO 2 were taken to identify sensitivities of radiation heat loss to diluent fraction and species. This work is motivated by the desire to better characterise radiant heat transfer in the presence of combustion products,...
The SpiderHarp is a bio-inspired electronic musical instrument that uses a localization algorithm developed at Oregon State University to translate plucks of its strings into musical notes. This localization algorithm was inspired by the way spiders locate prey in their webs. The SpiderHarp frame, sensors, and web design are also...
To investigate the melting stage of indirect freeze desalination three numerical models were developed. A zeroth, first, and second order analyses modeled the melting of ice around the outside of a pipe as a function of time. The zeroth order analysis assumes the system to be steady state. The first...
Controllers for robotic systems can be complex and difficult to write by hand. Learning offers an approach to improve a controller through direct feedback. Learning is not trivial, as the feedback does not tell the agent how to improve, only how well its current actions solve the given task. Learning...
The leading edge of a sub-orbital, sounding rocket dictates an aerodynamically optimal profile which is difficult to manufacture. The university level offers no current standard to produce rocket nose cones made with pre-impregnated composites. Of particular interest is the molding technique used to fabricate a nose cone. The focus of...
Modern product development is a complex combination of multidisciplinary processes ranging from market research to design, engineering analysis, and logistics. The product development process has a significant impact on the success or failure of new product launches. The majority of consumer product launches fail, resulting in significant sunk cost in...
Unmanned Aerial System (UAS) technology is a rapidly developing technological marketspace. This thesis focuses on micro, tethered, coaxial UASs and the development of an electrically-tethered observation platform (ETOP). The thesis details the current status of the technology as well as current products on the market. Stability considerations, critical when adding...
Legged robots, while advancing quickly, have far to go before they can recover from major disturbances safely and consistently. Reflected inertia, which affects how quickly the actuators can physically respond to an environmental disturbance, and delay, which describes the time necessary for the controller to sense, re-plan, and respond to...
For the 2019 season, a new chassis layup was designed that is much stronger than in previous years, yet only slightly heavier. Compared to the baseline steel tube frame, the 2019 chassis has safety factors of about 110% for most zones. Also, a new impact attenuator was designed that absorbs...
The unsustainable use of fresh water sources and unavailability of fresh water in certain parts of the world have created a demand for water desalination systems. Desalination methods are effective at producing consumable water, but often require large scale setups, high energy consumption, and careful maintenance. A team of students...
The current knowledge on the microstructural evolutions and mechanical properties of selective laser melting (SLM) produced H13 tool steel components is limited. This research is focused on optimization of SLM processing parameters for H13 tool steel and investigation of microstructure and mechanical properties of H13 tool steel components after SLM...
Freeze desalination poses as a potential solution to many of the issues that accompany current desalination methods. The research detailed in this manuscript involves creating and analyzing a numerical model of the freezing operation of an indirect contact freeze-melting (FM) desalination system. In this initial analysis, pure water is frozen...
The purpose of this report is to detail the design and validation of a prototype robot that feeds biomass into a range of small household cookstoves at a programmable rate. Improved design and testing methods for the development of improved biomass cookstoves are needed to design stoves that alleviate the...
Energy from offshore wind could provide substantial power generation if further utilized. One area of significant research focus is in developing floating offshore wind devices, which would allow for wind energy to be gathered in deep water where driven monopile turbines are infeasible. However, floating offshore wind is not currently...
Marching band activities consist of both physically and cognitively demanding tasks. The demands that this activity has on players has largely been unstudied. The goal of this study was to investigate the effects of players’ experience level, role, and gender on the workload of marching band players via a field...
The Oregon State University (OSU) Experimental Sounding Rocket Association (ESRA) 30k Rocket Team is a student run rocket team that competes in the Intercollegiate Rocket Engineering Competition at Spaceport America. The goal of the competition is to launch a student designed, manufactured, and tested experimental sounding rocket to 30,000 ft...
Condensers are vital components of power plants and are often one of the most major cost concerns when planning construction. Generally speaking, the surface area required to dissipate the heat generated in the boiler is so great that enormous and expensive structures are necessary. The usage of a hybrid surface...
Microfluidics is an evolving field that focuses on the manipulation of small fluid volumes. Because of its micron-sized features, it is the basis for many lab-on-chip and point-of-care diagnostic devices. The devices are predominantly molded from polydimethylsiloxane (PDMS); however, production is a multi-hour or multi-day process that typically requires clean...
Modern walking robots have shown that dynamic gaits can be achieved without ankle motors. It seems logical that the additional control authority that they provide can be used to improve the stability of the walking gait against foot placement errors caused by low level control. This thesis develops and compares...
An Achilles tendon injury can be devastating. Surgical methods to bring the muscle to full strength are not always available. Proposed is an ankle foot orthosis (AFO) that is entirely passive (does not add energy to the system) and uses the mechanical advantages provided by the walking gait of a...
The Santo Tomas University Internment Camp Podcast tells the story of a prison camp run by the Japanese in the Philippines during World War Two, told through a scrapbook created by two internees named Frank and Mildred Miles. Consisting of two parts, an academic portion which focuses on the historical...
Inertial microfluidics refers to the manipulation of the location and velocity of particles suspended in microscale fluid flow without the introduction of outside forces. It has promising applications in flow cytometry and other biomedical technologies because of the potential for lowering cost and complexity relative to current particle focusing methods....
The goal of this project is to research an innovative rear wing design for Formula SAE and determine if the concept could be beneficial for automotive racing purposes. The research consists of three steps. First, sensitivity analyses using computational fluid dynamics (CFD) simulation were performed on multiple configurations. Next an...
Treatment of extrahepatic portosystemic shunts provides many options, including cellophane banding. These cellophane bands are secured with a ligation clip. Weck® offers two forms of these: the stainless steel Hemoclip, and the polymer Hem-o-lok. This in vitro study compares the mechanical strength of these two of types of clips by...
Human body flight is a relatively young sport with a largely undocumented history.
Human body flight is an umbrella term for any sport involving maneuvering one’s body in a
meaningful way through a column of relative wind. Human body flight includes skydiving,
which was the origin of human body flight,...
The purpose of this project was to design the 2016 combustion car drivetrain for Global Formula Racing (GFR). The goal of this project was to improve upon the 2015 drivetrain design by reducing complexity, weight, and maintenance time. To reduce complexity the spool was changed to a one piece system...
This project consists of the analysis, design, and manufacturing of the 2016 cooling system for Global Formula Racing’s combustion vehicle. Several water configurations were examined, using computational fluid dynamics (CFD) to estimate airflow and heat transfer calculations in MATLAB to estimate heat rejection through each concept. Data used to perform...
Recent interest in nano aerial vehicles (NAVs) has sparked an increase in research on the mechanics of biological flapping flight. The ability of NAVs to fly in confined spaces and perform tight maneuvers make them a valuable technological asset. Researching the mechanisms behind small-scale flapping flight promises progress toward the...
The purpose of this thesis was to understand the relation between the actual performance and the design performance of the manufacturing plane which was designed for the 2016 Design/Build/Fly competition. The actual performance was determined using an Arduino Uno based system with data from an accelerometer, gyroscope and pitot tube....
As global population and affluence continues to rise, demand for and disposal of
consumer products is increasing. Currently, there are established process that guide
designers to develop innovative products, but these products still have a large impact
on the environment. There is beginning to be an emphasis on product sustainability,...
This project created a stand-alone unit capable of providing on-board sensing and processing for robotic vehicles. This unit was designed to be compact, lightweight, inexpensive, and adaptable. The goal of this project is to help advance robotics research in mapping and multi-agent coordination by making it easier to equip vehicles...
Combustion systems for transportation applications typically use large hydrocarbon fuels in turbulent premixed or partially premixed environments. Combustion products can enter the reaction region through natural recirculation or combustion control mechanisms. The objective of this study is to characterize how dilution by combustion products affects the turbulent consumption speed for...
OSU’s Global Formula Racing (GFR) team creates two carbon fiber chassis each year, one for combustion engine powered the other electric. These two vehicles compete in SAE sanctioned competitions teams and in order to enter they both have to provide design and testing information to prove the vehicle is safe...
This project analyzes, tests, and redesigns an environmental control system for Global Formula Racing’s (GFR) dynamometer. It seeks to develop a working system to test GFR’s car engine under air conditions similar to those faced during competition. A model is developed to predict the performance of the environmental control system,...
Bird and bat collisions with wind turbine blades are an occurrence which are extremely variable in
frequency. With the expansion of wind farms, determining the true quantity of collisions and the
species involved is imperative for preventing ecological damage. Explored in this thesis is a blade
mounted camera for wirelessly...
The intent of this report is to provide a brief description of water quality issues in Nicaragua, Uganda and Bangladesh, and the technologies available to address these issues. The water quality parameters considered include: bacterial contamination, heavy metals and arsenic, pesticides and industrious chemicals, turbidity, radiological characteristics, and taste and...
The potential of red blood cell (RBC) and platelet damage was studied for a novel microfluidic hemoperfusion device currently in development at Oregon State University for use in treating sepsis. COMSOL 4.4's computational fluid dynamics (CFD) module was used to examine shear rate profiles in laminar, Newtonian blood flow throughout...
This study conducts follow up research to my Mechanical Engineering Senior Project that was completed in March 2015. It follows the Student Powered Hydro and Entertainment Device (SPHED) as it is used in various middle school and high school classrooms. SPHED has three modules: a power generation module, a hydropower...
This project examines the computational fluid dynamics (CFD) model used by Global Formula Racing (GFR) to simulate external aerodynamics for a Formula SAE racecar. It seeks to improve the accuracy of the existing model by changing mesh and physics model parameters. Accuracy of the model is quantified through comparison to...
The process of redesigning products in order to reduce their environmental impact is a challenging task because formalized methods in sustainable product design do not yet exist. There are many tools and methods that designers can use to be more informed of the sustainability of a product, but many are...
A new thermal management method for hotspots on microprocessors is under development that employs confined pool boiling with vapor extraction at pre-determined nucleation sites. Extraction is accomplished by locating a vacuum chamber constructed out of a glass tube and a hydrophobic membrane directly above a nucleation site. In order to...
There is a growing US interest in UAVs for many applications ranging from agriculture to military. One area of improvement that can be realized in each category is propulsion. Engines with greater efficiency would result in longer mission duration, leading to cost savings and increased usefulness for UAV owners and...
The ability to develop mobile applications for smartphones and tablets is an increasingly valuable skill in today’s labor market. This thesis details the development of the mobile application Drone Drop from beginning to finish. I first describe the background research conducted to learn about programming languages and other tools used...
The Formula Society of Automotive Engineers (FSAE) has provided a platform
for teams like Oregon State’s own Global Formula Racing Team (GFR) to produce a
formula style race car and compete with other schools across the world. The GFR team
has used the same carbon fiber monocoque chassis since the...
Formula Student challenges collegiate teams around the world to compete against one another in global racing competitions. Global Formula Racing (GFR) is a collaboration between Oregon State University and German at Duale Hochshule Baden- Wurttemberg Ravensburg students to build a racecar. The task assigned was to create a pedal assembly...
The purpose of this project is to examine the effect of the slot gap spacing on a multi element rear
wing. A three element rear wing is used in order to produce maximum downforce at the relatively
low speed of Formula SAE competitions. These high lift configurations serve to increase...
The ATRIAS agile humanoid robot, along with a number of other spring-mass walking
machines, currently have two instabilities: one resulting from inertial forces on the torso
which cause the robot to spin like a top, and another resulting from stiff ground collisions
which cause chattering of the point-contact toes. This...
An experimental framework for investigation of the effects of Micro Pin Fin Arrays (MPFA) on the fuel oxidation efficiency of catalytic combustion is presented in this thesis. Complete combustion of the fuel is essential for operation at maximum efficiency and high standards of environmental cleanliness desired in existing microscale combustion...
Modern electronics have created increased demand for innovative cooling solutions. Typical forced convective cooling systems consist of pumps that circulate cooling fluid. However pumps can be unwieldy for many applications. This research is a continuation of work done at Oregon State University and Auburn University on the passive pumping of...
The Oregon State University chapter of American Institute of Astronautics and Aeronautics competed in the Design/Build/Fly competition for the second time during the 2013/2014 school year. This chapter began at Oregon State in 2012 and still lacks an organized management system for the Design/Build/Fly team that could allow OSU to...
For many years, engine overhearing has been the major cause for vehicle breakdowns and engine malfunctions for most teams in Endurance events at Formula Society of Automotive Engineers (FSAE) Series competitions. Additionally, with a growing importance of aerodynamics to the overall success of the Global Formula Racing at these events,...
Every Spring and Summer, thousands of climbers attempt to summit Mt. Rainier. Many of them stop at Camp Muir, a base camp at 10,000 feet, where they can use restrooms, camp overnight, or refill water bottles before continuing their climb. Camp Muir currently uses a gas system to melt snow...
Extensive research has been conducted to improve the menus that allow navigation of digital world, most of it focused on the most common varieties of menu. Radial menus, a less common menu variety designed so that menu entries are aligned on a polar coordinate system, have largely been ignored. Early...
A combined experimental and computational fluid dynamics (CFD) study of single-phase liquid nitrogen flow through a microscale pin-fin heat sink is presented. Such cryogenic heat sinks could find use in applications such as high performance computing, spacecraft thermal management, and hydrogen storage thermal management. A circular pin fin heat sink...
The Design/Build/Fly competition (DBF) is an annual aerospace engineering competition hosted by the American Institute of Aeronautics and Astronautics (AIAA). Oregon State University's AIAA chapter competed for the first time at DBF in 2013 and finished in the top 25% which is a respectable finish for a first year team....
A student-built lap time simulation coupled with the scoring model of the Formula Society of Automotive Engineers (SAE) Series has revealed the major importance of downforce on overall points. As a result, the Global Formula Racing (GFR) team has recently focused much effort towards the development of an aerodynamics package...
This thesis serves as a literature review of dashboards that calls for further research in the area of Feedback Mechanisms (FMs). A dashboard, for the purposes of this paper is a display used to provide performance feedback to a user. An FM is the mechanism used in a dashboard to...
Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust two-phase heat transfer devices. A confined impinging jet is explored as...
The properties of (1-x)BaTiO3-xBi(Mg1/2Ti1/2)O3 (BT-BMT) ceramics were fabricated from reagent-grade ceramic powders by solid-state methods and investigated for solubility, relative permittivity, dielectric loss, polarization, and electromechanical strain. The solubility limit was found to be between x = 0.3 and 0.4. Ba-deficient samples were fabricated, corresponding to stable single-phase compositions; these...
This thesis consists of two papers in manuscript format. The first paper presents optical measurements of tsunami inundation through an urban waterfront in a laboratory wave basin. The physical model was constructed at 1:50 scale and was an idealization of the town of Seaside, Oregon. The paper presents an analysis...
Lead zirconate titanate (PZT) is well known to exhibit some of the strongest piezoelectric responses, explaining why it is at the heart of piezoelectric-based microelectromechanical systems (MEMS) research. The use of pulsed laser deposition (PLD) to synthesize PZT offers many advantages over alternative deposition techniques, mainly regarding its ability to...
The population of minority groups is on the rise in the US, yet still minorities are not proportionally represented in Science, Technology, Engineering, and Mathematics (STEM). Of these minorities there are 4 races/ethnicities that are vastly under represented: Blacks, Hispanics, American Indians/Native Alaskans, and Hawaiians/Pacific Islanders. For the US to...
This study is a comparison to establish similarities between the funding resources of college and university athletic bands. The secondary objective is to determine the funding potential that exists as a result of alumni relations. In order to obtain funding information for a variety of athletic band programs, a survey...
Computation of offset curves is an operation critical to many computer-aided design and manufacturing (CAD/CAM) applications. Though simple on the surface, differences between the straightforward mathematical definition and the demands of CAD/CAM environment in the formulation and expression of an offset curve create a problem for which only complicated, approximate...
The intent of this paper is to bring more attention to the mastery involved with film composition as an art form. The research focuses specifically on the life, style, influences, and works of John Williams as a conductor, film composer, and composer. It addresses his biography, filmography, and working relationships,...
After traveling to Africa and experiencing the struggles and confusion of interacting with a new culture, I saw the need for some sort of orientation device that would adequately prepare first timers, but also not be too lengthy and daunting for a person that will only be spending a few...
Wire and fiber ropes used in rigorous CBOS (cyclic bend over sheave)
applications were investigated. Small diameter stainless steel, tungsten, and Vectran®
ropes were tested over small sheaves at high loads and cycle speeds. Sheaves were made
with Al6061-T6511 and Al7075-T651 and were coated with 0.002” hard coat anodize;
some...
Using returnable bottles within a brewery setting can lower costs associated with
purchasing new bottles as well as reduce the energy associated with recycling glass
bottles. A commercial dishwasher was retrofit specifically to wash bottles. The design
and assembly of the piping flow network, testing of water flow through the...
Pulsed laser deposition was used to create 0.1-Bi(Zn₀.₅ Ti₀.₅)O₃-0.9-BaTiO₃ (BZT-BT) thin films to examine the effects of laser energy (2.25 or 2.5 J/cm²) , pulse frequency (2 Hz or 5 Hz), and deposition temperature (550, 600, 650, and 700°C) on the electrical properties of the films. These effects were analyzed...
A swing arm compressor was designed, built, and tested as an undergraduate senior design
project for Dr. Richard Peterson. The system developed, while not functioning entirely as
desired, gave some initial data and a good base of knowledge for a second iteration of the
project. This thesis describes in detail...
Low Reynolds number airfoils have become of interest recently for applications on Micro-air Vehicles (MAVs). Airfoils at low Reynolds numbers and high angles of attack are known to be unstable due to low lift to drag ratios. This study investigates the effect of a movable leading edge flap on the...
The world is currently using an unsustainable system of meeting its transportation
needs with oil. This system is taking a toll on the world environment and on global politics.
The physical availability of oil is the system’s most immediate problem and will most likely
bring about a transition away from...